IDS cards,RC8DA . 160050037

Overview

The IDS RC8DA is a radio clock module for the VIVAVIS IDS telecontrol and automation system (IDS 640/650/850), giving the RTU station an accurate, externally synchronized time base. Its function is time synchronization, not analog signal output – a distinction worth stating plainly, since the card is sometimes miscatalogued as an analog output module when it is in fact the station’s timekeeping reference.

Seven Star LLC supplies the IDS RC8DA across Oman and the GCC for utilities and integrators who need accurately time-stamped event and measurement data from their VIVAVIS IDS telecontrol stations, a requirement in power grid fault recording and sequence-of-events analysis.

Operating Principle

The RC8DA receives a time signal from a radio time transmitter and derives the station’s system time from it, keeping every event, alarm, and measurement the IDS station logs stamped against a consistent, externally verified time reference rather than the station’s own free-running clock.

When the radio time signal is temporarily unavailable, the module maintains time using a battery-buffered real-time clock, so the station’s event timestamps stay consistent through brief signal interruptions rather than drifting or resetting.

Engineering Design of the IDS RC8DA

The card shares the same rack-mount form factor as the rest of the IDS 640/650/850 module family, installing into an existing IDS rack alongside communication, digital I/O, and analog I/O cards without a separate mechanical standard.

Accurate, station-wide time synchronization matters most in installations where events across multiple substations or telecontrol stations need to be correlated after the fact – a fault sequence spanning several sites can only be reconstructed correctly if every station’s event log shares the same time reference, which is exactly what the RC8DA provides.

Key Features

• Radio time signal reception for station-wide time synchronization
• Battery-buffered real-time clock maintains accuracy during signal loss
• Ensures consistent timestamping of events, alarms, and measurements
• Supports cross-station sequence-of-events correlation
• Rack-mount form factor compatible with the full IDS module family
• Genuine replacement/expansion card for existing IDS installations
• Built for substation and remote-site environments
• Critical for power grid fault recording and event analysis

Industrial Applications

The IDS RC8DA is used in power utility substations and telecontrol stations across Muscat, Sohar, Salalah, and the wider GCC wherever accurately time-stamped event and measurement data is required for fault recording, sequence-of-events analysis, or grid-wide event correlation.

Seven Star LLC supplies the RC8DA for utilities and system integrators maintaining or expanding existing VIVAVIS IDS telecontrol installations, sourcing the genuine time-synchronization card correctly identified for its actual function.

Technical Specifications

Why Choose Seven Star LLC for the VIVAVIS IDS RC8DA Time Synchronization Module

The RC8DA’s role is to provide accurate, battery-buffered timekeeping for event and fault timestamping across your substation, which matters far more than it might first appear, since correctly ordered event timestamps are often what allow engineers to reconstruct the actual sequence of events during a fault investigation. A drifting or incorrectly configured time source can make two genuinely sequential events appear to happen in the wrong order in your event log, complicating root-cause analysis exactly when accuracy matters most. Seven Star LLC confirms your existing time synchronization source, whether that is GPS, a radio clock signal, or a network time source, before recommending a replacement RC8DA, since compatibility with your specific reference matters as much as the module itself.

For substations where the RC8DA’s battery-buffered clock is the last line of defense against a loss of external time reference, we help utility operators across Oman and the wider GCC plan battery replacement on a realistic schedule tied to the module’s actual service life, rather than waiting for a failure to reveal that the backup clock was no longer holding time accurately. Where a facility is investigating unexplained event timestamp discrepancies, we are glad to help think through whether the RC8DA itself, its reference source, or a configuration issue elsewhere is the more likely cause before recommending a replacement. For utility operators managing multiple substations, keeping time synchronization sources consistent across the whole network matters just as much as any single module’s accuracy, since comparing event logs between substations during a wider fault investigation requires that every site’s timestamps share a genuinely common reference. We help operators standardizing their telecontrol fleet confirm that time synchronization configuration is consistent across sites, not just correct at each site in isolation.

We also recommend periodic verification of the RC8DA’s actual time accuracy against a known-good reference, rather than assuming correct operation indefinitely once a module has been commissioned, since a slowly drifting internal clock is not always obvious from routine operation alone. This is a small, low-cost check that can prevent a much more difficult reconciliation problem during an actual fault investigation months or years later.

Reach out with your current time reference source and any timestamp discrepancies you have observed, and our team will help confirm whether a replacement module, a reference source issue, or a configuration adjustment is the right next step, along with a realistic delivery timeline if a replacement is needed.

Request a Quote for IDS cards,RC8DA . 160050037

Contact Seven Star LLC to order a genuine IDS RC8DA time synchronization card for your VIVAVIS telecontrol installation in Oman and the GCC.

Related Products

• Chadwick-Helmuth Model 11/11A/11B
• ABB TTF300.S3.C.2.H.BF-C4.C Field-Mount Temperature Transmitter
• IDS cards ,SM85A
• KOBELCO LUBR I CATOR ASSY
• SEW-Eurodrive Brake BMG1 10Nm – Part No: 08671427
• Chadwick-Helmuth Photocell System for 8500C