Baker Hughes Druck DPI 705E Precision Pressure Indicator

Overview: Baker Hughes DPI 705E

The Baker Hughes DPI 705E (Druck DPI 705E) is a handheld precision pressure indicator built for technicians who need laboratory-grade accuracy in a rugged field-ready package. Covering 41 pressure ranges from ±25 mbar to 1,400 bar (±10 inH2O to 20,000 psi), the DPI 705E combines a tough IP54-sealed enclosure with a high-contrast backlit display, giving maintenance and calibration teams a single instrument for routine gauge checks, transmitter verification, and leak testing across virtually the entire industrial pressure spectrum.

As the official authorized partner and exclusive regional representative for Baker Hughes Druck instrumentation, Seven Star LLC proudly supplies the DPI 705E Series to calibration laboratories, oil and gas facilities, and process plants throughout Oman and the wider GCC. Every unit shipped from our Muscat-based instrumentation division includes full factory documentation, and our technical team supports commissioning, calibration scheduling, and spare parts sourcing so that clients across the Sultanate of Oman receive the same standard of support as Druck’s home markets.

Baker Hughes DPI 705E Measurement Principle

The Baker Hughes DPI 705E uses an internal absolute, gauge, or differential pressure sensor selected at the time of order, with a piezoresistive silicon sensing element that converts applied pressure into a proportional electrical signal. This signal is digitized and temperature-compensated in real time, allowing the instrument to deliver total 1-year uncertainty as low as 0.025% full scale across an operating range of -10°C to 50°C. Optional PM700E external remote pressure sensors extend the range further, from 25 mbar up to 1,400 bar, each carrying its own calibration data so a single DPI 705E indicator can service an entire fleet of remote sensors without recalibration.

Because the sensing technology is fully solid-state, the Baker Hughes DPI 705E requires no warm-up time, draws minimal current from its four AA batteries, and holds calibration stability over long field deployments. The practical result for a maintenance technician is a device that can be switched on and used immediately, that survives repeated drops and vibration per MIL-PRF-28800F Class II requirements, and that eliminates the mechanical wear associated with dead-weight testers or analog gauges used for the same verification tasks.

Engineering Design of the Baker Hughes Druck DPI 705E

The Baker Hughes Druck DPI 705E is housed in a compact, single-handed enclosure measuring 200 x 95 x 43 mm and weighing 563 g, engineered to IP54 sealing so it tolerates dust and splash exposure on refinery walkways and offshore platforms alike. The 16 mm high-contrast LCD with backlight remains legible in direct sunlight or dim plant rooms, and the instrument features an integral desk stand and hanging strap for hands-free bench or field use. Pressure connections are available in G1/8, G1/4, NPT, and Quick-Fit variants to match existing test point hardware without adapters.

Onboard functions include a user-selectable 1, 3, or 5-minute leak test with live countdown, maximum/minimum peak-hold capture, tare and zero correction, a rolling-average filter for noisy readings, and user-adjustable high/low alarms with audible and visual warning. An optional RTD interface accepts PT100 probes for combined pressure and temperature verification from a single handheld unit. A Hazardous Area (Intrinsically Safe) variant, the DPI 705E-IS, is certified to ATEX, IECEx, and CSA standards for use in classified zones, and the instrument integrates directly with Druck’s 4sight2 software for automated calibration record-keeping.

Baker Hughes DPI 705E Key Features

The Baker Hughes Druck DPI 705E pairs metrology-grade accuracy with the practical durability that Oman’s oil, gas, and desalination sectors demand:

• Delivers 41 internal pressure ranges from ±25 mbar to 1,400 bar, covering the full spectrum of gauge, absolute, and differential measurement tasks with a single instrument.
• Achieves total 1-year uncertainty down to 0.025% full scale, meeting the accuracy demands of calibration laboratories and ISO 17025 workflows.
• Operates instantly with no warm-up period, saving technicians measurable time during multi-point field calibration rounds.
• Provides an integral calibration record with a due-date countdown so plant reliability teams can track recertification without a separate asset register.
• Includes 1, 3, and 5-minute leak test functions that record pressure or temperature decay for system integrity checks.
• Supports optional plug-and-play PM700E remote sensors, each carrying independent calibration data for multi-sensor fleets.
• Is rated to IP54 and MIL-PRF-28800F Class II shock and vibration standards for reliable use in harsh industrial environments.
• Is available as the DPI 705E-IS Hazardous Area variant, ATEX and IECEx certified for classified Zone 0 and Zone 1 installations.

Baker Hughes DPI 705E Industrial Applications

The Baker Hughes DPI 705E is deployed wherever pressure instrumentation must be verified against a trusted reference: calibration laboratories checking transmitters and switches, offshore and onshore oil and gas facilities validating wellhead and pipeline instrumentation, and power generation plants confirming boiler and steam system pressures. Its combination of portability and laboratory-level accuracy also makes it the preferred field tool for HVAC and building-services technicians commissioning chilled water and compressed air systems in commercial and hospitality developments across the region.

As the officially authorized partner for Baker Hughes, Seven Star LLC distributes the DPI 705E to instrumentation and calibration teams throughout Muscat, the Sohar and Salalah economic zones, and neighboring GCC markets including the UAE, Saudi Arabia, and Qatar. Our regional stock holding and calibration support network mean clients receive genuine Druck hardware with full manufacturer traceability, backed by local technical assistance rather than a distant overseas supplier.

Technical Specifications

Key specifications for the Baker Hughes DPI 705E precision pressure indicator are summarized below.

Request a Quote for Baker Hughes Druck DPI 705E Precision Pressure Indicator

For the Baker Hughes DPI 705E, Seven Star LLC supports formal RFQ submissions, maintains regional warehouse stock, and provides full technical datasheets for the Baker Hughes Druck DPI 705E on request. Contact our instrumentation division to configure the correct pressure range, accuracy class, and fitting for your application, or to arrange calibration support for an existing fleet of Druck indicators. As the authorized partner for Baker Hughes in Oman and the GCC, Seven Star LLC is your trusted local source for genuine Druck pressure calibration equipment, backed by warranty and regional technical support.

Related Products

• Foxboro IMV30 Multivariable Transmitter
• Danfoss MBS 5100 Pressure Transmitter
• ABB-Absolute pressure transmitter with remote diaphragm seal PAD100
• JUMO dTRANS p31 Hygienic Pressure Transmitter
• PRESSURE SWITCH H100-361United Electric, USA
• Endress+Hauser 5P5B80-BDEBADAAFBLL2BEA Flange-Mount Pressure Transmitter