Brand:

ifm SD6600 Industrial Gas Counter, R 1/2 DN15, IO-Link

Description

Why the ifm SD6600 is a gas counter, not just an air meter

The ifm SD6600 is listed by the manufacturer as an industrial gas counter, which tells you what separates it from the plain compressed air variants: the datasheet names argon, carbon dioxide and nitrogen alongside compressed air as media. The order description is SDR12DGXFRKG/US-100. In a DN15 tube with an R 1/2 external thread it covers 4 to 1250 l/min, shown on a 1.44 inch colour display with 128 by 128 pixels, so a technician can read flow, pressure and temperature without a laptop.

Highlights

  • Counts gas consumption of argon, carbon dioxide and nitrogen as well as compressed air, which suits welding and laser cutting gas lines.
  • Pressure monitoring covers minus 1 to 16 bar with 0.05 bar resolution.
  • Repeatability is plus/minus 0.4 percent of reading plus 0.1 percent of full scale.
  • Temperature accuracy is plus/minus 0.5 K in the stated conditions.
  • IO-Link revision 1.1 at 38.4 kBaud, with a minimum process cycle time of 7.2 ms.

SD6600 data sheet values

Product type Industrial gas counter with flow, pressure and temperature monitoring
Process connection R 1/2 external thread, DN15
Measuring range 4 to 1250 l/min, 0.3 to 99.8 m/s, 0.25 to 75 m3/h
Display range 0 to 1500 l/min, 0 to 90 m3/h
Media Argon, carbon dioxide, nitrogen, compressed air
Medium temperature minus 10 to 60 degC
Pressure rating / burst 16 bar / minimum burst 64 bar
MAWP (CRN applications) 9.7 bar
Operating voltage 18 to 30 V DC (SELV/PELV), under 80 mA
Outputs 2 digital PNP/NPN, 1 analogue 4 to 20 mA (load up to 500 ohm), pulse output, IO-Link; counter reset input
Repeatability plus/minus (0.4 percent MW + 0.1 percent MEW)
Temperature accuracy plus/minus 0.5 K
Response time under 0.1 s (T09, damping 0)
Display Colour, 1.44 inch, 128 x 128 pixels
Housing PBT+PC-GF30, PPS GF40, stainless steel; 300 x 45.4 x 71.2 mm
Weight / protection 730 g, IP 65 and IP 67
IO-Link Revision 1.1, COM2 38.4 kBaud, minimum cycle time 7.2 ms

Read as running text, the manufacturer datasheet of the SD6600 states the following. Product type: Industrial gas counter with flow, pressure and temperature monitoring. Process connection: R 1/2 external thread, DN15. Measuring range: 4 to 1250 l/min, 0.3 to 99.8 m/s, 0.25 to 75 m3/h. Display range: 0 to 1500 l/min, 0 to 90 m3/h. Media: Argon, carbon dioxide, nitrogen, compressed air. Medium temperature: minus 10 to 60 degC. Pressure rating / burst: 16 bar / minimum burst 64 bar. MAWP (CRN applications): 9.7 bar. Operating voltage: 18 to 30 V DC (SELV/PELV), under 80 mA. Outputs: 2 digital PNP/NPN, 1 analogue 4 to 20 mA (load up to 500 ohm), pulse output, IO-Link; counter reset input. Repeatability: plus/minus (0.4 percent MW + 0.1 percent MEW). Temperature accuracy: plus/minus 0.5 K. Response time: under 0.1 s (T09, damping 0). Display: Colour, 1.44 inch, 128 x 128 pixels. Housing: PBT+PC-GF30, PPS GF40, stainless steel; 300 x 45.4 x 71.2 mm. Weight / protection: 730 g, IP 65 and IP 67. IO-Link: Revision 1.1, COM2 38.4 kBaud, minimum cycle time 7.2 ms.

Applications of SD6600 in welding and fabrication

Fabrication shops serving oil and gas projects in Oman buy shielding gases by the bottle bank or bulk tank, and losses through hoses, torches and regulators are hard to see. A SD6600 on the shielding-gas branch lets quality teams link gas consumption to weld hours, find forgotten flowing torches overnight and reconcile deliveries. Other uses include nitrogen blanketing lines in small process units and carbon dioxide dosing in water treatment, where the 0.3 to 99.8 m/s velocity range corresponds to modest line flows.

