Brand:

SMC ITV3050-314S ITV3000 Electro-Pneumatic Regulator

Description

SMC ITV3050-314S ITV3000 electro-pneumatic regulator, 0.9 MPa range

The SMC ITV3050-314S is an electro-pneumatic regulator from the ITV3000 family. It converts an electrical command signal into a proportional output air pressure, so a controller, PLC analog card or DCS output can set the pressure of a pneumatic circuit without anyone turning a knob. This particular variant accepts a 0 to 10 VDC voltage command, covers a set pressure range of 0.005 to 0.9 MPa, and has 1/2 inch main ports with the electrical connection supplied with a straight cable connector with a 3 m cable.

A built-in digital display shows the output pressure, and the unit is rated to IP65 as stated in the catalog. The SMC ITV3050-314S is therefore suitable for panel and machine mounting where the operator wants to see the pressure and the control system wants to adjust it. Because the output follows the analog command stepless, this unit is often used where a pneumatic actuator, a clamping force, a tension, a pressure-driven dosing step or the loading pressure of a pneumatic valve needs to be changed remotely.

For buyers who maintain existing equipment, the ITV3050-314S is a common replacement item. When the nameplate of an installed regulator reads ITV3050-314S, the safest approach is to match the full code, because the pressure range, signal type, port size and cable option all change the way the unit behaves in the circuit.

Key features of the ITV3050-314S

  • Stepless proportional control: output pressure follows the 0 to 10 VDC voltage command over a set pressure range of 0.005 to 0.9 MPa.
  • Monitor output option digit 1 in the ITV3050-314S code gives a 1 to 5 VDC analog monitor of the output pressure, with an output accuracy of plus or minus 6 percent of full scale or better.
  • Linearity of plus or minus 1 percent of full scale or better, hysteresis of 0.5 percent of full scale or better, and repeatability of plus or minus 0.5 percent of full scale or better, all under static conditions.
  • Sensitivity of 0.2 percent of full scale or better and a temperature characteristic of plus or minus 0.12 percent of full scale per degree Celsius or better.
  • Built-in digital pressure display; output pressure display accuracy is plus or minus 2 percent of full scale plus or minus 1 digit.
  • Enclosure rating IP65 according to the catalog, with ambient and fluid temperature from 0 to 50 degrees Celsius and no condensation.
  • Compact body: about 645 g without options for the ITV3000 size, which keeps the ITV3050-314S easy to fit on small machines.
  • Mounting flexibility: flat bracket and L-bracket options exist for the series, and the series can be combined with F.R.L. units using a modular adapter.

ITV3050-314S technical specifications

The table below lists the values the manufacturer publishes for the ITV3050-314S and its series. Always confirm the final configuration against the datasheet before ordering.

Parameter Value
Series ITV3000 electro-pneumatic regulator
Part number ITV3050-314S
Set pressure range 0.005 to 0.9 MPa
Maximum supply pressure 1.0 MPa
Minimum supply pressure Set pressure plus 0.1 MPa
Power supply 24 VDC plus or minus 10 percent
Current consumption 0.12 A or less (24 VDC type)
Input signal 0 to 10 VDC voltage
Monitor output Analog 1 to 5 VDC (output impedance about 1 kilohm)
Linearity Plus or minus 1 percent F.S. or less
Hysteresis 0.5 percent F.S. or less
Repeatability Plus or minus 0.5 percent F.S. or less
Sensitivity 0.2 percent F.S. or less
Temperature characteristic Plus or minus 0.12 percent F.S. per degree C or less
Ambient and fluid temperature 0 to 50 C, no condensation
Enclosure IP65
Port size 1/2 (thread type Rc)
Electrical connection A straight cable connector with a 3 m cable
Weight About 645 g without options

Typical applications in Oman and the GCC

In oil and gas and petrochemical plants in Oman and the GCC, the ITV3050-314S is used on skid-mounted pneumatic systems that need a remotely adjustable air pressure, for example to set the loading pressure of a valve positioner test bench, to drive a pneumatic pilot line, or to regulate purge and instrument air to an analyzer shelter. The IP65 enclosure and the 0 to 50 degree range suit most indoor panels and shaded outdoor cabinets.

