Brand:

Swagelok 6DB Series Instrumentation Blowdown Valve, 316 SS

Description

Swagelok 6DB series instrumentation blowdown valve, 316 SS, union bonnet

The Swagelok 6DB series is a quarter-inch-class instrument blowdown valve designed to be used fully open or fully closed. It is built for the job of blowing down, venting or draining instrument lines on steam, water and process services, where the line can be hot and the valve must survive thermal cycling. The body, bonnet and stem are 316 stainless steel, the bonnet is a union design for safe maintenance, and Grafoil packing gives the stem seal the temperature capability required for steam. Seven Star LLC supplies Swagelok 6DB blowdown valves in Oman and the GCC as an independent supplier in Muscat.

The series has a single orifice of 0.250 in. (6.4 mm) and a flow coefficient (Cv) of 0.86, and it is offered with Swagelok tube fitting, female NPT and socket weld end connections.

Parameter Specification
Manufacturer / part number Swagelok 6DB series instrumentation blowdown valve (ordering numbers such as SS-6DBS6, SS-6DBF4)
Working pressure 6,000 psig (413 bar) at −65 to 100 °F
Temperature Up to 1,200 °F (648 °C); 1,715 psig (118 bar) at 1,200 °F
Steam rating Maximum 700 °F (371 °C) at 3,000 psig (206 bar)
Orifice and Cv 0.250 in. (6.4 mm); Cv 0.86
Body, bonnet, stem 316 SS (ASTM A479 and A276); chrome-plated stem tip
Packing Grafoil
Handle Anodized aluminum (2024-T)
Bonnet design Union bonnet
Factory test Nitrogen at 1,000 psig (69 bar); seat leak rate max 0.1 std cm³/min

Design features of the 6DB valve

The 6DB stem is an ordinary needle-style stem with a chrome-plated ball tip that gives repeatable shutoff, and the packing bolt, jam nut and union nut let the packing be adjusted and the bonnet removed with the valve under controlled conditions. The packing is Grafoil, which is the right choice for hot steam and the reason this valve carries ratings to 1,200 °F.

The catalog advises that the valve is meant for fully open or fully closed service and not for throttling. It also notes that a packing adjustment may be required periodically to prolong service life and avoid leakage, that valves not cycled for a period of time may have a higher initial actuation torque, and that operators should apply only as much torque as is needed for positive shutoff.

  • Union-bonnet construction for safe disassembly.
  • 316 stainless steel pressure boundary.
  • Grafoil packing for high-temperature performance.
  • Several end connection types: tube fittings, female NPT, tube and pipe socket weld.

Pressure-temperature ratings of the 6DB series

Temperature Working pressure
−65 to 100 °F (−53 to 37 °C) 6,000 psig (413 bar)
300 °F (148 °C) 4,660 psig (321 bar)
500 °F (260 °C) 3,980 psig (274 bar)
700 °F (371 °C) 3,600 psig (248 bar)
900 °F (482 °C) 3,280 psig (225 bar)
1,000 °F (537 °C) 3,030 psig (208 bar)
1,100 °F (593 °C) 2,685 psig (184 bar)
1,200 °F (648 °C) 1,715 psig (118 bar)

The ratings are for the valve body; valves with tube fitting ends are limited by the tubing data. For steam, the maximum is 700 °F (371 °C) at 3,000 psig (206 bar).

Ordering numbers and dimensions

End connection Ordering number Length A
1/4 in. female NPT SS-6DBF4 2.25 in. (57.2 mm)
3/8 in. female NPT SS-6DBF6 2.25 in. (57.2 mm)
3/8 in. Swagelok tube fitting SS-6DBS6 2.83 in. (71.9 mm)
1/2 in. Swagelok tube fitting SS-6DBS8 3.04 in. (77.2 mm)
10 mm Swagelok tube fitting SS-6DBS10MM 2.85 in. (72.4 mm)
12 mm Swagelok tube fitting SS-6DBS12MM 3.04 in. (77.2 mm)
3/8 in. tube socket weld SS-6DBSW6T 2.25 in. (57.2 mm)
1/2 in. tube socket weld SS-6DBSW8T 2.25 in. (57.2 mm)
1/4 in. pipe socket weld SS-6DBSW4P 2.25 in. (57.2 mm)

The overall height of the valve is 3.70 in. (94.0 mm) and the handle is 2.50 in. (63.5 mm) across, with the dimensions given for reference only.

Installation and maintenance

Use the valve in a clean position where it is accessible and where the discharge can be directed to a safe place, because blowdown of steam or hot water is hazardous. Make up Swagelok tube fitting ends according to the Swagelok instructions and do not mix components with those of other manufacturers. For socket weld versions, observe welding procedures suitable for 316 SS. Cycle the valve occasionally in service so that the initial actuation torque does not build up, and check packing adjustment at planned shutdowns.

Every 6DB valve is cleaned and packaged to Swagelok SC-10 standard cleaning. For instrument lines handling oxygen, the system designer must consider special cleaning separately.

Use in Oman and the GCC

Steam and water instrumentation in Gulf power and desalination plants is the classic application of blowdown valves: boiler drum level and pressure impulse lines, feedwater and condensate sample lines, and steam turbine instrumentation. They are also useful on instrument impulse lines at refineries and gas plants where hot condensate or particulates must be cleared. High ambient temperature, scale and dust make robust packing and a union bonnet useful, and the 316 SS body resists the humid, saline atmosphere at coastal sites.