How SD6600 differs from other SD variants

The nearest relatives are the SD8500 (R 1, DN25, 14 to 3750 l/min, 1598.5 g) and the SD5000 (G 1/4, DN8, 1 to 250 l/min, 974 g). Against the SD8500 the SD6600 flows 4 to 1250 l/min, weighs 730 g and is 300 mm long instead of 475 mm. Against the SD5000 it adds multi-gas capability, minus 10 degC as lower temperature limit instead of 0 degC, and the colour display; the older SD5000 and SD9000 show a four-digit alphanumeric display instead.

Installation hints

Align the flow direction arrow, support the line so the tube is not loaded by pipe weight, and avoid fitting immediately after valves or bends where turbulence disturbs the profile. Gas selection and units are set on the display, so confirm the medium before reading totals. Use screened cable if the analogue loop shares trays with drives.

Upkeep

Gases such as argon and nitrogen are dry and clean, so cleaning is rarely needed, but check regulator outlets for particles after cylinder changes. Verify the zero reading with the supply isolated, compare against a bubble or reference meter once a year, and store the counter reading before maintenance.

Quoting notes

Send SD6600 with its order description when requesting a quotation. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Frequently asked questions about the SD6600

  • Which gases can the ifm SD6600 measure? The datasheet lists argon, carbon dioxide, nitrogen and compressed air as media, with a medium temperature of minus 10 to 60 degrees Celsius.
  • What is the flow range of the SD6600? It covers 4 to 1250 l/min, which is 0.3 to 99.8 m/s or 0.25 to 75 cubic metres per hour, in a DN15 tube with an R 1/2 external thread.
  • What display does the SD6600 have? A colour display of 1.44 inch with 128 x 128 pixels shows flow, pressure and temperature values locally.
  • What are the electrical specifications of the SD6600? Supply is 18 to 30 V DC with a current consumption under 80 mA, two PNP or NPN switching outputs, one 4 to 20 mA output, a pulse output and IO-Link.
  • How can I order the SD6600 from Seven Star LLC? Use the RFQ form with part number SD6600, quantity and destination; we reply with a quotation once availability is confirmed.

Documents and quotation

This page carries the manufacturer datasheet of the SD6600. Please include part number SD6600, the quantity required and your destination in the RFQ so that we can confirm stock position and respond with a quotation.

Datasheets & Documents
  • PDF Datasheet ifm SD6600 Industrial Gas Counter, R 1/2 DN15, IO-Link Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.

Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.

ifm company profile

Founded 1969, Essen, Germany
Founders Robert Buck and Gerd Marhofer
Headquarters Essen, Germany
Ownership Family-owned
Product families Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters

Milestones

  • 1969: ifm is founded in Essen.
  • 2001: The founders' sons take over management.

ifm sensors listed on this page

ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:

  • O1D100: laser distance sensor for position and distance measurement
  • PN7093: pressure sensor with local display
  • NG5021: inductive proximity sensor with NAMUR output

Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.

ifm products we list

Family Examples
Inductive Proximity Sensors NG5021 Inductive NAMUR Proximity Sensor
Laser Distance, LiDAR & Radar Sensors O1D100 Laser Distance Sensor
Pressure Instrumentation PN7093 Pressure Sensor with Display

Ordering ifm sensors: what we need

Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.

Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.

FAQ

Questions about the ifm SD6600 Industrial Gas Counter, R 1/2 DN15,

Answers from our engineering team on installation, compatibility and integration.

01Which gases can the ifm SD6600 measure?
The datasheet lists argon, carbon dioxide, nitrogen and compressed air as media, with a medium temperature of minus 10 to 60 degrees Celsius.
02What is the flow range of the SD6600?
It covers 4 to 1250 l/min, which is 0.3 to 99.8 m/s or 0.25 to 75 cubic metres per hour, in a DN15 tube with an R 1/2 external thread.
03What display does the SD6600 have?
A colour display of 1.44 inch with 128 x 128 pixels shows flow, pressure and temperature values locally.
04What are the electrical specifications of the SD6600?
Supply is 18 to 30 V DC with a current consumption under 80 mA, two PNP or NPN switching outputs, one 4 to 20 mA output, a pulse output and IO-Link.
05How can I order the SD6600 from Seven Star LLC?
Use the RFQ form with part number SD6600, quantity and destination; we reply with a quotation once availability is confirmed.