Brand:

IMI STI FCV-04-S1-00-S-22-U Flow Control Valve 1/4 inch Unidirectional

Description

IMI STI FCV-04-S1-00-S-22-U overview

The IMI STI FCV-04-S1-00-S-22-U is a model code of the IMI STI FCV flow control valve, an adjustable restrictor that limits the air flow in a pneumatic circuit. A setting screw adjusts the flow rate, which lets the user lengthen or shorten the stroking time of an actuator. This code has unidirectional control.

On the unidirectional type the restriction applies in one flow direction only, and a special internal orifice prevents the valve from closing completely, so a minimum fluid passage remains even with the setting screw fully screwed in. Reading the code against the model selection: size 04 is 1/4 inch, material S1 is stainless steel 316, copper free execution, painting 00 is not painted, temperature letter S is -20 to +70 degC, connection code 22 gives 1/4 inch supply and actuator connections, and option U is unidirectional control. The manual lists this model with the part number 114871.

The IMI STI FCV-04-S1-00-S-22-U model code is taken from the existing-products table of the manufacturer’s instruction manual, which lists each model with an IMI STI part number (114871). Quoting the full code matters because the same family is built in several sizes, materials, temperature ranges and options, and only the complete code identifies the exact unit.

Key features of the FCV-04-S1-00-S-22-U

  • Adjustable restrictor with a setting screw to tune actuator stroking time
  • Unidirectional control (restricts one direction with a minimum passage kept by an internal orifice)
  • 1/4 inch class body in stainless steel 316, copper free execution
  • CV in and CV out maximum 1.1 for this size
  • Working pressure 1 to 12 bar with design pressure 12 bar
  • Working temperature -20 to +85 degC across the family, extended -60 to +100 degC
  • Gasket materials NBR, Viton or fluorosilicone listed
  • Lifetime stated as 30 years

FCV-04-S1-00-S-22-U technical specifications

The table below lists the data for the FCV-04-S1-00-S-22-U taken from the manufacturer’s published documents. Values that are not stated by the manufacturer are left out on purpose.

Model code FCV-04-S1-00-S-22-U
IMI STI part number (manual) 114871
Size 1/4 inch
Body material Stainless steel 316, copper free execution
Painting Not painted (code 00)
Temperature code S: -20 to +70 degC
Connections Code 22: 1/4 inch supply and actuator connections
Control type U: Unidirectional control
CV in and CV out maximum 1.1
Working pressure 1 bar minimum, 12 bar maximum
Design pressure 12 bar
Extended temperature (family) -60 to +100 degC
Storage temperature (family) -40 to +95 degC
Fluid Air
Lifetime 30 years

The FCV family also offers an aluminum body, painted finishes (standard painting cycle CVA.01 or customised) and other temperature and connection codes in the manufacturer’s model selection; not every combination is available.

Typical applications in oil and gas, utilities, water and manufacturing

Refineries, petrochemical units and general manufacturing plants apply the FCV-04-S1-00-S-22-U to restrict air flow to a pneumatic actuator so that stroking speed can be set. Because the exact configuration affects performance, engineers normally confirm the supply pressure, temperature range and connection arrangement against the nameplate of the existing equipment before ordering.

In oil and gas facilities in Oman and across the GCC, the FCV-04-S1-00-S-22-U is typically found on actuator supply lines where stroking time must be limited. Pneumatic accessories decide how fast and how stably an actuator strokes, so they are specified together with the actuator and positioner. Production, gathering and processing sites in the desert and offshore installations value equipment whose behaviour is well documented and whose spare parts can be identified by a clear part number.

Power and desalination plants use the FCV-04-S1-00-S-22-U where reliable control or safety stroking is needed on steam, feedwater, bypass and cooling circuits. Utilities and water treatment operators also use this type of equipment for dampers, control valves and isolation valves driven by instrument air, and the FCV-04-S1-00-S-22-U helps maintenance teams keep like-for-like replacements on the shelf.

Selection and compatibility notes for the FCV-04-S1-00-S-22-U

Pick the size by the actuator air demand. The manual lists maximum CV values of 1.1, 2.9 and 7.65 for the 1/4 inch, 1/2 inch and 1 inch sizes, so the 1/4 inch FCV-04-S1-00-S-22-U suits flows up to a CV of 1.1.

Choose unidirectional control as needed. The unidirectional type limits the flow in one direction only, which is the usual way to slow only the opening or the closing stroke. The manual recommends tubing of 8 mm or 3/8 inch for pilot lines and tubing larger than the product thread size for supply and exhaust lines.

Check the supply medium and pressure, the ambient temperature range and any hazardous-area requirement before ordering the FCV-04-S1-00-S-22-U. If a certificate or approval is needed for the installation in Oman or elsewhere in the GCC, state it in the request so that it can be checked against the manufacturer’s documents rather than assumed.

