CS Instruments VA 500 Thermal Mass Flow Meter for Compressed Air

Description

Overview

The CS Instruments VA 500 is an insertion-type thermal mass flow meter for compressed air and technical gases, designed to be installed in existing pipelines from 1/2″ up to DN 1000. It measures standard volumetric flow and totalised consumption directly, with an integrated display, a temperature measurement as standard and an optional built-in pressure sensor. Compressed air is often the most expensive utility in an industrial plant, and the CS Instruments VA 500 gives energy managers and maintenance teams a simple way to see how much air or gas each line, building or production unit actually uses, to find leaks, and to verify compressor performance.

Seven Star LLC supplies the CS Instruments VA 500 to manufacturing plants, utilities and process industries across the Sultanate of Oman and the GCC. As a trusted supplier with engineering support in Muscat, we help customers select the right measuring range, probe length, gas calibration and output option so that the meter fits the pipe size and the plant control system the first time.

Measurement Principle of the CS Instruments VA 500

The CS Instruments VA 500 uses the calorimetric thermal mass flow principle. A heated sensor element at the probe tip is kept at a defined temperature difference above a reference element that measures the gas temperature. As gas flows past, it carries heat away from the heated element; the energy needed to maintain the temperature difference is a direct function of the mass flow velocity. Because the measurement responds to mass rather than actual volume, no separate pressure and temperature compensation is required, and the instrument outputs flow in standard units referenced to 1000 mbar and 20 °C for compressed air, or 1013 mbar and 0 °C for gases, with the reference conditions adjustable via the keypad.

Using the pipe inner diameter entered on the keypad, the CS Instruments VA 500 converts flow velocity into volume flow in m³/h, m³/min, l/min, l/s or cfm, or mass flow in kg/h and related units, and totalises consumption in m³. The probe has no moving parts, causes negligible pressure loss and is not affected by wear. Standard accuracy is ±1.5 % of measured value ±0.3 % of full scale, with a precision class of ±1 % of measured value ±0.3 % of full scale available on request.

Engineering Design of the CS Instruments VA 500

The probe of the CS Instruments VA 500 is a 10 mm diameter stainless steel 1.4301 tube available in lengths of 120, 160, 220, 300, 400, 500, 600 and 700 mm, mounted through a 1/2″ thread (G, NPT or PT). It is installed through a standard 1/2″ ball valve, so the meter can be fitted and removed under pressure without shutting down the line; a safety ring prevents uncontrolled ejection of the probe, and an engraved depth scale positions the sensor in the pipe centre. Where no ball valve exists, a measuring point can be created by welding on a 1/2″ screw neck or by using a hot tapping clamp and pressure-tight drilling device. The sensor can be removed during operation for cleaning.

The polycarbonate housing, 65 mm in diameter and rated IP65, can be rotated for any mounting position. Power is 18 to 36 VDC at 5 W. As standard the meter provides an RS 485 interface with Modbus RTU, a 4 to 20 mA analogue output for flow, and an electrically isolated pulse output for consumption that can alternatively be used as an alarm. Options include Ethernet with Modbus TCP, Ethernet with Power over Ethernet, M-Bus and IO-Link. A bi-directional version shows flow direction in the display and keeps a separate meter reading for each direction.

Key Features

Highlights of the CS Instruments VA 500 for compressed air and gas metering include:

  • Thermal mass flow measurement with no moving parts and no need for pressure or temperature compensation.
  • Suitable for pipes from 1/2″ to DN 1000 with probe lengths from 120 mm to 700 mm.
  • Installation and removal under pressure through a 1/2″ ball valve, protected by a safety ring.
  • Integrated display showing flow and total consumption, with settings adjustable by keypad.
  • Measuring range versions of 50, 92.7, 185 and 224 m/s to suit low-flow and high-velocity lines.
  • Real gas adjustment available for nitrogen, argon, CO2, oxygen, nitrous oxide, natural gas, helium, propane and methane.
  • Operating pressure from −1 to 50 bar and sensor tube temperature from −30 to 110 °C.
  • Modbus RTU and 4 to 20 mA as standard, with Ethernet, PoE, M-Bus and IO-Link options.

Industrial Applications

The most common use of the CS Instruments VA 500 is compressed air consumption measurement: metering the output of each compressor or compressor station, allocating air costs to production halls, and quantifying leakage during non-production hours. Plants pursuing energy audits or ISO 50001 certification use the CS Instruments VA 500 to establish baselines and verify savings after leak repair or compressor upgrades. With the appropriate gas setting it also measures nitrogen blanketing and purging flows, CO2 in food and beverage plants, oxygen and argon in fabrication shops and hospitals, and natural gas feeds to burners and boilers, where oil- and grease-free or silicone-free cleaning options are available.

In Oman, applications for the CS Instruments VA 500 range from bottling and food plants and pharmaceutical facilities around Muscat to steel, aluminium and fabrication industries in Sohar, packaging and cement producers, and utility and process plants in Duqm and Salalah. Seven Star LLC supports these users as a trusted supplier with engineering support in Muscat. For dryer performance checks, the meter pairs well with the CS Instruments FA 510/515 dew point sensor.