In utilities, water and wastewater works, the ITV3050-314S can control the air pressure on pneumatic dosing, aeration or damper actuators from a PLC. In manufacturing and packaging, the same regulator sets clamping, pressing and tension forces from a recipe, so operators change a product without touching a manual regulator. Because the command is a standard analog signal, the ITV3050-314S integrates with the analog output cards that are already present in most control cabinets.

An electro-pneumatic regulator replaces the manual knob of a pressure regulator with an electrical set point. Inside the housing, solenoid valves and a pressure sensor work with the electronics so that the controller keeps the output at the value requested by the command signal. For the engineer this means that a pressure can be changed from the control room, stored in a recipe or ramped over time, without a technician visiting the machine.

In a typical plant the supply to such a regulator comes from the instrument air or plant air header through a filter. A pressure drop in that header, or a load that consumes a lot of air downstream, can show up as a pressure fluctuation at the output, so it is good practice to size the line, keep the tubing short and place a small volume tank after the regulator when the load pulses. These points are valid for the whole ITV family and help to get the stated accuracy in the real installation.

Because the command is a standard analog signal, commissioning is straightforward: with the supply connected and the power on, the technician applies the lowest and the highest values of the command from a loop calibrator and checks that the displayed pressure follows. If the plant already holds spare units of the same family, a technician can transfer the settings in a few minutes, which keeps downtime short during a breakdown.

Many buyers in Oman ask for the exact code because they are replacing a regulator that has failed on an older machine and the machine builder is no longer easy to reach. In those cases the nameplate, a photo of the unit and the supply voltage and signal type give us what we need to confirm the right variant before you place an order.

Selection and compatibility notes for the ITV3050-314S

Start with the pressure range. The ITV3050-314S is the 0.9 MPa range type with a maximum supply pressure of 1.0 MPa; the supply must be at least 0.1 MPa above the set pressure you need. If the process needs a higher pressure than 0.9 MPa, choose another pressure range code rather than relying on the upper limit of this one.

Match the command signal to your controller. The ITV3050-314S expects a 0 to 10 VDC voltage signal, and the supply is 24 VDC; the 12 to 15 VDC power variants and the communication models use different codes and are not covered by this part number. The monitor output in this variant is a 1 to 5 VDC analog signal, which should be read with a load impedance of at least 100 kilohm to keep the stated accuracy.

Confirm the port size and size class. The ITV3050-314S has 1/2 inch ports in the ITV3000 body, and the three size classes ITV1000, ITV2000 and ITV3000 are not interchangeable in flow capacity. Note also that the unit controls pressure in static conditions; when air is consumed downstream, the pressure may fluctuate, so size the unit to the demand of the circuit.

Reading the part number

  • ITV: electro-pneumatic regulator series; 3000: 3000 size class.
  • 5: set pressure range code, 0.005 to 0.9 MPa (maximum supply 1.0 MPa).
  • 0 in the fourth position of the series block: 24 VDC power supply.
  • 3: input signal 0 to 10 VDC voltage.
  • 1: analog output 1 to 5 VDC as monitor output.
  • 4: port size 1/2 inch.
  • S: a straight cable connector with a 3 m cable.

Installation and commissioning of the ITV3050-314S

Mount the ITV3050-314S on a flat surface or with the optional bracket, keeping the display visible. Connect the supply air through a suitable filter so that dirt does not reach the internal valves, and connect the output port to the circuit. Where the IP65 rating must be maintained, the catalog instructs the user to connect a fitting or tube to the exhaust port of the built-in solenoid valve, so plan the exhaust routing at the design stage.

Wire the 24 VDC supply, the 0 to 10 VDC voltage command and, if used, the monitor output according to the datasheet pin table. With the ITV3050-314S, a cable connector is included in the form of a straight type 3 m cable. After powering up, apply a low command, check that the display and the output pressure follow, and then perform the zero and span checks described in the manual before releasing the unit to the process.

Maintenance and service life

The ITV3050-314S contains no user serviceable consumables in normal duty. Keep the supply air clean and dry, check the supply pressure margin periodically, and compare the displayed pressure with a reference gauge during scheduled instrument checks. If the output drifts from the command, verify the supply pressure, the wiring and the load impedance of the control output before suspecting the regulator itself.

