- Automation & ControlView all 2,895 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Rotork
Rotork CVQ-1200 Quarter-Turn Electric Control Actuator
Description
Rotork CVQ-1200 is the smaller of the two quarter-turn actuators in the CVA precision-modulating family. Where CVL models push a stem, the CVQ-1200 turns a shaft: it delivers 1,200 lbf.in (135.5 Nm) of rated torque through a nominal 90 degree stroke in 15 seconds, and it is designed for rotary control valves such as segmented ball, eccentric plug and high-performance butterfly designs that modulate rather than simply open and close.
Key figures for the Rotork CVQ-1200
| Rated torque | 1,200 lbf.in / 135.5 Nm |
|---|---|
| Minimum settable torque | 480 lbf.in / 54.2 Nm (40 percent) |
| Operating time | 15 s at 100 percent speed, plus or minus 10 percent |
| Nominal travel | 90 degrees, stop bolts adjust about plus or minus 5 degrees |
| Weight | Approximately 18 kg (40 lb) |
| Valve base | ISO 5211 F07 / MSS SP-101 FA07, 4 x M8 x 1.25 x 20 mm on a 70 mm PCD, 90 mm spigot |
| Base fixing torque | M8: 12.6 Nm (9.3 lbf.ft); 5/16 UNC: 12.8 Nm (9.4 lbf.ft) |
| Reserve powerpack charge time | 100 s |
| Design life | 16 million 1 percent strokes at 75 percent load; 8 million 10 percent strokes at 100 percent load |
| Supply | 100 to 240 VAC 50/60 Hz or 24 VDC |
| Ingress protection | IP66 / IP68 (7 m, 72 h), Type 4 and 6 |
Why the CVQ-1200 suits modulating rotary valves
Ordinary on-off quarter-turn actuators are not meant to make a thousand adjustments a day. The CVQ-1200 combines a brushless DC motor with a low-inertia spur geartrain and two 12-bit magnetic encoders, and the datasheet rates it for 16 million small strokes at 75 percent load. Its anti-back-drive design resists reverse torque from the valve up to 125 percent of rated, so a butterfly valve that wants to swing under flow will not walk away from the setpoint, and a solenoid-lock option stretches that to 300 percent.
Running costs: CVQ-1200 power figures
At 240 VAC the CVQ-1200 uses 5.1 W (0.07 A) idle, 15.6 W (0.13 A) running with no load, 25.8 W (0.20 A) at half load and 31.8 W (0.24 A) at full load. The capacitor charging peak is 44 W (0.33 A) and the continuous 0.5 Hz modulation test averages 26 W (0.20 A). On 220/230 V the full-load figure is 31.2 W (0.22 A). The brochure explains that the low figure while modulating arises because energy from the decelerating motor is returned and stored for the next reversal.
How CVQ-1200 differs from other CVA variants
Compared with the CVQ-2400 the CVQ-1200 has half the torque (135.5 Nm against 271 Nm), a quicker 15 s travel instead of 20 s, a 6 kg lighter body (18 against 24 kg), a smaller F07 base rather than F10, and a 100 s rather than 200 s capacitor charge. It shares the F07 pattern and M8 bolting with the CVL-500 to CVL-1500 linear units, which simplifies spares. The linear models produce thrust in newtons, not torque, and so are not interchangeable.
Fitting CVQ-1200 to a rotary valve
Order the blank drive bush and have it machined to suit the valve stem; the manual shows that the bush can be fitted in four positions 90 degrees apart, which allows the actuator body to face whichever way the pipework allows. Mount it on the ISO 5211 flange with class 8.8 fixings (Delta GZ coated or Grade A4 stainless steel fixings are recommended), connect power, and use Enlight over Bluetooth to run the align-coupling routine; the manual then has you set the two stop bolts under the body, which are factory set for a nominal 90 degree travel. After any stop-bolt adjustment, the actuator limits must be reset. Open and Close label kits and cut-outs for local indication are supplied on units built after July 2013.
Control options and diagnostics of CVQ-1200
Standard 4 to 20 mA command and feedback, a configurable availability contact, and a magnetic Run, Stop, Test selector with a tri-colour LED. The Test mode measures deadtime, T86 step response, settling time, average torque each way, full stroke speed and valve friction and reports pass or fail with a flashing LED. Optional HART, Foundation Fieldbus, Profibus, Modbus and Pakscan network cards add 10 to 30 mA at 24 VDC. TIIS certificates exist for the CVQ-1200 on both 24 VDC and 100 to 240 VAC.