Installation and commissioning of the FCV-04-S1-00-S-22-U

Install the FCV-04-S1-00-S-22-U in the pneumatic circuit using the connection layout of its model code. Use clean instrument air, support the tubing so that no load acts on the body, and check all joints for leakage. Adjust any setting screw gradually, measure the actuator stroking time, and lock the screw once the required time is reached.

The manual recommends tubing of 8 mm or 3/8 inch for pilot lines and tubing larger than the product thread size for supply and exhaust lines. Keep exhaust lines free of restrictions that the design does not intend, because a blocked exhaust changes the stroking time.

Record the model code, the part number and the final settings of the FCV-04-S1-00-S-22-U on the commissioning sheet so that future maintenance and any reorder can refer to the same data.

Maintenance and service for the FCV-04-S1-00-S-22-U

Plan periodic inspection of the FCV-04-S1-00-S-22-U according to the instruction manual of the manufacturer. Typical checks are leakage at joints, condition of the air supply, mechanical wear or contamination, and confirmation that the setting still gives the required response.

Poor air quality is the most common cause of pneumatic accessory problems, so keep filter regulators and dryers serviced upstream of the FCV-04-S1-00-S-22-U. Replace elastomer parts only with the materials specified for the application, and do not modify the unit in the field.

When a unit fails, identify the exact model code and part number from the nameplate before ordering a replacement. For the FCV-04-S1-00-S-22-U this removes the risk of receiving a body with a different size, material or temperature range.

Related products and ordering notes for the FCV-04-S1-00-S-22-U

Items that are commonly specified together with the FCV-04-S1-00-S-22-U include: ER exhaust regulator, SR and SRQ quick exhaust valves, BV big volume booster, SC/V pneumatic actuator, CRP-3/M positioner. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; product names and part numbers are used only to identify the items offered.

Lead times, availability and alternatives depend on the stock position at the time of the request. If the FCV-04-S1-00-S-22-U is not the exact configuration needed, send the nameplate data and we will suggest the closest match from the manufacturer’s published model selection.

FCV-04-S1-00-S-22-U frequently asked questions

What does the FCV-04-S1-00-S-22-U do? It is an adjustable restrictor in a pneumatic circuit. Its setting screw limits the air flow and so changes the actuator stroking time.

What does the U or B suffix mean on an FCV code? According to the model selection, U is unidirectional control and B is bidirectional control. This code ends in U.

What is the manufacturer part number for the FCV-04-S1-00-S-22-U? The instruction manual lists the model FCV-04-S1-00-S-22-U with the part number 114871.

What pressure range applies? The technical data list a working pressure of 1 bar minimum to 12 bar maximum, with a design pressure of 12 bar.

How do I order the FCV-04-S1-00-S-22-U? Send the part number FCV-04-S1-00-S-22-U with the quantity and any special requirement to Seven Star LLC and we will reply to your RFQ.

Documents and quotation

The manufacturer’s manual for the FCV-04-S1-00-S-22-U is available from Seven Star LLC on request and is listed on this page for download. It should be read together with the nameplate data of the installed equipment.

To request a quotation, send an RFQ with the part number FCV-04-S1-00-S-22-U, the quantity, the required delivery location in Oman or the GCC, and any special requirement such as certification or documentation. We will reply with availability and commercial terms.

Other Models in the FCV Range

Seven Star LLC supplies models from the FCV range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
IMI STI FCV-04-S1-00-S-22-U Flow Control Valve 1/4 inch UnidirectionalAutomation AccessoriesYou are viewing this model
IMI STI FCV-04-S1-00-S-22-B Flow Control Valve 1/4 inch BidirectionalAutomation AccessoriesView details
IMI STI FCV-08-S1-00-S-44-U Flow Control Valve 1/2 inch UnidirectionalAutomation AccessoriesView details
IMI STI FCV-08-S1-00-S-44-B Flow Control Valve 1/2 inch BidirectionalAutomation AccessoriesView details
IMI STI FCV-16-S1-00-S-66-U Flow Control Valve 1 inch UnidirectionalAutomation AccessoriesView details
IMI STI FCV-16-S1-00-S-66-B Flow Control Valve 1 inch BidirectionalAutomation AccessoriesView details
IMI STI FCV-16-S1-00-S-PP-U Flow Control Valve 1 inch UnidirectionalAutomation AccessoriesView details
Datasheets & Documents
  • PDF Manual IMI STI FCV-04-S1-00-S-22-U Flow Control Valve 1/4 inch Unidirectional Manual Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

IMI STI is an Italian manufacturer of pneumatic, hydraulic and direct-gas valve actuators, valve positioners and actuator accessories. It is based in Levate, near Bergamo, and is part of the IMI plc group (IMI Process Automation).

