Michell EA2-TX-M12 Easidew Dew-Point Transmitter M12 Connector

Description

Michell EA2-TX-M12 overview: Easidew dew-point transmitter with M12 connector

Michell EA2-TX-M12 is the parent order code of the Michell Easidew transmitter with an M12 electrical connector. The order-code sheet states that the M12 five-pin version outputs 4 to 20 mA and Modbus RTU over RS485, which makes it easy to read digital values as well as the analog loop.

The process connection is selected in the order code from G1/2 inch BSP, 3/4 inch UNF and 5/8 inch UNF, and the range, guard and optional oxygen cleaning are selected in further positions. The five-pin mating connector is not supplied and must be ordered separately.

The datasheet lists IP65 ingress protection for the M12 variant, a length of 155 mm with connector cable and a diameter of 45 mm.

The image shows Easidew transmitters from the manufacturer datasheet, the family that the Michell EA2-TX-M12 code orders.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We list EA2-TX-M12 so that maintenance, instrumentation and procurement teams can quote the exact code that appears in the manufacturer documentation.

Key features of EA2-TX-M12

  • M12 five-pin A-coded electrical connector with 4-20 mA and Modbus RTU over RS485 outputs.
  • Process connection choice: G1/2 BSP, 3/4 inch UNF or 5/8 inch UNF.
  • Range minus 100 or minus 110 to plus 20 degrees Celsius dew point with non-standard ranges available.
  • Stainless steel 316 housing, IP65 for the M12 variant, accuracy plus or minus 2 degrees Celsius dew point.
  • Optional M12 cables of 0.8, 2, 5 or 10 metres on the accessory list.
  • Sensor exchange service listed under EA2-TX-M12-X.

EA2-TX-M12 technical specifications

The table below lists values published by the manufacturer for the product family of EA2-TX-M12. Where a value depends on the ordered configuration, the table says so and the order-code sheet governs.

Parameter Value
Order code (parent) EA2-TX-M12, Easidew 2-wire dew-point transmitter (4-20 mA, M12 connector)
Measurement range Minus 110 to plus 20 degC dp or minus 100 to plus 20 degC dp
Accuracy Plus or minus 2 degC dew point
Output 4-20 mA two-wire; Modbus RTU over RS485
Supply voltage 12 to 28 V DC
Operating temperature Minus 40 to plus 60 degC
Operating pressure 45 MPa (450 barg) maximum
Ingress protection IP65 (M12 variant)
Electrical connection M12 5 pin (A coded); mating connector ordered separately
Dimensions Length 155 mm with connector cable, diameter 45 mm
Process connections 5/8 inch 18 UNF, 3/4 inch 16 UNF or G1/2 BSP
Weight 150 g

Typical applications of EA2-TX-M12 in Oman and the GCC

  • Compressed air dryers and dew-point monitoring where a digital link to a PLC is wanted.
  • Breathing air and additive manufacturing gas supply.
  • Hydrogen, inert and bulk gas monitoring.
  • Plants standardised on M12 sensor cabling.

In Oman and across the GCC, moisture measurement matters wherever gas has to stay dry: gas gathering and processing plants, LNG and gas-to-power facilities, refineries and petrochemical complexes, desalination and utility compressed-air systems, and industrial gas and hydrogen users. High ambient temperatures and humidity make dryer performance and sensor drift a real operating cost, so a transmitter such as EA2-TX-M12 is usually specified against a defined dew-point or ppmV target and a documented calibration.

Selection and compatibility notes

The EA2-TX-M12 order string has four required choices: connection B1, B2 or B3, range C1 or C2 (or a non-standard range), protection D1 for HDPE or D2 for sintered stainless steel, and an optional J1 oxygen cleaning that requires the sintered guard.

Order a matching mating connector or cable from the accessory list, because it is not supplied with the transmitter.

Confirm four things before ordering EA2-TX-M12: the dew-point or ppmV range you need, the process connection and sample handling arrangement, the hazardous-area certification that your site requires, and the electrical interface of your control system. Because Michell builds many variants from one parent code, quote the complete configured code from the order-code sheet where one applies, and tell us the operating pressure so that ppmV conversions are programmed correctly.