Typical uses and upkeep of CVQ-1200
In GCC process plants expect it on butterfly valves in cooling-water and seawater circuits, rotary control valves for lube-oil temperature, ball valves on gas-turbine fuel trim and desalination chemical dosing. The gear train is life-lubricated, the motor has no brushes, and the enclosure is hermetically sealed, so regular tasks are limited to checking gland and bung seals. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Environment and limits for the CVQ-1200: ambient operation from -30 to +60 C as standard (-40 to +60 C with the low-temperature option), IP66/IP68 to 7 m for 72 hours, plant vibration up to 1 g RMS between 10 and 1,000 Hz, shock to 5 g peak, and under 61 dB(A) of noise at 1 m. The supply can be 100 to 240 VAC (up to 2 A) or 24 VDC (up to 7 A), and for an AC unit the internal switch-mode supply converts to 24 VDC for the electronics and motor. Cable sizing should keep the voltage drop below 10 percent of the nominal supply at rated load, and fuses should be chosen to protect the power cable, since the actuator carries its own load and temperature protection.
Documents and quotation
The CVA brochure with the CVQ-1200 torque and timing tables is provided as the datasheet. Send the RFQ with CVQ-1200, quantity, supply, shaft size and any fieldbus or hazardous-area requirement.
Installation and Commissioning Planning
Planning ahead shortens downtime when a Rotork CVQ-1200 goes into service. Confirm the available mounting space, cable entry or process connection, and the tools and spare seals needed on the day. Keep the existing configuration or calibration data so the new unit can be set up to match, and check that loop drawings and the asset register are updated after the swap. If the installation has to fit a short shutdown window, tell us the date when you request a quotation so that delivery of the Rotork equipment can be planned around it.
Other Models in the Rotork Cva Range
Seven Star LLC supplies models from the Rotork Cva range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Rotork CVQ-1200 Quarter-Turn Electric Control Actuator | Electric Actuators | You are viewing this model |
| Rotork CVL-1500 Electric Linear Actuator 6,672 N | Electric Actuators | View details |
| Rotork CVL-5000 Heavy-Duty Electric Linear Actuator | Electric Actuators | View details |
| Rotork CVQ-2400 Quarter-Turn Electric Actuator 271 Nm | Electric Actuators | View details |
| Rotork CVL-1000 Linear Electric Actuator 4,448 N | Electric Actuators | View details |
| Rotork CVL-500 Linear Electric Control Valve Actuator | Electric Actuators | View details |
Datasheets & Documents
- Datasheet Rotork CVQ-1200 Quarter-Turn Electric Control Actuator Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Rotork is a British flow control company best known for electric valve actuators. Jeremy Fry founded Rotork Engineering Company in Bath in 1957, the year its first actuator, the 100A, went on sale, and the group is still headquartered in Bath and listed on the London Stock Exchange. Today Rotork makes electric, pneumatic, hydraulic and electro-hydraulic actuators, gearboxes, precision regulators and valve positioners.
Seven Star LLC is an independent supplier listing Rotork actuators, Rotork Fairchild regulators, YTC positioners and spare parts for buyers in Oman and the GCC. Replacement units are matched from the actuator nameplate and wiring diagram number.
Rotork company profile
| Origin | Founded by Jeremy Fry in 1957 in Bath, England; first product the 100A valve actuator |
|---|---|
| Headquarters | Brassmill Lane, Bath, United Kingdom |
| Ownership | Rotork plc, a public company listed on the London Stock Exchange |
| Acquired brands | Fairchild precision pneumatic controls (2011, Winston-Salem, USA), YTC valve positioners (Young Tech Co., Seoul, 2014), Mastergear gearboxes (2016) |
| Product families | Intelligent electric actuators, control valve actuators, electro-hydraulic and fluid power actuators, gearboxes, precision regulators, positioners and network control systems |
Milestones
- 1957: Jeremy Fry founds Rotork in Bath, England; the first product is the 100A valve actuator.
- 2011: Fairchild precision pneumatic controls (Winston-Salem, USA) is acquired.
