Spirax Sarco SRV66 Sanitary Pressure Reducing Valve
Overview
Spirax Sarco SRV66 Sanitary Pressure Reducing Valve is an angle-pattern, self-draining pressure regulator built entirely from 316L stainless steel for use on clean steam, water, and inert industrial gases. It requires no external pressure sensing line, simplifying installation while delivering stable downstream pressure control across a wide turndown range, and its clean-in-place (CIP) and sterilise-in-place (SIP) capability makes it a natural fit for hygienic process utilities where product contact surfaces must withstand repeated automated cleaning cycles without disassembly.
With fast quotation turnaround and technical support, Seven Star LLC proudly supplies the Spirax Sarco SRV66 to pharmaceutical manufacturers, hospitals, and biotechnology facilities across the Sultanate of Oman and the wider GCC. Valves for Muscat, Sohar, or Salalah are supplied on request with manufacturer documentation, including EN10204 3.1 documentation where specified – giving regional engineering teams a dependable route to clean steam hardware, with lead time confirmed at quotation.
Operating Principle of the Spirax Sarco SRV66
The SRV66 is a direct-acting, spring-loaded pressure reducing valve. Downstream pressure acts on a diaphragm connected directly to the valve plug; as demand and pressure fluctuate, the diaphragm repositions the plug to throttle flow and hold outlet pressure within the selected spring range, all without an external sensing line to the pipeline. Three interchangeable spring ranges – 0.3 to 1.1 bar g, 0.8 to 2.5 bar g, and 1.0 to 5.0 bar g – allow one valve body to be configured for the exact downstream setpoint an application requires, and the maximum permitted outlet pressure is capped at 1.5 times the maximum set pressure for safety margin.
Because the wetted internals, diaphragm plate, and body are all 316L stainless steel (with the option of 1.4435 on key wetted parts for higher corrosion resistance), and the standard internal surface finish is Ra < 3.2 μm – improvable to Ra ≤ 0.25 μm on the polished option – the valve resists product build-up and supports the crevice-free, self-draining geometry demanded by clean steam and pure steam applications. The practical consequence for the plant engineer is a pressure regulator that can be CIP/SIP cycled in place, holds tight shut-off per EN 60534-4, and avoids the microbial harbourage risk that plagues valves not designed for hygienic service.
Engineering Design of the Spirax Sarco SRV66
Physically, the Spirax Sarco SRV66 is built around a compact spring housing mounted directly above the valve body, connected by a stainless steel ‘V’ band clamp that allows fast tool-free access for maintenance kit replacement. Spirax Sarco specifies that the valve must always be installed with the inlet vertical and the spring housing directly above the body, and explicitly warns against insulating the valve, since trapped heat can degrade the FPM/Viton or PTFE diaphragm and seal materials over time.
Sanitary clamp compatible connections are standard across DN15 to DN50 (½” to 2″), with ASME BPE clamps, ASME or JIS flanges, DIN32676 clamps, and aseptic connections available on request, giving process engineers flexibility when matching the valve into an existing hygienic pipework standard. Optional certification packages – FDA USP Class VI 121°C approval, silicone-free and oil-free build, and surface roughness certificates – extend the valve’s suitability into the most stringent pharmaceutical and biotech qualification environments without requiring a different product line.
Key Features
The Spirax Sarco SRV66 combines hygienic construction with practical field serviceability. Facility engineers selecting the Spirax Sarco SRV66 for a new clean utility build benefit from the following core capabilities:
- All-316L stainless steel wetted parts eliminate corrosion and contamination risk in clean steam and pharmaceutical water systems.
- Self-draining, crevice-free body geometry supports full CIP and SIP cycling without disassembly.
- Direct-acting diaphragm design requires no external pressure sensing line, reducing installation points and potential leak paths.
- Three interchangeable spring ranges (0.3–1.1, 0.8–2.5, and 1.0–5.0 bar g) cover the majority of clean utility pressure setpoints from a single body.
- Sanitary clamp connections from DN15 to DN50 (½” to 2″) with ASME BPE, DIN32676, and aseptic options for direct integration into existing hygienic pipework.
- Optional polished internal finish down to Ra ≤ 0.25 μm for superclean pharmaceutical and food-grade applications.
- FDA USP Class VI 121°C, silicone-free, oil-free, and ADI-free certification options available for regulated process validation.
- Tool-free ‘V’ band clamp access to the diaphragm and ‘O’ ring maintenance kit minimises downtime during scheduled servicing.