Installation and commissioning of EA2-TX-M12

Accessories on the order-code sheet include SB-12 and SB-34 stainless steel sample blocks, SB-12-QF and SB-58-QF quick-fit blocks for compressed air, adaptor collars and sampler kits EA2-SAM and EA2-SAM-HP.

Mount the sensor in a sampling arrangement that delivers a clean, representative gas stream at a controlled flow, keep sample lines short and use stainless steel or other low-adsorption tubing, and avoid dead legs, because trace moisture adsorbs on tubing walls and slows the response. Wire the 4-20 mA loop with screened cable, check loop supply and load against the datasheet limits, and allow the sensor to stabilise on dry gas before judging the first readings. Record the as-found reading and the calibration certificate number at commissioning.

Maintenance, calibration and service

Recalibration EA2-TX-Recal and service exchange EA2-TX-M12-X are listed, with bonded seals BS-58-PK5 and BS-12-PK5 and O-rings OR-34-PK5 as spares.

Ceramic moisture sensors are stable, but periodic verification keeps a dryer control loop honest. Plan recalibration or sensor exchange at the interval set by your quality system, inspect the sensor guard and seals at each visit, and replace guards that are clogged by particulates or contaminated by oil mist. If a reading drifts, check the sample system for leaks and condensate before suspecting the sensor.

Related products and ordering notes for EA2-TX-M12

  • EA2-TX: MiniDIN version with 5/8 inch UNF thread.
  • EA34-TX: Easidew 34 with 3/4 inch UNF thread.
  • SF82-TX: SF82 transmitter with fast response for dryer applications.

When you request EA2-TX-M12, tell us whether the item is for a new installation, a like-for-like replacement or a spares stock, because that changes which accessories and documents are worth adding to the same quotation. Our team can also check related codes from the same order-code sheet so that one RFQ covers the transmitter or analyzer, its consumables and its calibration needs.

Frequently asked questions about EA2-TX-M12

  • What is EA2-TX-M12? EA2-TX-M12 is the manufacturer parent code for the Easidew dew-point transmitter with an M12 five-pin connector.
  • What does EA2-TX-M12 suit? It suits compressed air and process gas dew-point measurement where an M12 connector and a Modbus RTU RS485 output are preferred.
  • Is the mating connector included with EA2-TX-M12? No. The order-code sheet states that the five-pin mating connector is not supplied and should be ordered separately from the accessory list.
  • What should I send with an RFQ for EA2-TX-M12? Send the part number EA2-TX-M12, the quantity, the full configuration or host instrument model and serial number, any certificate needs and the delivery location so we can prepare an accurate quotation. The manufacturer datasheet for the product family can accompany the quotation.

Documents and quotation

A manufacturer document is available for the product family of EA2-TX-M12 and we can send it with your quotation where the family datasheet applies. To request pricing and lead time, send an RFQ to Seven Star LLC with the part number EA2-TX-M12, the quantity, the full configuration or host-instrument details, the delivery location and any certificate requirements such as material certificates or calibration documents. We will confirm availability and respond with a quotation for EA2-TX-M12 in writing.

Other Models in the Michell Easidew Range

Seven Star LLC supplies models from the Michell Easidew range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Michell EA2-TX Easidew 2-Wire Dew-Point Transmitter 5/8 UNFHumidity & Dew Point InstrumentsView details
Michell EA2-TX-M12 Easidew Dew-Point Transmitter M12 ConnectorHumidity & Dew Point InstrumentsYou are viewing this model
Michell EA34-TX Easidew 34 Dew-Point Transmitter 3/4 UNFHumidity & Dew Point InstrumentsView details
Michell EA2-OL Easidew Online Dew-Point HygrometerHumidity & Dew Point InstrumentsView details
Datasheets & Documents
  • PDF Datasheet Michell EA2-TX-M12 Easidew Dew-Point Transmitter M12 Connector Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Michell Instruments is a British manufacturer of humidity and dew point instruments, founded in 1974 in Cambridge, England, by Andrew Michell and incorporated on 12 September 1974. It worked with Cambridge University scientists on an aluminium oxide dew point sensor and later developed chilled mirror hygrometers and hydrocarbon dew point analysers. Michell is based in Ely, Cambridgeshire, and is part of Process Sensing Technologies (PST).