- 2014: YTC valve positioners (Young Tech Co., Seoul) is acquired.
- 2016: Mastergear gearboxes is acquired.
Rotork actuators, regulators and positioners
| Series | Type | Typical use |
|---|---|---|
| IQ3 | Intelligent multi-turn electric actuator | Gate and globe valves, penstocks and sluice gates; non-intrusive setup with a Bluetooth setting tool, double-sealed enclosure, data logging |
| IQT3 | Intelligent part-turn electric actuator | Ball, butterfly and plug valves and dampers, with the same setup and diagnostics as IQ3 |
| CVA | Precision control valve electric actuator | Continuous modulating control of linear and part-turn control valves where instrument air is not available |
| CMA | Compact modulating electric actuator | Small control valves, chemical injection and metering pumps |
| Skilmatic SI3 | Self-contained electro-hydraulic actuator | Spring-return fail-safe and ESD duty with partial stroke testing, needing only an electrical supply |
| GP / GH | Scotch yoke pneumatic (GP) and hydraulic (GH) actuators | Large quarter-turn valves on pipelines and ESD service; spring-return or double-acting |
| CP | Compact pneumatic quarter-turn actuator | Smaller on-off ball and butterfly valves on plant air |
| Fairchild 10, 30, 55, 66, M11, 81 | Precision pressure regulators | Instrument air to positioners and actuators, test benches; Model 66 in stainless steel for corrosive and offshore sites |
| Fairchild 1000 | No-bleed precision regulator | Saves instrument air or gas where continuous bleed is not acceptable |
| Fairchild 10BP, 4000ABP | Back pressure regulators | Holding upstream pressure in process and test systems |
| YTC YT-1000, YT-3300 | Valve positioners | Electro-pneumatic (YT-1000) and smart HART (YT-3300) positioning of linear and rotary pneumatic actuators |
Where Rotork equipment is used
Rotork actuators are common on oil and gas pipelines and terminals, refineries and gas plants, water and wastewater networks, desalination plants and power stations. Electric IQ actuators handle isolation valves on long pipelines and water mains, often networked over Rotork Pakscan, Modbus or another fieldbus. Skilmatic and scotch yoke actuators cover emergency shutdown valves, and Fairchild regulators and YTC positioners sit on pneumatic control valves throughout process plants.
Ordering Rotork actuators and spare parts: what we need
Send photos of the actuator nameplate with the model, serial number and wiring diagram number; the wiring diagram is usually inside the terminal cover. Rotork can identify the original build, including options and control interface, from the serial number. For a new application add the valve type and size, required torque or thrust, operating time, mounting flange (ISO 5210 or ISO 5211), power supply, control signal or network protocol, fail-safe requirement and hazardous-area marking. For regulators and positioners send the full model code and the pressure or signal ranges.
Facts checked against Rotork plc company information and product data, October 2026.
Browse Rotork products by category: Valve Actuator, Regulators, Valve Positioner.
FAQ
Questions about the Rotork CVQ-1200 Quarter-Turn Electric Control
Answers from our engineering team on installation, compatibility and integration.
01What torque does the Rotork CVQ-1200 give?
Rated torque is 1,200 lbf.in (135.5 Nm), adjustable down to 40 percent of that (480 lbf.in or 54.2 Nm), over a nominal 90 degree travel completed in 15 seconds.
02Which valve flange fits the CVQ-1200?
The base follows ISO 5211 F07 and MSS SP-101 FA07, with four M8 holes on a 70 mm PCD and a 90 mm spigot, matching many small ball and butterfly valves.
03Is the CVQ-1200 suitable for continuous modulation?
Yes. The brushless DC motor is rated for unrestricted S9 modulation duty and the design life is 16 million 1 percent strokes at 75 percent load.
04How is the CVQ-1200 set up on site?
Through Rotork Enlight software over a wireless Bluetooth link, with no covers removed; the align-coupling routine and the stop bolts below the body set travel.
05Can the CVQ-1200 fail to position on power loss?
An optional reserve powerpack of super capacitors, charged in 100 seconds, can drive the actuator to a preset position, and an optional solenoid lock holds position against 300 percent back-drive.


















Reviews
There are no reviews yet.