When a unit reaches the end of its service life or is damaged, replace it with the same code. Record the ITV3050-314S code, the serial number and the application pressure on the maintenance file so that a replacement can be sourced quickly in Oman or the GCC.

Related products and ordering notes

Other members of the series use the same code structure, so a buyer can move between pressure ranges, signal types and port sizes by changing the relevant digits. For manufacturers’ accessories such as brackets and cable connectors, quote the ITV3050-314S together with the accessory part numbers listed in the datasheet. If you are not sure which variant is installed on your machine, send a photo of the nameplate with the RFQ and we will help to identify the correct code.

SMC ITV3050-314S vs Other SMC Electro-Pneumatic Regulator Variants

Engineers usually shortlist the SMC ITV3050-314S after confirming ITV3050-314S ITV3000 against the duty point. If you are standardising spares across several units, tell us which variants are already installed so we can quote the matching SMC ITV3050-314S and any common seals, coils or accessories together.

Variant Distinguishing detail
SMC ITV2030-312S ITV2000 Electro-Pneumatic Regulator ITV2030-312S ITV2000
SMC ITV2050-212S ITV2000 Electro-Pneumatic Regulator ITV2050-212S ITV2000
SMC ITV2050-312S ITV2000 Electro-Pneumatic Regulator ITV2050-312S ITV2000
SMC ITV3050-314S ITV3000 Electro-Pneumatic Regulator (this page) ITV3050-314S ITV3000
SMC ITV3030-312S ITV3000 Electro-Pneumatic Regulator ITV3030-312S ITV3000
SMC ITV2030-212S ITV2000 Electro-Pneumatic Regulator ITV2030-212S ITV2000

Frequently asked questions about the ITV3050-314S

  • What does the ITV3050-314S do? The ITV3050-314S is an electro-pneumatic regulator that converts a 0 to 10 VDC voltage command into a proportional output air pressure in the range 0.005 to 0.9 MPa, with a digital display.
  • What supply pressure does the ITV3050-314S need? The supply pressure must be at least 0.1 MPa above the set pressure, and the maximum supply pressure for this 0.9 MPa range code is 1.0 MPa.
  • What power supply does the ITV3050-314S use? The ITV3050-314S is the 24 VDC variant, with a tolerance of plus or minus 10 percent and a current consumption of 0.12 A or less.
  • Is the ITV3050-314S suitable for outdoor use? The catalog gives an IP65 enclosure and an ambient and fluid temperature of 0 to 50 degrees Celsius without condensation, so shade, shelter and exhaust routing should be planned.
  • How do I request a quotation for the ITV3050-314S? Send an RFQ to Seven Star LLC with the part number ITV3050-314S, the quantity and your delivery location, and our team will confirm availability and lead time.

Documents and quotation

The manufacturer catalog covering the ITV3050-314S is available as a datasheet download on this page, and it is the document to check for dimensions, wiring and option codes. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. To receive a quotation, send the RFQ with the part number ITV3050-314S, the quantity, the required voltage or signal, the connection standard and your delivery location in Oman or the GCC. Our team will confirm availability and lead time for the ITV3050-314S and reply with a formal offer.

Other Models in the ITV3000 Range

Seven Star LLC supplies models from the ITV3000 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
SMC ITV3050-314S ITV3000 Electro-Pneumatic RegulatorRegulatorsYou are viewing this model
SMC ITV3030-012S ITV3000 Electro-Pneumatic RegulatorRegulatorsView details
Datasheets & Documents
  • PDF Datasheet SMC ITV3050-314S Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

SMC is the Japanese specialist in pneumatic automation: air preparation units, solenoid valves, cylinders, fittings, process valves and sensors. Yoshiyuki Takada founded the company in Tokyo on 27 April 1959 as Shoketsu Kinzoku Kogyo, which means Sintered Metal Corporation, and its first products were sintered metal filters. SMC Corporation is headquartered in Tokyo and listed on the Tokyo Stock Exchange, and its products are used on machines and instrument air lines across the world.

Seven Star LLC, an independent supplier in Oman, lists SMC AW series filter regulators (AW20 and AW40) and the VX2 series direct-operated 2-port solenoid valve, and sources other SMC parts by full part number.