Technical Specifications

The specifications below for the CS Instruments VA 500 are taken from the manufacturer datasheet:

Parameter Specification
Model CS Instruments VA 500 (order code 0695 5001)
Sensor Thermal mass flow sensor, insertion type
Media Compressed air and gases, e.g. N2, Ar, He, CO2, O2, N2O, natural gas, propane, methane, vacuum
Pipe sizes 1/2″ to DN 1000
Measuring range versions Low-speed 50 m/s; standard 92.7 m/s; max 185 m/s; high-speed 224 m/s
Accuracy ±1.5 % of m.v. ±0.3 % f.s.; on request ±1 % of m.v. ±0.3 % f.s.
Units m³/h, m³/min, l/min, l/s, ft/min, cfm, m/s, kg/h, kg/min, g/s, lb/min, lb/h
Operating pressure −1 to 50 bar (high-pressure protection above 10 bar)
Operating temperature Sensor tube −30 to 110 °C; with pressure sensor −20 to 85 °C; housing −20 to 70 °C
Outputs RS 485 Modbus RTU; 4–20 mA; isolated pulse; options Ethernet, PoE, M-Bus, IO-Link
Optional pressure sensor 0 to 16 bar(g), or 10 to 2000 mbar(abs) for vacuum
Supply 18 to 36 VDC, 5 W
Probe Stainless steel 1.4301, Ø 10 mm, lengths 120 to 700 mm; G 1/2″, 1/2″ NPT or PT 1/2″ thread
Housing Polycarbonate, IP65, Ø 65 mm, any mounting position

Alternative thermal technologies on our catalogue include the ABB Sensyflow FMT200-ECO2 and the Sierra QuadraTherm 640i insertion meter.

How to Order

For a quotation on the CS Instruments VA 500, send your RFQ to the Seven Star LLC instrumentation division with pipe size, gas type, maximum flow, pressure and the required output. Our engineers will build the full order code, confirm availability and lead time, and share the technical datasheet for download. Seven Star LLC supplies CS Instruments compressed air measurement equipment to customers throughout Oman and the GCC, with engineering support in Muscat.

Datasheets & Documents
  • PDF Datasheet CS Instruments VA 500 Flow Meter Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

CS Instruments is a German manufacturer of measurement instruments for compressed air and gases, founded in 2002 by Christian Schuldt and Wolfgang Blessing and based in Harrislee, near Flensburg, with a second site in Tannheim. The company grew from one person to about 120 people worldwide by 2022. It makes dew point sensors, flow meters, leak detectors and data loggers for compressed air audits.

Seven Star LLC lists CS Instruments flow meters and dew point sensors and supplies them to compressor rooms, plant utilities teams and gas users in Oman.

CS Instruments company profile

Founded 2002, Germany
Founders Christian Schuldt and Wolfgang Blessing
Headquarters Harrislee, Germany; second site in Tannheim
Staff About 120 worldwide (2022)
Product families VA 500 and VA 550 thermal mass flow meters, FA 510, FA 515 and FA 550 dew point sensors, LD 500 and LeakCam ultrasonic leak detectors, DS 500 chart recorders, particle counters

Milestones

  • 2002: CS Instruments is founded.
  • 2022: CS Instruments marks 20 years.

CS Instruments products listed here

The VA 500 is a thermal mass flow meter for compressed air and gases. It reads consumption directly as mass flow or standard volume flow. The FA 510/515 is a dew point sensor for compressed air and gases, used after refrigeration, adsorption and membrane dryers. The manufacturer's program also covers leak detection, energy management and compressed air quality measurement, which we can quote on request.

CS Instruments products we list

Family Examples
Gas Analyzer Accessories FA 510/515, FA 550 Dew Point Sensor in Aluminium Hou…
Portable Test & Measurement LD 500 Ultrasonic Leak Detector with Cam…, LeakCam 600 Ultrasonic Leak Detection Ca…
Controllers & Data Acquisition DS 500 Intelligent Chart Recorder
Flowmeters VA 500 Thermal Mass Flow Meter for Compr…

Ordering CS Instruments devices: what we need

For a CS Instruments flow meter, send the pipe inner diameter, line pressure, gas type and expected flow. For a dew point sensor, state the dryer type and the dew point range you need to measure. In both cases tell us the output you want to wire to and send the existing order code if the item is a replacement. We serve buyers across the GCC.

Facts checked against CS Instruments' company profile and trade directory listings, October 2026.

FAQ

Questions about the CS Instruments VA 500 Thermal Mass Flow Meter for

Answers from our engineering team on installation, compatibility and integration.

01What does the CS Instruments VA 500 measure?
The CS Instruments VA 500 measures standard volume flow, mass flow and total consumption of compressed air and gases using the thermal mass flow principle. It also measures gas temperature as standard and can include an integrated pressure sensor as an option.
02Can the VA 500 be installed without shutting down the compressed air line?
Yes. The probe is inserted through a standard 1/2 inch ball valve and can be fitted or removed under pressure. A safety ring prevents uncontrolled ejection, and an engraved depth scale helps place the sensor in the pipe centre.
03Which pipe sizes and gases are supported?
The meter suits pipes from 1/2 inch to DN 1000 with probe lengths from 120 to 700 mm. Besides compressed air, real gas adjustments are available for nitrogen, argon, CO2, oxygen, nitrous oxide, natural gas, helium, propane and methane.
04How does the VA 500 connect to a PLC or energy monitoring system?
RS 485 Modbus RTU, a 4 to 20 mA analogue output and an isolated pulse output are standard. Ethernet Modbus TCP, Power over Ethernet, M-Bus and IO-Link are available as options, and the meter works with CS Instruments data loggers.
05Does Seven Star LLC supply the CS Instruments VA 500 in Oman?
Yes. Seven Star LLC supplies the CS Instruments VA 500 and its installation accessories to customers in Oman and across the GCC. As a trusted supplier we offer engineering support in Muscat and help define the correct order code.