- Automation & ControlView all 2,760 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Weidmüller
Weidmuller 1478200000 PRO MAX3 960W 24V 40A Power Supply
Description
Weidmuller Weidmüller 1478200000 PRO MAX3 960W 24V 40A overview
Weidmuller Weidmüller 1478200000 is the order number of the PRO MAX3 960W 24V 40A, catalogued as: Power supply, switch-mode power supply unit, 24 V. This page summarises what the manufacturer data sheet states for Weidmüller 1478200000, so that engineers and buyers in Oman and the GCC can check the main parameters before sending a request for quotation. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer, so every figure below is taken from the published data sheet and should be confirmed against the current document for your project.
The PROmax range is aimed at demanding automation tasks. According to the maker, these durable high-performance switch-mode units cope with continuous overload of up to 20 percent as well as short-term peak loads of 300 percent that can appear at high cabinet temperatures, with a high boost capability and full power across a wide temperature range. They are designed for worldwide use, have a small width for tight cabinets, and can be combined with DC UPS units, diode modules or capacitor modules to build a tailored supply concept.
Key features of 1478200000
The data sheet for 1478200000 lists the following headline characteristics for the PRO MAX3 960W 24V 40A.
- Nominal output of 960 W at 24 V DC ± 1 %.
- Input range 3 x 320…3 x 575 V AC / 2 x 360…2 x 575 V AC.
- Efficiency stated as 93.5%.
- Protection degree IP20 with housing: Metal, corrosion resistant.
- Operating temperature -25 °C…70 °C.
- Parallel connection option: yes, max. 3.
- Width 140 mm, depth 150 mm, height 130 mm.
- Short-circuit, overload and over-temperature protection are listed as: short-circuit.
Technical specifications for 1478200000
The table collects the values printed in the manufacturer data sheet. Values that are not printed there are intentionally left out rather than estimated. The GTIN printed for 1478200000 is 4050118286076.
| Parameter | Value |
|---|---|
| Order No. | 1478200000 |
| Type | PRO MAX3 960W 24V 40A |
| Version | Power supply, switch-mode power supply unit, 24 V |
| GTIN (EAN) | 4050118286076 |
| Output power | 960 W |
| Rated output voltage | 24 V DC ± 1 % |
| Output voltage, min. | 22.5 V |
| Output voltage, max. | 29.5 V |
| Nominal output current for Unom | 40 A @ 60 °C |
| Rated input voltage | 3x 400…3x 500 V AC (wide-range input) |
| AC input voltage range | 3 x 320…3 x 575 V AC / 2 x 360…2 x 575 V AC |
| DC input voltage range | 450…800 V DC |
| Frequency range AC | 45…65 Hz |
| Inrush current | max. 25 A |
| Degree of efficiency | 93.5% |
| AC failure bridging time @ Inom | min. 20 ms |
| Parallel connection option | yes, max. 3 |
| Short-circuit protection | Yes |
| Protection against inverse voltage | Yes |
| Residual ripple, breaking spikes | <50 mVss @ UNenn, Full Load |
| Connection system | Screw connection |
| Protection degree | IP20 |
| Protection class | I, with PE connection |
| Housing version | Metal, corrosion resistant |
| Width | 140 mm |
| Height | 130 mm |
| Depth | 150 mm |
| Net weight | 3400 g |
| Operating temperature | -25 °C…70 °C |
| Storage temperature | -40 °C…85 °C |
| Insulation voltage, input/output | 4 kV |
| Surge voltage category | III |
| Tightening torque, max. | 0.6 Nm |
| Certificate No. (cURus) | E255651 |
| Certificate no. (cULus) | E258476 |
| Certificate no. (cULusEX) | E470829 |
Input and output figures should be read together with the derating information in the data sheet. For 1478200000 the nominal output is 960 W at 24 V DC ± 1 %, and the output current is given as 40 A @ 60 °C. A panel designer normally compares the continuous load of all connected devices, adds the inrush of any capacitive or motor-driven loads, and leaves headroom so that the supply does not operate at the limit of its rating at the highest cabinet temperature. The data sheet contains a derating curve, and that curve rather than the nominal value should be used when the cabinet is hot, as is common in Gulf summer conditions.
Typical applications of 1478200000 in Oman and the GCC
A DIN rail supply such as 1478200000 is used wherever 24 V DC or another low-voltage rail is needed for controllers, I/O, instruments and communication hardware. In oil and gas facilities it powers remote terminal units, marshalling cabinets and analyser shelters. In utilities and water treatment it feeds PLC panels at pumping stations, desalination skids and substations. In manufacturing it supplies machine control cabinets, conveyor drives interfaces and packaging lines. Operators of ageing plants in Oman also look for the exact order number when a failed unit has to be replaced during a short shutdown window.
Selection and compatibility notes for 1478200000
When selecting 1478200000, confirm the supply network first: the rated input voltage is stated as 3x 400…3x 500 V AC (wide-range input) and the AC range as 3 x 320…3 x 575 V AC / 2 x 360…2 x 575 V AC. Check the available space against the dimensions of 140 mm width, 130 mm height and 150 mm depth, and confirm that the connection system (Screw connection) fits your wiring standard. If your plan includes redundancy, check the parallel connection entry and use external diode or redundancy modules as recommended in the maker literature. Where the data sheet lists an alternative product for 1478200000, compare terminals, width and output rating before treating it as a drop-in replacement, because mounting depth and wiring may differ between generations.
