Brand:

Swagelok SS-1RS8 Integral Bonnet Needle Valve, 1/2 in. Tube, 0.73 Cv

Description

SS-1RS8 in brief

Swagelok SS-1RS8 is the 1/2 in. member of the 1 series regulating needle valves. A forged 316 stainless integral-bonnet body carries 1/2 in. Swagelok tube fitting ends, a straight flow path, a 0.250 in. orifice and a maximum Cv of 0.73. The stem is a regulating type with a 316 stainless tip, the handle is a phenolic knob, and the room-temperature rating is 5000 psig (344 bar).

Many plants prefer the half-inch size when tubing is heavy-wall or when the valve will be tied to larger impulse headers, yet the valve still needs fine adjustment capability. That is where SS-1RS8 sits between the 1/4 in. SS-1RS4 and the bar-handled SS-18RS8.

Packing and sealing

The valve uses the series live-loaded chevron packing with disc springs. The catalog attributes four benefits to it: better sealing, reduced friction wear, compensation for packing wear and lower operating torque. A packing nut accessible from outside allows adjustments with the valve inline. The packing choice also limits temperature: standard packing is good for the 450 degrees F listed, UHMWPE is limited to 250 degrees F, and PEEK extends to 600 degrees F in other configurations.

The 0.250 in. orifice and 0.73 Cv keep SS-1RS8 from becoming a bottleneck on half-inch tubing, while the regulating stem, as the catalog describes for the O, 1 and 18 series, is aimed at setting flow rather than simple on-off isolation. Operators can therefore hold a flow setpoint on sample or purge lines with the knob.

The tube, not the valve, often limits the pressure in the system. Heavy-wall tubing in the 1/2 in. size has a published working pressure in the manufacturer tubing data catalog, so verify that before pressurising to the full valve rating of 5000 psig.

Keep the valve clamped to a rigid panel or support in vibrating service, as stem vibration can wear the packing prematurely. Record the as-found knob position at commissioning so that a technician can restore the flow setting after maintenance. For quotation purposes, include the full string SS-1RS8, since a one-character difference such as the final digit changes the tube size and a letter change alters the stem or end connection.

Process safety reviewers often ask what happens when the valve is closed against a trapped liquid. Needle valves can trap fluid between the seat and a closed downstream device, so thermal expansion can raise the trapped pressure above the rating. On heated or sun-exposed lines in the Gulf climate, add a relief path or leave a vent so that the 5000 psig figure for SS-1RS8 is never exceeded by thermal pressure rise.

Commissioning technicians should record the packing nut torque after the first thermal cycle and again after a month of service, because live-loaded packing stabilises most of its load in that period. Where the valve is used on hydrocarbon service, check against the plant fugitive-emissions procedure, and keep the API 624 option in mind when the specification demands it.

SS-1RS8 specification table

Part number SS-1RS8
Series 1 series integral-bonnet
Body 316 stainless steel
Ends 1/2 in. Swagelok tube fitting x 2
Flow pattern Straight, 2-way
Stem Regulating, 316 stainless tip
Orifice 0.250 in.
Max Cv 0.73
Rating at 100 F 5000 psig (344 bar)
Rating at 450 F 3435 psig (236 bar)
Temperature range Minus 65 to 450 F
Handle Phenolic knob
Cleaning SC-10
Low emissions Certified

Choosing between SS-1RS8 and its neighbours

The 1/4 in. SS-1RS4 and vee-stem SS-1VS4 pass 0.37 Cv through a 0.172 in. orifice, so SS-1RS8 offers about double the capacity. SS-1RF4 provides the same 0.73 Cv and 0.250 in. orifice but with female NPT ends, so it suits threaded piping, whereas SS-1RS8 suits tubing. SS-18RS8 raises the capacity to 1.8 Cv with a 0.375 in. orifice and a bar handle. Choose SS-1RS8 when flow demand lies between a quarter and three-quarters of a Cv.

Oman and GCC uses

Typical installations are gas-conditioning skids, sample coolers, glycol and amine instrument lines, boiler-feedwater sampling panels and compressor seal-gas panels, where a half-inch tube needle valve is the right balance between flow and size.

Installation steps

Support the valve body by the wrench flats while pulling up the tube fittings. Mount the valve in panel with the bonnet nut if needed. Pressurise slowly, test for leaks at the fittings and the packing nut, and open the stem to the working position.

Service life

Because stem torque is reduced by the live-loaded packing, the valve resists wear. Scheduled checks should include looking for weeping around the packing nut and verifying the knob is tight.

Ordering

Quote SS-1RS8 with the quantity. If you need a different handle, panel mounting or API 624 documentation, say so with the request.

Quick answers about SS-1RS8

What size connections does Swagelok SS-1RS8 have? Both ports are 1/2 in. Swagelok tube fitting ends on a 316 stainless steel body.

What are the orifice and Cv for SS-1RS8? The orifice is 0.250 in. and the maximum Cv is 0.73, about double the 0.37 of the 1/4 in. SS-1RS4.

What pressure rating does SS-1RS8 have at high temperature? It is rated 5000 psig at 100 degrees F and 3435 psig (236 bar) at 450 degrees F, the maximum listed temperature of 232 degrees C.

Which stem tip does SS-1RS8 use? A regulating stem with a 316 stainless steel stem tip, intended for flow adjustment.

