- Automation & ControlView all 2,718 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Cortem
Cortem CCA-02C Ex d Aluminium Junction Box IIC
Description
Cortem CCA-02C overview
Cortem CCA-02C is a small Ex d aluminium enclosure, hinged cover that belongs to the CCA..C series of flameproof aluminium enclosures for gas group IIC with a hinged cover, for Zone 1, 2, 21 and 22. Buyers in Oman and across the GCC look for this exact code when they replace, extend or document hazardous-area installations, and the data below is taken from the manufacturer catalogue sheet for the series. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Cortem CCA-02C is one specific size or lamp rating in a wider range. The series name appears in the part number, and the table later on this page shows the dimensions and ratings that belong to this code only. Quote the full code CCA-02C exactly as written when you contact us, because neighbouring sizes look similar but do not share the same internal volume or fixing centres.
Key features of CCA-02C
- Flameproof joint machined on the inside of the body, which suits covers that carry control and signalling operators
- Gas group IIC protection plus dust protection (Ex tb IIIC Db) at IP66
- Five sizes in the series, from CCA-0C to CCA-04C
- Options on request: orange anti-condensation interior paint RAL 2004, breather or drain ECD-210S, epoxy paint in other colours, internal frames TF-..E, bottom drilling
- NPT, Rp/Rc and metric thread options for the entries
CCA-02C technical specifications
| Parameter | Value |
|---|---|
| Part number | CCA-02C |
| Series | CCA..C |
| External size A x B x C | 195 x 195 x 160 mm |
| Cover diameter D | 212 mm |
| Internal size a x b x c | 171 x 171 x 130 mm |
| Cover thread | M200 x 3 |
| Fixing E x F | 175 x 175 mm, hole 10 mm |
| Parameter | Value |
|---|---|
| Marking (empty enclosure) | II 2 GD, Ex db IIC Gb, Ex tb IIIC Db, IP66 |
| ATEX certificate | CESI 01 ATEX 034U |
| IECEx certificate | CES 14.0012U |
| Ambient temperature (empty) | -20 to +60 C standard; -60 to +60 C special |
| Ingress protection | IP66 |
| Standards | EN 60079-0, EN 60079-1, EN 60079-31, EN 60529; Directive 2014/34/EU |
| Parameter | Value |
|---|---|
| Body and cover | Low-copper aluminium alloy; cover with hinges coupled to the body by a cylindrical joint |
| Hinges | Stainless steel |
| Cover gasket | Silicone between body and cover |
| Fasteners | Stainless steel |
| Earth screws | Stainless steel, internal and external, with anti-rotation brackets |
| Fixing | Cast aluminium feet |
| Finish | Polyester paint RAL 7035 light grey |
The values above come from the manufacturer documentation for the series. Where a figure is not listed for CCA-02C in that documentation, it is left out here rather than estimated.
Typical applications for CCA-02C in Oman and the GCC
The series is used for control and signalling panels, lighting and power distribution boards, motor starter boxes and surge-arrester housings. In oil and gas, refineries, gas processing, pipelines, onshore and offshore platforms and loading terminals use these products wherever a flammable atmosphere may form. Power utilities and desalination and water plants use them in fuel handling, chemical dosing and treatment areas, while manufacturing and petrochemical sites use them in solvent, paint and process areas. The coastal climate of Oman and the Gulf makes the manufacturer corrosion and salt-mist data relevant when you compare materials.
Selection and compatibility notes for CCA-02C
The CCA..C version is the one recommended by the manufacturer when operators are mounted on the cover. If you mainly need terminal space and easier access, the screw-cover CCA..E version is the usual alternative. The same family also has certificates for versions with terminals, control units, surge arresters and interface units.
Before ordering CCA-02C, confirm the zone and gas group of the area, the required temperature class, the number and size of cable entries, the ambient temperature range and the finish. Entries and glands must carry their own ATEX or IECEx approval and a suitable ingress rating, and any change to the certified construction should be agreed with the manufacturer first.
Installation and commissioning of CCA-02C
Install CCA-02C according to EN/IEC 60079-14 and the manufacturer instructions. Fix it on a flat support using the supplied fixing points, make the protective earth connection on the stainless steel earth screw, fit certified glands or stopping plugs in every entry, and close the cover completely before energising. The manufacturer notes that drilling of the body should be done by Cortem or by a workshop that holds the production notification under the ATEX Directive, so order the entries you need together with the enclosure.
Maintenance of CCA-02C
Open the hinged cover only after isolation and the permitted waiting time, keep the flameproof joint clean, check the silicone gasket, and keep the earth connections tight. Inspect the product on the schedule set by your site procedure for Ex equipment, and replace any gasket, glass or fastener that shows damage using parts that match the original specification.
Related products and ordering notes
The same Cortem catalogue includes cable glands, breather and drain valves, internal mounting frames, control and signalling operators, plugs and sockets and luminaires that are often supplied together with CCA-02C. When you send the RFQ, list the accessories and any drilling pattern you need so that the quotation covers the complete assembly. Lead time and availability are confirmed per request.
FAQ summary for CCA-02C
The questions below cover the points buyers ask most about CCA-02C: what it is, which ratings apply, whether a datasheet is available and how to request a quotation. Always check the current certificate before using the product in a classified area.