Seven Star LLC is an independent supplier in Muscat. We list IMI STI positioners, actuators and switches for valve automation in Oman and the GCC and source them by full model code.

IMI STI company profile

Established 1960, in Gorle (Bergamo), Italy
Manufacturing site Levate (Bergamo), Italy, since 2014. The plant is about 15 km from the original Gorle site.
Group IMI plc, Process Automation division. STI S.r.l. is the legal entity and IMI STI is the brand name.
Product families Quarter-turn Scotch yoke actuators, linear actuators, lift-and-turn actuators, stepper actuators, valve positioners, limit switches, pressure switches and pneumatic accessories
Typical duty Emergency shutdown and isolation valves, anti-surge valves, turbine bypass and steam valves, dampers and process control valves
Industries Oil and gas, power, petrochemicals, process industries, water and metals

Milestones

  • 1960: STI is founded in Gorle, Bergamo.
  • 2002: IMI plc acquires STI, according to the company's own literature.
  • 2014: Manufacturing moves to the new plant in Levate, about 15 km from Gorle.

IMI STI product series

Series Type Key published data
RTC Pneumatic Scotch yoke quarter-turn actuator Up to 12 bar supply, -30 to +100 °C ambient, 90° rotation; single-acting, double-acting or spring-return; air, nitrogen, sweet or sour gas; ISO 5211 mounting; SIL 3, ATEX, PED, IP66/67M
RTQ High-torque pneumatic Scotch yoke actuator For large ball, plug and butterfly valves in harsh environments; canted or symmetrical yoke
RTQD / RTQH Direct-gas and hydraulic Scotch yoke actuators RTQD: gas-over-oil, operating pressure up to 114 bar, -20 to +100 °C; RTQH: hydraulic version for sites with a hydraulic power supply
SC/V, SC Pneumatic linear actuators For globe and gate valves (SC/V) and for dampers (SC); SC/VLT is the lift-and-turn version
SHP Smart high-performance positioner HART 7, self-tuning, Cv up to 2.3, 2.5 to 10.5 bar supply, ATEX and IECEx, IP66 aluminium or stainless steel housing
SHP-SIS Safety positioner IEC 61508:2010 up to SIL 3, built-in partial stroke testing, -55 to +85 °C ambient
FasTrak FT, QuickTrak Smart digital positioners and valve control systems Digital positioning with valve diagnostics
SA/CL Analog positioner Analog positioner for control valve actuators
2130 Limit switch box Position feedback for rotary valve actuators

Scotch yoke actuators give their highest torque at the start and end of the stroke. That is where a ball, plug or butterfly valve needs the most break-out and seating torque, so a Scotch yoke can be smaller than a rack-and-pinion actuator for the same valve. A canted yoke moves the torque peak toward one end of the stroke, for valves whose highest demand is when they close. A symmetrical yoke gives the same curve in both directions.

Where IMI STI products are used

In the GCC, IMI STI actuators and positioners appear mostly on emergency shutdown (ESD) and blowdown valves, compressor anti-surge valves, steam turbine bypass valves and large dampers in oil and gas, refining, petrochemical and power plants. On shutdown valves the SHP-SIS positioner adds partial stroke testing, so the valve can be proven to move without taking the plant down.

Ordering and replacement: what we need

For an actuator, send the full model code from the nameplate, the valve type and size, required torque or thrust with safety factor, supply medium and pressure, fail position (fail-close, fail-open or fail-last), stroke time, mounting flange (ISO 5211) and stem adaptor, ambient temperature range and the hazardous-area certification required. For a positioner, send the model, actuator type, signal (4-20 mA, HART), whether partial stroke testing or a SIL rating is needed, and the cable entry thread. When a series has been superseded, we quote the successor that IMI names in its documentation and point out any differences in mounting or signal.

Facts checked against IMI Process Automation product pages and published company history, October 2026.

FAQ

Questions about the IMI STI FCV-04-S1-00-S-22-U Flow Control Valve 1/4

Answers from our engineering team on installation, compatibility and integration.

01What does the FCV-04-S1-00-S-22-U do?
It is an adjustable restrictor in a pneumatic circuit. Its setting screw limits the air flow and so changes the actuator stroking time.
02What does the U or B suffix mean on an FCV code?
According to the model selection, U is unidirectional control and B is bidirectional control. This code ends in U.
03What is the manufacturer part number for the FCV-04-S1-00-S-22-U?
The instruction manual lists the model FCV-04-S1-00-S-22-U with the part number 114871.
04What pressure range applies?
The technical data list a working pressure of 1 bar minimum to 12 bar maximum, with a design pressure of 12 bar.
05How do I order the FCV-04-S1-00-S-22-U?
Send the part number FCV-04-S1-00-S-22-U with the quantity and any special requirement to Seven Star LLC and we will reply to your RFQ.