- Automation & ControlView all 2,760 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: MICHELL Instruments
Michell EA-XP Easidew PRO XP Explosion-Proof Dew-Point Transmitter
Description
Michell EA-XP overview: explosion-proof moisture transmitter for process gas
The Michell EA-XP is the parent order code of the Easidew PRO XP for gases, an explosion-proof and flameproof moisture transmitter from Michell Instruments. It measures dew point or moisture content in process gas and gives the result as a two-wire 4-20 mA signal, with a measurement range of minus 110 to plus 20 degrees Celsius dew point and a stated accuracy of plus or minus 1 degree Celsius dew point between plus 20 and minus 60 degrees.
Michell designed the PRO XP so that one stocked unit can serve plants in different regions. The datasheet lists ATEX, UKCA, IECEx and cQPSus certification for the design, together with additional approvals including TRCU 012, Japan Ex, PESO for India, NEPSI for China and KCS for Korea. The sensing element is the manufacturer ceramic moisture sensor, and each transmitter ships with a traceable 13-point calibration certificate.
Process gas users in natural gas processing, LNG, hydrogen and refinery service look for the Michell EA-XP code because the order-code sheet builds the complete transmitter from a short string of letters. This page explains what the code covers so that you can request the right configuration.
The image on this page shows the Easidew PRO XP transmitter with display from the manufacturer datasheet, which is the product family that the EA-XP order code configures.
Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We list EA-XP so that maintenance, instrumentation and procurement teams can quote the exact code that appears in the manufacturer documentation.
Key features of EA-XP
- Dew-point range of minus 110 to plus 20 degrees Celsius, or minus 100 to plus 20 degrees Celsius, selected in the order code; non-standard ranges and ppmV or natural gas units can be programmed at order.
- Accuracy of plus or minus 1 degree Celsius dew point from plus 20 to minus 60 degrees and plus or minus 2 degrees from minus 60 to minus 110 degrees.
- Two-wire 4-20 mA output, user configurable over range, with factory-programmed fault levels of 23 mA for sensor fault, 4 mA under range and 20 mA over range.
- Process pressure rating of 450 barg (6527 psig) with a 3/4 inch 16 UNF process connection and a recessed Viton O-ring; Kalrez O-ring available for aromatic service.
- Cast aluminium housing in blue RAL 5009 or optional 316 stainless steel housing, IP66 and NEMA 4, with dual 3/4 inch NPT cable entries.
- Optional integral display, mounting bracket, sample block and cleaning for enriched oxygen service, all chosen in the order code.
- Service exchange and recalibration programmes listed by the manufacturer reduce downtime when sensors are due for calibration.
EA-XP technical specifications
The table below lists values published by the manufacturer for the product family of EA-XP. Where a value depends on the ordered configuration, the table says so and the order-code sheet governs.
| Parameter | Value |
|---|---|
| Order code (parent) | EA-XP, Easidew PRO XP for gases |
| Measurement range | Minus 110 to plus 20 degC dp or minus 100 to plus 20 degC dp |
| Accuracy | Plus or minus 1 degC dp (plus 20 to minus 60 degC); plus or minus 2 degC dp (minus 60 to minus 110 degC) |
| Response time | 5 minutes to T95 (dry to wet) |
| Repeatability | 0.5 degC dew point |
| Calibration | Traceable 13-point calibration certificate |
| Output | 4-20 mA, two-wire, current source |
| Supply voltage | 14 to 28 V DC |
| Load resistance | Maximum 250 ohm at 14 V; 500 ohm at 24 V |
| Operating temperature | Minus 40 to plus 60 degC; compensated minus 20 to plus 50 degC |
| Operating pressure | 45 MPa (450 barg) maximum |
| Flow rate | 1 to 5 Nl/min in standard sampling block; 0 to 10 m/s direct insertion |
| Ingress protection | IP66 (BS EN 60529); NEMA 4 |
| ATEX / UKCA marking | II 2 GD Ex db ia IIC T6 Gb; Ex tb IIIC T80 degC Db IP66; Tamb minus 20 to plus 70 degC |
| Process connection | 3/4 inch 16 UNF, 316 stainless steel, recessed Viton O-ring |
| Electrical connection | Dual 3/4 inch NPT gland |
| Weight | Aluminium 1.6 kg; 316 stainless steel 2.4 kg |
| Sensor guard | Stainless steel sintered guard standard (greater than 80 micron particulate); HDPE guard optional (greater than 10 micron) |
Typical applications of EA-XP in Oman and the GCC
- Natural gas processing and transmission where pipeline dew-point limits must be demonstrated.
- LNG and LPG production, and CNG production and dispensing.
- Hydrogen coolant monitoring and inert or bulk gas supply.
- Hydrocarbon refinery processing and polymer production.
- Biomethane gas production and heat treating furnaces.