Selection checklist for a 6DB blowdown valve

  • Process fluid, normal and maximum temperature and pressure; steam applications have their own 700 °F at 3,000 psig limit.
  • End connection type and size.
  • Discharge location and routing.
  • Flow requirement against Cv 0.86.
  • Need for valve locks or actuation, which are listed in other Swagelok catalogs.

If a more complex arrangement is needed, such as a double block and bleed at the instrument, consider the Swagelok manifold options.

Information to send with a 6DB RFQ

  • Service, temperature and pressure.
  • End connection and size.
  • Quantity, location and documents required.

Documents and quotation

The Swagelok instrumentation blowdown valve catalog for the 6DB series is attached to this page. Send your service conditions and connection requirement and we will confirm the ordering number and available documents.

Datasheets & Documents
  • PDF Catalog Swagelok 6DB Series Instrumentation Blowdown Valves Catalog Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Swagelok is the American maker of tube fittings and small-bore valves, best known for its two-ferrule compression tube fitting. Fred A. Lennon and Cullen B. Crawford founded it in Cleveland, Ohio, in July 1947 as Crawford Fitting Company to make that fitting. Lennon bought the whole business and the patent in 1948, and the company has been based in Solon, Ohio, since the mid-1960s.

Seven Star LLC is an independent supplier in Muscat. We list Swagelok tube fittings, needle, ball, check, relief and metering valves, filters, regulators and sample cylinders, and supply them for instrument tubing and analyser systems in Oman and the GCC by exact part number.

Swagelok company profile

Established July 1947, Cleveland, Ohio, as Crawford Fitting Company
Founders Fred A. Lennon and Cullen B. Crawford; Lennon bought out Crawford in 1948
Headquarters Solon, Ohio, since the mid-1960s
Product families Tube fittings and adapters, face seal fittings, needle, ball, plug, check, relief and diaphragm valves, filters, regulators, quick-connects, sample cylinders and hoses

Milestones

  • 1947: Fred A. Lennon and Cullen B. Crawford found Crawford Fitting Company in Cleveland in July.
  • 1948: Lennon buys out Crawford.
  • Mid-1960s: Headquarters move to Solon, Ohio.

Swagelok products we list

Family Models Typical use
Tube fittings Overview, SS-810-6 union, SS-810-3 tee, SS-810-9 elbow, SS-810-4 cross, SS-810-1-8 male connector, SS-810-7-8 female connector, SS-810-61 bulkhead, SS-12M0-6 metric union, VCR face seal Leak-tight connections on instrument and process tubing
Needle and metering valves SS-1RS4, SS-1RF4, SS-18RF6, SS-6NBS6, SS-20VS4, SS-4MG Isolation and fine flow adjustment on instrument lines and sample systems
Ball and plug valves 40G, 40GX 3-way, 60 Series, 83 Series, P4T plug Quick quarter-turn shut-off and switching
Check, relief and sealed valves SS-4C-1, CH, R3A, RL3, SS-4BK bellows, SS-DLS4 diaphragm Backflow prevention, overpressure relief and leak-free sealing for toxic or high-purity media
Filters, regulators, sampling SS-4F-2, SS-4TF-7, KPR regulator, sample cylinders, QC quick-connects Analyser sample conditioning and gas or liquid sampling

A Swagelok part number can be read directly. In SS-810-6, "SS" is 316 stainless steel, "810" means a 1/2 in. tube fitting (8 sixteenths of an inch, 10 series), and "-6" is a union. A suffix such as "-8" adds a 1/2 in. NPT end, and "M0" marks metric tube, as in SS-12M0-6 for 12 mm. Tube fittings must be made up the same way every time: finger-tight, then 1 1/4 turns for most sizes. A gap inspection gauge confirms the fitting has been pulled up.

Where Swagelok products are used

In Oman and the GCC, Swagelok fittings and valves are used on instrument impulse lines, analyser sample systems, hydraulic and pneumatic control tubing, chemical injection and gas sampling in oil and gas, refining, petrochemical, power and laboratory installations.

Ordering Swagelok products: what we need

Send the full Swagelok part number (for example SS-810-6 or SS-1RS4), the material, and the tube size in inches or millimetres. For valves, add the end connections and any options. For sample cylinders, add the volume, pressure rating and end configuration.

Facts checked against Swagelok company history, October 2026.

FAQ

Questions about the Swagelok 6DB Series Instrumentation Blowdown Valve,

Answers from our engineering team on installation, compatibility and integration.

01What is the Swagelok 6DB series used for?
It is an instrumentation blowdown valve for fully open or fully closed duty in steam and process instrument lines.
02What is the pressure and temperature range?
The rating is 6,000 psig (413 bar) at minus 65 to 100 degrees F, falling to 1,715 psig (118 bar) at 1,200 degrees F. The steam maximum is 700 degrees F at 3,000 psig.
03What packing does it use?
Grafoil packing, which provides the high-temperature capability of the valve.
04What is the flow coefficient?
The orifice is 0.250 in. (6.4 mm) with a Cv of 0.86.
05What end connections are available?
Swagelok tube fittings, female NPT, tube socket weld and pipe socket weld, in sizes from 1/4 to 1/2 in. and 10 to 12 mm.