Seven Star LLC lists Michell dew-point transmitters, the Condumax II analyzer and its replacement sensor parts, and supplies them to gas plants and compressed air users in Oman by exact order code.

MICHELL Instruments company profile

Founded 1974, Cambridge, England, by Andrew Michell
Headquarters Ely, Cambridgeshire, United Kingdom, since 2007
Ownership Process Sensing Technologies (PST)
Technology Ceramic and aluminium oxide moisture sensors, chilled mirror dew point, Condumax hydrocarbon dew point (licensed from Shell)
Product families Easidew and Promet dew point transmitters, S8000 and Optidew chilled mirror hygrometers, Condumax II hydrocarbon dew point analysers, MDM300 portable dew point meters, oxygen analysers

Milestones

  • 1974: Andrew Michell founds Michell Instruments in Cambridge.
  • 2007: The company moves to Ely, Cambridgeshire.
  • 2024: Michell marks 50 years, now as part of PST.

Michell product families on this page

The Condumax II is an automatic hydrocarbon dew-point analyzer for natural gas. Several of its parts are listed separately: the CD2-SCR-002 hydrocarbon dew-point sensor cell, the CD2-WDC-002 water dew-point sensor assembly and the CD2-SX-WDC-002, which is the exchange version of that water dew-point sensor. The Easidew line is represented by the Easidew EA2 dew point transmitter and by the Easidew PRO I.S., an intrinsically safe moisture transmitter for hazardous areas. A ceramic impedance moisture sensor module is also listed, the sensing element behind these transmitters.

Where Michell analyzers are used

Hydrocarbon and water dew point are contract quality parameters for natural gas, so the Condumax II is found at gas processing plants, pipeline entry points and custody transfer stations. Easidew transmitters monitor dryers for instrument air and industrial gases, glove boxes, and dry gas feeds to processes that cannot tolerate water.

MICHELL Instruments products we list

Family Examples
Gas Analyzer Systems Easidew PRO I.S. Intrinsically Safe Mois…, Michell CD2-WDC-002 Water Dew-Point Sens…, Michell Condumax II Hydrocarbon Dew-Poin…, Easidew EA2 Dew Point Transmitter, Michell OptiPEAK TDL600 Moisture in Natu…, Michell Promet EExd Process Moisture Ana…, Michell S8000 Precision Chilled Mirror H…
Gas Analyzer Accessories MICHELL CD2-SX-WDC-002 Water Dew-Point S…, Michell Ceramic Impedance Moisture Senso…, Michell Condumax II CD2-SCR-002 Hydrocar…

Ordering Michell parts: what we need

For Condumax II parts send the analyzer serial number and the part code, such as CD2-SCR-002, and state if a new assembly or the exchange item is wanted. For Easidew transmitters we need the measuring span in dew point or ppm, the process connection thread, the output signal, the operating pressure, the gas and the area certification. A photo of the label on the old transmitter usually answers most of these in one go.

Facts checked against UK Companies House records and PST's Michell 50-year material, October 2026.

FAQ

Questions about the Michell EA2-TX-M12 Easidew Dew-Point Transmitter

Answers from our engineering team on installation, compatibility and integration.

01What is EA2-TX-M12?
EA2-TX-M12 is the manufacturer parent code for the Easidew dew-point transmitter with an M12 five-pin connector.
02What does EA2-TX-M12 suit?
It suits compressed air and process gas dew-point measurement where an M12 connector and a Modbus RTU RS485 output are preferred.
03Is the mating connector included with EA2-TX-M12?
No. The order-code sheet states that the five-pin mating connector is not supplied and should be ordered separately from the accessory list.
04Can Seven Star LLC supply EA2-TX-M12 in Oman?
Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Send an RFQ with the part number, quantity and delivery location and we will confirm availability.
05What should I send with an RFQ for EA2-TX-M12?
Send the part number EA2-TX-M12, the quantity, the full configuration or host instrument model and serial number, any certificate needs and the delivery location so we can prepare an accurate quotation. The manufacturer datasheet for the product family can accompany the quotation.