SMC company profile

Founded 27 April 1959, Tokyo, Japan, as Shoketsu Kinzoku Kogyo (Sintered Metal Corporation)
Founder Yoshiyuki Takada (1928–2024)
First products Sintered metal filters; pneumatic air line equipment from 1961
Headquarters Tokyo, Japan
Ownership SMC Corporation, a public company listed on the Tokyo Stock Exchange
Product families AF/AR/AW modular air preparation, VT/VQ/SY solenoid valves, VX/VXZ 2-port valves, air cylinders and rotary actuators, fittings and tubing, pressure and flow switches, vacuum equipment

Milestones

  • 1959: Shoketsu Kinzoku Kogyo is founded in Tokyo on 27 April and starts making sintered metal filters.
  • 1961: Pneumatic air line equipment is added.
  • 1964: Automatic control equipment becomes part of the business.
  • 1967: The first overseas operation starts, with a stake in an Australian company.
  • 1970: SMC begins making air cylinders.

SMC series listed on this page

The AW is a combined filter and pressure regulator in SMC's modular air preparation line. The body size is in the name: AW20 is the smaller unit and AW40 the larger, and the digits after the dash give the port size. A part number such as AW40-04-A therefore describes body size, port and options in one string. The VX2 is a direct-operated two-port solenoid valve for shutting off air, water, oil or steam, depending on the body and seal materials chosen.

SMC products we list

Family Examples
Pneumatic Cylinders CA2B50-100 Tie Rod Air Cylinder 50 mm Bore, CP96SDB63-100C ISO 15552 Cylinder 63 mm Bore, CRQ2BS20-90 Compact Rotary Actuator Size 20, CY1S20-300Z Magnetically Coupled Rodless, CY3B25-300Z Magnetically Coupled Rodless, MB1B40-100Z Square Tube Air Cylinder 40 mm, MGPM40-25Z Compact Guide Cylinder 40 mm Bore, MHC2-16D Angular Air Gripper 16 mm Bore and 6 more
Solenoid Valves SY3120-5LZD-M5 Compact 5-Port Solenoid Valve, SY5120-5LZD-01 5-Port Solenoid Valve SY5000, SY7120-5LZD-02 5-Port Solenoid Valve SY7000, VK3120-5G-M5 Direct Operated 5-Port Solenoid, VQC1101-5 Plug-in 5-Port Solenoid Valve, VQC4101-5 Plug-in 5-Port Solenoid Valve, VT307-5G1-01 3-Port Direct Operated Solenoid, VX2 Series Direct-Operated 2-Port Solenoid and 1 more
Regulators AF30-03 Modular Air Filter 3/8 Rc, AR30-03 Modular Pressure Regulator 3/8 Rc, AW20 Air Filter & Pressure Regulator, AW40 Series Modular Filter Regulator

Ordering SMC parts: what we need

Give the complete SMC part number from the label, including thread prefix, options and the final suffix letter. For AW units state gauge, drain type and bracket if you need them. For VX2 valves send coil voltage, port size, orifice, body and seal material, and the fluid. Buyers in the GCC often have NPT or G threads on site, so say which thread standard the piping uses.

Facts checked against SMC's published corporate history, October 2026.

FAQ

Questions about the SMC ITV3050-314S ITV3000 Electro-Pneumatic Regulator

Answers from our engineering team on installation, compatibility and integration.

01What does the ITV3050-314S do?
The ITV3050-314S is an electro-pneumatic regulator that converts a 0 to 10 VDC voltage command into a proportional output air pressure in the range 0.005 to 0.9 MPa, with a digital display.
02What supply pressure does the ITV3050-314S need?
The supply pressure must be at least 0.1 MPa above the set pressure, and the maximum supply pressure for this 0.9 MPa range code is 1.0 MPa.
03What power supply does the ITV3050-314S use?
The ITV3050-314S is the 24 VDC variant, with a tolerance of plus or minus 10 percent and a current consumption of 0.12 A or less.
04Is the ITV3050-314S suitable for outdoor use?
The catalog gives an IP65 enclosure and an ambient and fluid temperature of 0 to 50 degrees Celsius without condensation, so shade, shelter and exhaust routing should be planned.
05How do I request a quotation for the ITV3050-314S?
Send an RFQ to Seven Star LLC with the part number ITV3050-314S, the quantity and your delivery location, and our team will confirm availability and lead time.