Installation and commissioning of 1478200000
Mount 1478200000 on a TS 35 rail in the orientation given in the data sheet and keep the ventilation clearances recommended by the maker so that the housing can dissipate its power loss. Connect the protective earth first, use conductors within the cross-section range printed in the data sheet, and tighten the terminals to the stated torque. Protect the input with the recommended back-up fuse or breaker, set the output voltage with the adjustment potentiometer if the data sheet provides one, and check the status LED and any signalling contact before loading the supply. Measure the output under load after commissioning and record the value for later maintenance comparison.
Maintenance and spare part planning for 1478200000
For long service life keep dust and conductive deposits away from the vents and terminals, re-tighten terminals during planned shutdowns, and compare output or switching behaviour with the commissioning record. Because 1478200000 may be requested as a spare for a running installation, keeping one unit in a clean, dry store with its paperwork can shorten outage time. Record the order number 1478200000 and the type PRO MAX3 960W 24V 40A on the panel drawing so that the right item is requested when it must be replaced.
Related products and ordering notes for 1478200000
Other members of the same product family differ in output rating, width, input system and approvals, so the order number is the only safe way to identify the exact item. Quote 1478200000 together with the type PRO MAX3 960W 24V 40A when you contact us. We can also help with related rail accessories, end brackets, redundancy or buffer modules and neighbouring ratings when you are reviewing a whole panel. Lead time and availability are confirmed per request, and no price is shown on this page.
Frequently asked points about 1478200000
- What is 1478200000? It is the order number of the PRO MAX3 960W 24V 40A.
- Which family does it belong to? The PROmax range is aimed at demanding automation tasks.
- Where are the dimensions? Width 140 mm, height 130 mm, depth 150 mm as printed in the data sheet.
- How do I order? Send the RFQ with the part number 1478200000 and the required quantity.
Documents and quotation
The manufacturer data sheet for 1478200000 contains the full parameter list, approvals, derating information and accessory suggestions, and we can supply a copy of the data sheet with the quotation. To request a quotation, send your RFQ with the part number 1478200000, the type PRO MAX3 960W 24V 40A and the quantity you need, plus your delivery location in Oman or the GCC. Please state if you need the exact catalogue number only or if an alternative is acceptable.
Datasheets & Documents
- Datasheet PRO MAX3 960W 24V 40A Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Weidmüller is a German family-owned maker of electrical connection and industrial electronics products, headquartered in Detmold. The company dates from 1850 and was re-established in Detmold in 1948; it specialised in terminal blocks from the 1940s onward. Weidmüller makes Klippon terminal blocks, power supplies, remote I/O and enclosures, and reported over one billion euros in revenue in 2023.
Seven Star LLC lists Weidmüller PRO MAX power supplies and SAK terminal blocks, and supplies Weidmüller components to panel shops and plants in Oman and the GCC.
Weidmüller company profile
| Founded | 1850, Germany |
|---|---|
| Headquarters | Detmold, Germany (since 1948) |
| Ownership | Family-owned |
| Revenue | Over €1 billion (2023) |
| Product families | Klippon Connect terminal blocks, PRO MAX and PRO TOP power supplies, u-remote I/O and fieldbus couplers, Klippon enclosures, connectors and tools |
Milestones
- 1850: Weidmüller is founded.
- 1948: The company is re-established in Detmold.
Weidmüller products listed here
The listed power supplies are DIN rail switch-mode units with 24 V DC output: a PRO MAX single-phase unit rated 180 W and 7.5 A (85 to 277 V AC input), and a PRO MAX3 three-phase unit rated 240 W and 10 A (320 to 575 V AC input). The SAK series is the screw clamp feed-through terminal block family found in many existing panels. Weidmüller now flags several SAK types as being phased out and names a replacement for some of them.
Weidmüller products we list
Ordering Weidmüller parts: what we need
Weidmüller identifies every item by a ten-digit order number, and that number is the surest way to quote. Without it, send the type printed on the part. For power supplies add input voltage and phases, output voltage and current. For terminal blocks add the conductor cross-section, color, and the end plates, cross-connections and markers you need, since accessories are specific to each series.
Facts checked against Weidmüller milestone lists and distributor profiles, October 2026.
Browse Weidmüller products by category: Electrical & Power Modules.
FAQ
Questions about the Weidmuller 1478200000 PRO MAX3 960W 24V 40A Power
Answers from our engineering team on installation, compatibility and integration.
01What is Weidmuller 1478200000?
1478200000 is the order number of the PRO MAX3 960W 24V 40A, catalogued by the manufacturer as: Power supply, switch-mode power supply unit, 24 V.
02What are the main ratings of 1478200000?
The data sheet lists 960 W at 24 V DC ± 1 % with input 3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC.
03What are the dimensions of 1478200000?
The data sheet gives width 140 mm, height 130 mm and depth 150 mm, mounted on a TS 35 rail.
04Is 1478200000 still available from the manufacturer?
The data sheet shows no discontinuation note for 1478200000; availability should still be confirmed per RFQ.
05How do I request a quote for 1478200000?
Send an RFQ to Seven Star LLC with the part number 1478200000 and the quantity. We are an independent supplier and not affiliated with the manufacturer.


















Reviews
There are no reviews yet.