Is the handle on SS-1RS8 a bar or knob? It uses a phenolic knob; the larger SS-18RS8 uses an aluminum bar handle.

Documents and quotation

The attached datasheet is the manufacturer integral-bonnet needle valve catalog. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Send your RFQ with SS-1RS8 and the quantity needed.

Other Models in the Swagelok 1 Needle Range

Seven Star LLC supplies models from the Swagelok 1 Needle range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Swagelok SS-18RS8 18 Series Needle Valve, 1/2 in. Tube, 1.8 CvInstrument Valves & FittingsView details
Swagelok SS-1VS4 Integral Bonnet Needle Valve, Vee Stem, 1/4 in. TubeInstrument Valves & FittingsView details
Swagelok SS-1RS8 Integral Bonnet Needle Valve, 1/2 in. Tube, 0.73 CvInstrument Valves & FittingsYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Swagelok SS-1RS8 Integral Bonnet Needle Valve, 1/2 in. Tube, 0.73 Cv Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Swagelok is the American maker of tube fittings and small-bore valves, best known for its two-ferrule compression tube fitting. Fred A. Lennon and Cullen B. Crawford founded it in Cleveland, Ohio, in July 1947 as Crawford Fitting Company to make that fitting. Lennon bought the whole business and the patent in 1948, and the company has been based in Solon, Ohio, since the mid-1960s.

Seven Star LLC is an independent supplier in Muscat. We list Swagelok tube fittings, needle, ball, check, relief and metering valves, filters, regulators and sample cylinders, and supply them for instrument tubing and analyser systems in Oman and the GCC by exact part number.

Swagelok company profile

Established July 1947, Cleveland, Ohio, as Crawford Fitting Company
Founders Fred A. Lennon and Cullen B. Crawford; Lennon bought out Crawford in 1948
Headquarters Solon, Ohio, since the mid-1960s
Product families Tube fittings and adapters, face seal fittings, needle, ball, plug, check, relief and diaphragm valves, filters, regulators, quick-connects, sample cylinders and hoses

Milestones

  • 1947: Fred A. Lennon and Cullen B. Crawford found Crawford Fitting Company in Cleveland in July.
  • 1948: Lennon buys out Crawford.
  • Mid-1960s: Headquarters move to Solon, Ohio.

Swagelok products we list

Family Models Typical use
Tube fittings Overview, SS-810-6 union, SS-810-3 tee, SS-810-9 elbow, SS-810-4 cross, SS-810-1-8 male connector, SS-810-7-8 female connector, SS-810-61 bulkhead, SS-12M0-6 metric union, VCR face seal Leak-tight connections on instrument and process tubing
Needle and metering valves SS-1RS4, SS-1RF4, SS-18RF6, SS-6NBS6, SS-20VS4, SS-4MG Isolation and fine flow adjustment on instrument lines and sample systems
Ball and plug valves 40G, 40GX 3-way, 60 Series, 83 Series, P4T plug Quick quarter-turn shut-off and switching
Check, relief and sealed valves SS-4C-1, CH, R3A, RL3, SS-4BK bellows, SS-DLS4 diaphragm Backflow prevention, overpressure relief and leak-free sealing for toxic or high-purity media
Filters, regulators, sampling SS-4F-2, SS-4TF-7, KPR regulator, sample cylinders, QC quick-connects Analyser sample conditioning and gas or liquid sampling

A Swagelok part number can be read directly. In SS-810-6, "SS" is 316 stainless steel, "810" means a 1/2 in. tube fitting (8 sixteenths of an inch, 10 series), and "-6" is a union. A suffix such as "-8" adds a 1/2 in. NPT end, and "M0" marks metric tube, as in SS-12M0-6 for 12 mm. Tube fittings must be made up the same way every time: finger-tight, then 1 1/4 turns for most sizes. A gap inspection gauge confirms the fitting has been pulled up.

Where Swagelok products are used

In Oman and the GCC, Swagelok fittings and valves are used on instrument impulse lines, analyser sample systems, hydraulic and pneumatic control tubing, chemical injection and gas sampling in oil and gas, refining, petrochemical, power and laboratory installations.

Ordering Swagelok products: what we need

Send the full Swagelok part number (for example SS-810-6 or SS-1RS4), the material, and the tube size in inches or millimetres. For valves, add the end connections and any options. For sample cylinders, add the volume, pressure rating and end configuration.

Facts checked against Swagelok company history, October 2026.

FAQ

Questions about the Swagelok SS-1RS8 Integral Bonnet Needle Valve, 1/2

Answers from our engineering team on installation, compatibility and integration.

01What size connections does Swagelok SS-1RS8 have?
Both ports are 1/2 in. Swagelok tube fitting ends on a 316 stainless steel body.
02What are the orifice and Cv for SS-1RS8?
The orifice is 0.250 in. and the maximum Cv is 0.73, about double the 0.37 of the 1/4 in. SS-1RS4.
03What pressure rating does SS-1RS8 have at high temperature?
It is rated 5000 psig at 100 degrees F and 3435 psig (236 bar) at 450 degrees F, the maximum listed temperature of 232 degrees C.
04Which stem tip does SS-1RS8 use?
A regulating stem with a 316 stainless steel stem tip, intended for flow adjustment.
05Is the handle on SS-1RS8 a bar or knob?
It uses a phenolic knob; the larger SS-18RS8 uses an aluminum bar handle.