Hubbell HBL4100P6W IEC Pin and Sleeve Plug

Overview

The Hubbell HBL4100P6W is a heavy-duty IEC pin and sleeve plug from Hubbell’s Wiring Device-Kellems range, rated 100/125A at 380–415V AC in a 3-pole, 4-wire grounding configuration. Built with a one-piece thermoplastic housing and solid brass pins, it is designed for high-ampacity power connections in demanding industrial, marine, and construction environments where a conventional receptacle would fail under moisture, dust, or repeated mating cycles. The device is certified watertight to IP68/IP69K, allowing safe use in washdown areas and outdoor installations exposed to weather.

Backed by manufacturer datasheet documentation, Seven Star LLC proudly supplies the HBL4100P6W and the wider pin and sleeve range to contractors, marine terminals, and industrial facilities across Oman and the GCC. Every unit sourced through Seven Star LLC is supplied with manufacturer documentation and technical support for projects throughout the Sultanate.

Operating Principle of the Hubbell HBL4100P6W

The Hubbell HBL4100P6W transfers power through solid one-piece brass pins that mate with a corresponding IEC 60309-configuration connector, providing a positive, low-resistance electrical connection rated for full-load current interruption. Unlike standard blade-and-slot plugs, the cylindrical pin-and-sleeve geometry ensures correct polarity and grounding continuity every time the connection is made, even after hundreds of mate/unmate cycles in the field.

A compression gasket seated within the housing forms the IP68/IP69K watertight seal once the plug and connector are fully engaged, keeping moisture and contaminants away from the live contacts. This sealed design allows the device to be used in wash-down food and beverage areas, marine deck power outlets, and outdoor construction sites without a separate weatherproof enclosure, while the 3000V dielectric strength rating provides a wide safety margin against electrical breakdown under transient surges.

Engineering Design of the Hubbell HBL4100P6W

Physically, the HBL4100P6W uses a one-piece rugged thermoplastic housing with a thermoset polyester contact carrier, giving the device high impact resistance and a V-0 flammability rating suitable for demanding industrial floor and dockside environments. The 3-pole, 4-wire grounding configuration accepts cable entry via pressure terminal screws, allowing straightforward field termination without specialized crimping tools.

The connector shell carries a color-coded body (red for the 380–415V rating) consistent with IEC 60309 voltage color coding, helping electricians visually verify voltage compatibility before mating connectors on multi-voltage sites. Rated for a continuous operating temperature range of -40°C to 75°C, the HBL4100P6W tolerates both outdoor GCC summer conditions and cold-storage or refrigerated facility environments without degradation of the sealing gaskets or housing material.

Key Features

The Hubbell HBL4100P6W pin and sleeve plug offers the following features for demanding power connection applications:

• 100/125A current rating at 380–415V AC in a 3-pole, 4-wire grounding configuration.
• IP68/IP69K watertight rating suitable for washdown, marine, and outdoor installations.
• One-piece rugged thermoplastic housing with thermoset polyester contact carrier for high impact resistance.
• Solid one-piece brass pins ensuring reliable, low-resistance electrical contact over repeated cycles.
• 3000V dielectric strength rating providing a wide safety margin against surge conditions.
• Pressure terminal screws for straightforward field wiring without specialized tools.
• UL Listed to UL1682 and certified to IEC 60309-1/60309-2 for international interchangeability.
• Operating temperature range of -40°C to 75°C for reliable performance across GCC climate extremes.

Industrial Applications

The HBL4100P6W is widely used across Oman and the GCC for temporary and semi-permanent power connections at construction sites, marine terminals, and event or exhibition power distribution, where its watertight sealing and rugged pin-and-sleeve design outperform standard industrial plugs exposed to dust, salt spray, and repeated handling. Food and beverage processing facilities also specify pin and sleeve connectors of this type for washdown-area equipment power feeds that must withstand routine high-pressure cleaning.

Working closely with plant engineers in the region, Seven Star LLC distributes the HBL4100P6W to contractors and plant operators working on projects across the Sohar and Salalah economic zones, as well as marine and logistics facilities in Muscat. Facility engineers value the connector’s compatibility with existing IEC 60309 pin and sleeve infrastructure already installed across many regional industrial sites.

Technical Specifications

Key technical specifications for the Hubbell HBL4100P6W pin and sleeve plug are summarized below.

Contractors comparing the Hubbell HBL4100P6W against generic industrial plugs consistently cite its sealed IP68/IP69K rating and brass-pin reliability as the deciding factor for sites where connectors are mated and unmated daily under harsh outdoor or washdown conditions.

Request a Quote for Hubbell HBL4100P6W IEC Pin and Sleeve Plug

To request a formal quotation for the Hubbell HBL4100P6W pin and sleeve plug, contact Seven Star LLC’s instrumentation and electrical division for current availability and lead time across Oman and the GCC. Technical datasheets are available on request for specification review. With fast quotation turnaround and technical support, Seven Star LLC supplies pin and sleeve connectors on request, with lead time confirmed at quotation and dedicated technical support for contractors and facility engineers throughout the Sultanate.

Browse the full Hubbell range or see more Electrical & Power Modules products supplied by Seven Star LLC in Oman and the GCC.