Industrial Applications
The Spirax Sarco SRV66 is specified wherever clean steam, purified water, or inert gas must be delivered at a precisely controlled, contamination-free pressure. Typical duties include supply to bioreactors, centrifuges, freeze dryers, sterilisers, autoclaves, process tanks, humidifiers, and culinary steam equipment – applications common across pharmaceutical manufacturing, hospital central sterile supply departments, and biotechnology production suites throughout the region.
With engineering support in Muscat, Seven Star LLC supplies the SRV66 to hospital groups, pharmaceutical plants, and process facilities across Muscat, Sohar, and the Salalah free zone, as well as wider GCC markets where clean steam infrastructure underpins sterile processing and injectable water systems. Regional engineering teams specifying clean steam pressure control for a new sterile fill line or upgrading legacy autoclave feeds can rely on Seven Star LLC for genuine Spirax Sarco hardware, local technical support, and documentation packages that satisfy GMP and hospital procurement audit requirements.
Technical Specifications
The table below summarizes the core specifications of the Spirax Sarco SRV66 sanitary pressure reducing valve, including sizes, materials, and pressure ratings relevant to Spirax Sarco SRV66 selection for your project.
| Parameter | Specification |
|---|---|
| Model | Spirax Sarco SRV66 (SRV66HC high capacity variant also available) |
| Body material | 316L stainless steel (1.4404), optional 1.4435 on wetted parts |
| Design | Angle pattern, self-draining, direct-acting diaphragm |
| Sizes | DN15, DN20, DN25, DN32, DN40, DN50 (½” to 2″) |
| Connections | Sanitary clamp compatible; ASME BPE, DIN32676, aseptic, ASME/JIS flanges on request |
| Spring ranges | 0.3–1.1 bar g / 0.8–2.5 bar g / 1.0–5.0 bar g |
| Maximum design pressure | 9.5 bar g @ 50°C |
| Maximum design temperature | 300°C @ 5.8 bar g |
| Maximum operating temperature | 180°C |
| Maximum operating pressure (inlet) | 8 bar g |
| Standard surface finish | Ra < 3.2 μm (polished option to Ra ≤ 0.25 μm) |
| Diaphragm / seal material | FPM (Viton) / PTFE, optional Viton FEPM soft seat |
| Certification options | EN10204 3.1, FDA USP Class VI 121°C, surface roughness certificate |
| Media | Clean steam, water, inert industrial gases |
Request a Quote for Spirax Sarco SRV66 Sanitary Pressure Reducing Valve
Seven Star LLC is ready to support your clean steam pressure control specification with Spirax Sarco SRV66 valves supplied and quoted on request. Submit a formal RFQ for pricing and lead times, request the full technical datasheet for CIP/SIP validation documentation, or contact our instrumentation division directly to discuss sizing for your bioreactor, steriliser, or autoclave feed. Backed by genuine manufacturer documentation, Seven Star LLC delivers genuine hardware, manufacturer traceability, and dedicated local technical support for every clean steam project.
Related Products
- Datasheet Spirax Sarco SRV66 Sanitary Pressure Reducing Valve Datasheet Download
Spirax Sarco products listed here
Three groups make up the listing:- Clean steam and hygienic equipment: the CSG-HS clean steam generator, STERI-TROL clean service control valve, SRV66 sanitary pressure reducing valve, SVL488 clean service safety valve and the BT6-B balanced pressure thermostatic steam trap
- Isolation valves: BSA and BSAT bellows sealed stop valves, the BSA3HP high pressure version, A3S and A3SS valves and the DBB3 double block and bleed valve
- Steam metering: ILVA variable area flowmeter and the TVA and TFA target flowmeters
Where Spirax Sarco steam equipment is used
Plant steam systems in refineries, chemical plants, laundries and food production use Spirax Sarco steam traps, stop valves and flowmeters for distribution and energy accounting. Clean steam products serve sterilizers, bioreactors, pharmaceutical water systems and food contact processes, where stainless steel wetted parts and documented surface finish are required. Requests from the GCC are often for a like-for-like trap or valve on an existing line.Ordering Spirax Sarco parts: what we need
Give the product type (for example BSA3T or BT6-B), nominal size, end connection and its standard (flanged PN or ASME class, screwed, butt weld or sanitary clamp), body material and the operating pressure and temperature. For steam traps add the condensate load and differential pressure. For Spirax Sarco flowmeters send line size, steam pressure and the flow range, plus the display or flow computer required. On clean steam items, state the surface finish and the material certificates you need. A nameplate photo helps where the type is not known.Browse Spirax Sarco products by category: Clean Steam, Globe Valve, Flowmeters.
Reviews
There are no reviews yet.