In Oman and across the GCC, moisture measurement matters wherever gas has to stay dry: gas gathering and processing plants, LNG and gas-to-power facilities, refineries and petrochemical complexes, desalination and utility compressed-air systems, and industrial gas and hydrogen users. High ambient temperatures and humidity make dryer performance and sensor drift a real operating cost, so a transmitter such as EA-XP is usually specified against a defined dew-point or ppmV target and a documented calibration.
Selection and compatibility notes
The order-code sheet for EA-XP builds the transmitter from seven choices: display or no display, protection guard, sample block, mounting bracket, housing material, range, and oxygen or aromatic-service option. For example, one catalogue string describes a unit with no display, sintered guard, sample block, no bracket, aluminium housing and a minus 110 to plus 20 degree range, cleaned for oxygen service.
The 316 stainless steel housing is listed for ATEX, IECEx, UKCA and cQPSus class and division use only, so check whether your site needs the class and zone marking before choosing it. Material certificates to BS EN 10204 type 3.1, with an option including NACE conformity, are ordered as a separate line item.
For moisture in liquids the same family has a separate parent code, XP-LQ, which is programmed with saturation constants for the liquid being measured.
Confirm four things before ordering EA-XP: the dew-point or ppmV range you need, the process connection and sample handling arrangement, the hazardous-area certification that your site requires, and the electrical interface of your control system. Because Michell builds many variants from one parent code, quote the complete configured code from the order-code sheet where one applies, and tell us the operating pressure so that ppmV conversions are programmed correctly.
Installation and commissioning of EA-XP
The PRO XP uses a 3/4 inch UNF process connection with a dual-entry housing, so it can be fitted in a sample block or inserted directly into a line within the stated pressure and velocity limits. Support the housing with the optional bracket where vibration is expected.
Use certified cable glands and stopping plugs that match the explosion-protection certificate, and keep the cover and flame paths clean and undamaged when closing the housing.
Mount the sensor in a sampling arrangement that delivers a clean, representative gas stream at a controlled flow, keep sample lines short and use stainless steel or other low-adsorption tubing, and avoid dead legs, because trace moisture adsorbs on tubing walls and slows the response. Wire the 4-20 mA loop with screened cable, check loop supply and load against the datasheet limits, and allow the sensor to stabilise on dry gas before judging the first readings. Record the as-found reading and the calibration certificate number at commissioning.
Maintenance, calibration and service
The manufacturer lists a service exchange for the PRO XP and a recalibration service, both supplied with a traceable calibration certificate. Replacement parts named on the order-code sheet include the SSG sintered guard, OR-34-PK5 Viton O-rings, OR-34-KAL-PK1 Kalrez O-ring, XP-BRK bracket and XP-DIS-RK display module kit.
Ceramic moisture sensors are stable, but periodic verification keeps a dryer control loop honest. Plan recalibration or sensor exchange at the interval set by your quality system, inspect the sensor guard and seals at each visit, and replace guards that are clogged by particulates or contaminated by oil mist. If a reading drifts, check the sample system for leaks and condensate before suspecting the sensor.
Related products and ordering notes for EA-XP
- XP-LQ: Easidew PRO XP for liquids, same family.
- XP-DIS-RK: replacement display module kit for the Easidew PRO XP.
- SB-34: 3/4 inch UNF stainless steel sample block, and SSG replacement sintered guard, listed as accessories by the manufacturer.
- EPR-IS: Easidew PRO I.S. intrinsically safe transmitter for installations that need intrinsic safety rather than flameproof protection.
When you request EA-XP, tell us whether the item is for a new installation, a like-for-like replacement or a spares stock, because that changes which accessories and documents are worth adding to the same quotation. Our team can also check related codes from the same order-code sheet so that one RFQ covers the transmitter or analyzer, its consumables and its calibration needs.
Frequently asked questions about EA-XP
- What is EA-XP? EA-XP is the manufacturer parent order code for the Easidew PRO XP explosion-proof moisture transmitter for gases, with options chosen in a seven-part configuration string.
- What does EA-XP suit? It suits dew-point or moisture measurement in process gas in hazardous areas, such as natural gas, LNG, hydrogen and refinery streams, where ATEX, IECEx, UKCA or cQPSus certification is required.
- What output does EA-XP give? The transmitter gives a two-wire 4-20 mA output that is user configurable over range, with 23 mA for sensor fault, 4 mA for under range and 20 mA for over range as factory-programmed diagnostics.
- What should I send with an RFQ for EA-XP? Send the part number EA-XP, the quantity, the full configuration or host instrument model and serial number, any certificate needs and the delivery location so we can prepare an accurate quotation. The manufacturer datasheet for the product family can accompany the quotation.
Documents and quotation
A manufacturer document is available for the product family of EA-XP and we can send it with your quotation where the family datasheet applies. To request pricing and lead time, send an RFQ to Seven Star LLC with the part number EA-XP, the quantity, the full configuration or host-instrument details, the delivery location and any certificate requirements such as material certificates or calibration documents. We will confirm availability and respond with a quotation for EA-XP in writing.