Hazardous-area purchasing in the Gulf usually involves a project specification, an inspection and test plan and a documentation package, so it helps to state early whether you need certificates, drawings or a certificate of conformity with the order. Buyers who maintain older plants also use this page to match a replacement against the code printed on an existing nameplate, and to check dimensions before cutting new openings in a panel or on a support frame. Quantities from a single spare to a full project lot can be quoted, and mixed orders that combine enclosures, glands, luminaires and accessories are handled in one quotation.
Documents and quotation
A manufacturer catalogue sheet for the series (in Italian) is attached to this page as the datasheet for CCA-02C. To receive a quotation, send us the RFQ with the part number CCA-02C and the quantity you need, plus the zone, gas group and delivery destination in Oman or the GCC. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Other Models in the CCAC Range
Seven Star LLC supplies models from the CCAC range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Cortem CCA-02C Ex d Aluminium Junction Box IIC | Switchgear, Enclosures & Distribution | You are viewing this model |
| Cortem CCA-04C Ex d Aluminium Junction Box IIC | Switchgear, Enclosures & Distribution | View details |
Datasheets & Documents
- Datasheet Cortem CCA-02C Ex d Aluminium Junction Box IIC Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Cortem is the Italian maker of explosion-proof and increased-safety electrical equipment: Ex d and Ex e lighting, enclosures, control stations, plugs and sockets, cable glands and signalling devices. Marco Rossi and Renato Gratton founded the company on 24 February 1968 in Villesse, in the Friuli Venezia Giulia region of north-east Italy. Cortem S.p.A. heads the Cortem Group, which also includes Elfit and the Fondisonzo foundry, and supplies onshore and offshore oil and gas, chemical and industrial plants.
Seven Star LLC is an independent supplier in Muscat. We list Cortem junction boxes, lighting, plugs and sockets and control stations for oil and gas and process projects in Oman and the GCC.
Cortem company profile
| Founded | 24 February 1968, Villesse (Gorizia), Italy |
|---|---|
| Founders | Marco Rossi and Renato Gratton |
| Name | From the Italian for electromechanical construction and technical representation |
| Group companies | Cortem S.p.A., Elfit and Fondisonzo |
| Approvals | ATEX and IECEx certified explosion-protected equipment |
| Product families | Ex d and Ex e luminaires and LED fittings, emergency and exit lights, obstruction lights, junction and control boxes, control stations, plugs and sockets, cable glands, alarm and signalling devices |
Milestones
- 1968: Marco Rossi and Renato Gratton found Cortem in Villesse on 24 February.
- 2011: Research and development on LED lighting for hazardous areas begins.
- 2012: The first Cortem LED fixture series is launched.
- 2022: The third generation of Cortem LED fixtures is released.
Cortem product series
Enclosures include the EJBX stainless steel Ex d junction boxes, EJBC aluminium Ex d boxes for gas group IIC, the SA and SAG Ex eb aluminium boxes in 18 sizes and the EJBE and EJBXE Ex de control and distribution boards. Control and power connection products include the CMD Ex e fibreglass control stations and the PYN, SPYN and CMBSP07 Ex plugs and sockets from 16 to 125 A.
Lighting covers the SLED-ME and EVL-40 Ex LED floodlights, the Ex nR SLED-MN and EVNL-40 floodlights for zone 2, the LIFEX-M linear fixture, the FLOWEX high bay, the EVML low bay, STREETEX street lighting and the XLFE-LIB and XLFE-MIA obstruction lights for stacks and towers. The GRDE-4200 is an electronic earthing system for road tanker loading bays.
Where Cortem equipment is used
Refineries, gas plants, tank farms and loading terminals, offshore platforms and ships, chemical and pharmaceutical plants and mining. Products are certified to ATEX and IECEx, with other schemes according to model.
Cortem products we list
Ordering Cortem products: what we need
Send the model code, the zone and gas or dust group, temperature class, ingress protection, the certification scheme required, and for enclosures the size, entries and internal components. For lighting give the wattage, voltage and mounting; for plugs and sockets the current, poles and voltage.
Facts checked against Cortem Group's published company history, October 2026.
Browse Cortem products by category: Automation Accessories.
FAQ
Questions about the Cortem CCA-02C Ex d Aluminium Junction Box IIC
Answers from our engineering team on installation, compatibility and integration.
01What is Cortem CCA-02C?
CCA-02C is a Ex d aluminium enclosure, hinged cover from the Cortem CCA..C series, rated for Zone 1, 2, 21 and 22 hazardous areas with IP66 ingress protection or better.
02Which certificates apply to CCA-02C?
The catalogue lists CESI 01 ATEX 034U and CES 14.0012U for the series. Check the certificate for the exact version you order before installation.
03Is a datasheet available for CCA-02C?
Yes. The manufacturer catalogue sheet for the series is attached to this page. It is written in Italian and contains the dimensions, certification data and accessories.
04Does Seven Star LLC manufacture or represent Cortem?
No. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
05How do I request a quote for CCA-02C?
Send the RFQ with the part number CCA-02C, the quantity, the area classification and the delivery location. We reply with availability and lead time.


















Reviews
There are no reviews yet.