Other Models in the Michell Easidew Pro Xp Range
Seven Star LLC supplies models from the Michell Easidew Pro Xp range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Michell EA-XP Easidew PRO XP Explosion-Proof Dew-Point Transmitter | Humidity & Dew Point Instruments | You are viewing this model |
| Michell XP-LQ Easidew PRO XP Moisture-in-Liquids Transmitter | Humidity & Dew Point Instruments | View details |
| Michell XP-DIS-RK Easidew PRO XP Replacement Display Module Kit | Humidity & Dew Point Instruments | View details |
Datasheets & Documents
- Datasheet Michell EA-XP Easidew PRO XP Explosion-Proof Dew-Point Transmitter Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Michell Instruments is a British manufacturer of humidity and dew point instruments, founded in 1974 in Cambridge, England, by Andrew Michell and incorporated on 12 September 1974. It worked with Cambridge University scientists on an aluminium oxide dew point sensor and later developed chilled mirror hygrometers and hydrocarbon dew point analysers. Michell is based in Ely, Cambridgeshire, and is part of Process Sensing Technologies (PST).
Seven Star LLC lists Michell dew-point transmitters, the Condumax II analyzer and its replacement sensor parts, and supplies them to gas plants and compressed air users in Oman by exact order code.
MICHELL Instruments company profile
| Founded | 1974, Cambridge, England, by Andrew Michell |
|---|---|
| Headquarters | Ely, Cambridgeshire, United Kingdom, since 2007 |
| Ownership | Process Sensing Technologies (PST) |
| Technology | Ceramic and aluminium oxide moisture sensors, chilled mirror dew point, Condumax hydrocarbon dew point (licensed from Shell) |
| Product families | Easidew and Promet dew point transmitters, S8000 and Optidew chilled mirror hygrometers, Condumax II hydrocarbon dew point analysers, MDM300 portable dew point meters, oxygen analysers |
Milestones
- 1974: Andrew Michell founds Michell Instruments in Cambridge.
- 2007: The company moves to Ely, Cambridgeshire.
- 2024: Michell marks 50 years, now as part of PST.
Michell product families on this page
The Condumax II is an automatic hydrocarbon dew-point analyzer for natural gas. Several of its parts are listed separately: the CD2-SCR-002 hydrocarbon dew-point sensor cell, the CD2-WDC-002 water dew-point sensor assembly and the CD2-SX-WDC-002, which is the exchange version of that water dew-point sensor. The Easidew line is represented by the Easidew EA2 dew point transmitter and by the Easidew PRO I.S., an intrinsically safe moisture transmitter for hazardous areas. A ceramic impedance moisture sensor module is also listed, the sensing element behind these transmitters.
Where Michell analyzers are used
Hydrocarbon and water dew point are contract quality parameters for natural gas, so the Condumax II is found at gas processing plants, pipeline entry points and custody transfer stations. Easidew transmitters monitor dryers for instrument air and industrial gases, glove boxes, and dry gas feeds to processes that cannot tolerate water.
MICHELL Instruments products we list
Ordering Michell parts: what we need
For Condumax II parts send the analyzer serial number and the part code, such as CD2-SCR-002, and state if a new assembly or the exchange item is wanted. For Easidew transmitters we need the measuring span in dew point or ppm, the process connection thread, the output signal, the operating pressure, the gas and the area certification. A photo of the label on the old transmitter usually answers most of these in one go.
Facts checked against UK Companies House records and PST's Michell 50-year material, October 2026.
Browse MICHELL Instruments products by category: Gas Analyzer Accessories, Gas Analyzer Systems.
FAQ
Questions about the Michell EA-XP Easidew PRO XP Explosion-Proof
Answers from our engineering team on installation, compatibility and integration.
01What is EA-XP?
EA-XP is the manufacturer parent order code for the Easidew PRO XP explosion-proof moisture transmitter for gases, with options chosen in a seven-part configuration string.
02What does EA-XP suit?
It suits dew-point or moisture measurement in process gas in hazardous areas, such as natural gas, LNG, hydrogen and refinery streams, where ATEX, IECEx, UKCA or cQPSus certification is required.
03What output does EA-XP give?
The transmitter gives a two-wire 4-20 mA output that is user configurable over range, with 23 mA for sensor fault, 4 mA for under range and 20 mA for over range as factory-programmed diagnostics.
04Can Seven Star LLC supply EA-XP in Oman?
Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Send an RFQ with the part number, quantity and delivery location and we will confirm availability.
05What should I send with an RFQ for EA-XP?
Send the part number EA-XP, the quantity, the full configuration or host instrument model and serial number, any certificate needs and the delivery location so we can prepare an accurate quotation. The manufacturer datasheet for the product family can accompany the quotation.


















Reviews
There are no reviews yet.