Brand:

Rotork IB4 Multi-Turn Bevel Gearbox, 678 Nm

Description

Rotork IB4 overview

Rotork IB4 is the smallest multi-ratio bevel gearbox in the IB multi-turn line. Every other IB size above it, from IB5 to IB14, is a bigger version of the same idea: a right-angle gear stage that lets an electric actuator stand beside a rising stem instead of on top of it. What makes IB4 interesting is the ratio spread. It is offered at 2:1, 3:1, 4:1 and 6:1, with a published output of 306 Nm at 2:1, 678 Nm at both 3:1 and 4:1, and 542 Nm at 6:1, all with a thrust ceiling of 53 kN.

IB4 key features

  • Four ratios from one casting: 2:1, 3:1, 4:1 and 6:1
  • Weight of only 16 kg, the lightest multi-ratio unit in the series
  • Output flange F10, with F10 and F14 input flange choices
  • Keyed bore up to 40 mm, or an Acme thread up to 1 3/4 inch (45 mm)
  • Dual shaft bevel can be ordered at 90 or 180 degrees on this size
  • Removable output sleeve in Form A, B or C for spindle machining

IB4 technical specifications

Specification Value for IB4
Designation IB multi-turn bevel gearbox
Ratio choices 2:1, 3:1, 4:1 and 6:1
Torque limit at output 678 Nm (static safety factor 2)
Peak stem thrust 53 kN
Key bore limit (BS4235) 40 mm
Acme thread limit 1 3/4 inch (45 mm)
Unit weight 16 kg
Size A and A1 124 mm / 107 mm
Size B and C 228 mm / 51 mm
Size D (diameter) and E 125 mm / 3 mm
Size G (diameter) and I 202 mm / 74 mm
J tube or plug detail 2.5 inch BSP or NPT
Actuator-side flange choices F10 and F14
Valve-side flange choices F10
Sealing IP67 standard, IP68 option
Ambient range -40 to +120 degrees C (normal range)
Lubrication Renolit CL-X2 grease

Ratio selection matters more than most buyers expect. For the IB4 the published selection chart reads as follows: 2:1 ratio gives 306 Nm at a mechanical advantage of 1.70; 3:1 ratio gives 678 Nm at a mechanical advantage of 2.55; 4:1 ratio gives 678 Nm at a mechanical advantage of 3.40; 6:1 ratio gives 542 Nm at a mechanical advantage of 5.10. Mechanical advantage is quoted with a tolerance of about plus or minus 10 percent and is reached after a few operating cycles, so allow for that run-in period when you calculate hand-wheel effort for manual override.

How IB4 differs from other IB variants

Within the IB range, the IB4 is shown 678 Nm, 53 kN thrust, a 40 mm bore and 16 kg. By comparison, the next size down, IB3, tops out at 306 Nm with 177 kN thrust, a 52 mm bore and about 25 kg while the next size up, IB5, is rated 678 Nm with 177 kN thrust, a 52 mm bore and about 20 kg. Torque rises in steps across the series (306, 678, 1,355, 2,033, 4,067 and 8,135 Nm), whereas thrust capacity climbs separately from 53 kN up to 1,320 kN, which is why two sizes can share the same torque figure and still not be interchangeable. If your valve stem load is the limiting number, read the thrust column first and only then the torque column.

Typical applications in Oman and the GCC

Because IB4 is compact, it tends to appear on mid-size gate and globe valves where stem loads stay below 53 kN, for example chilled-water isolation in district cooling plants, cooling-tower headers, fire-water ring-main gates and process block valves in refineries and gas plants across Oman and the Gulf. It also suits penstock and sluice gates in irrigation channels where a modest thrust is enough and the actuator has to stand clear of the water.

Selection and compatibility notes for IB4

Start with the ratio, since it decides everything else. At 2:1 the gear unit gives a mechanical advantage of 1.70 and a rating of 306 Nm; at 3:1 the advantage is 2.55 and the rating jumps to 678 Nm; at 4:1 the advantage is 3.40 with the same 678 Nm; and at 6:1 the advantage reaches 5.10 but the rating falls to 542 Nm. Then confirm the stem fits a 40 mm key bore, that the valve flange is F10, and that the actuator output matches F10 or F14 on the input side. Because the output flange option is F10 only, a valve with an F14 top works needs a different size.

Installation and commissioning

Slide the output sleeve over the valve stem, seat the base on the valve flange and bolt it down. With dimension A at 124 mm and A1 at 107 mm the envelope is compact, so check clearance to the actuator hand-wheel before drilling anything. The overall height B is 228 mm with a 51 mm dimension C, and the base diameter is 125 mm and dimension E is 3 mm. Fit the actuator on the input flange, close the 2.5 inch BSP or NPT tube mounting detail with a plug or tube, and cycle the valve by hand before applying power.

Maintenance and service life

Inspect IB4 whenever the valve is cycled: look for grease at the seals, check the output sleeve is not walking, and check that the input flange studs are tight. The unit is sealed for life, so there is nothing to refill. If the stem changes, a new sleeve can be fitted.

Ordering notes and FAQ summary for IB4

When you request a quotation for this gearbox, give the ratio, the actuator make and flange, the valve stem diameter or thread, the output flange standard, the ambient temperature and whether IP68, firesafe or a dual shaft layout is required. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

  • What is the peak output torque of the Rotork IB4? The published selection chart for the IB4 gives 678 Nm at the output, with a static safety factor of 2 on torque and a peak thrust of 53 kN.
  • Which gear ratios does the IB4 offer? Ratios available are 2:1, 3:1, 4:1 and 6:1. Mechanical advantage values quoted for this size run from 1.70 to 5.10 with a tolerance of roughly 10 percent.
  • What stem bore can the IB4 accept? The IB4 accepts a rectangular-key bore of up to 40 mm and an Acme thread of up to 1 3/4 inch (45 mm), based on the sizing data in the data sheet.
  • What flange options are shown for the IB4? Input flange alternatives are F10 and F14 and output flange choices are F10, drilled to ISO 5210 as standard, with MSS or DIN equivalents on request.
  • What enclosure rating does the IB4 have? The standard enclosure is IP67 for submersion to 1 metre for 30 minutes, and an IP68 option covers continuous submersion to 15 metres. State IP68 in the RFQ for the IB4.

Documents and quotation

The manufacturer publishes the IB multi-turn gear drive datasheet that covers the IB4; a copy is attached to this page as the datasheet. To obtain a quotation, send an RFQ with part number IB4, the quantity, the actuator or valve it must fit and your delivery location in Oman or the GCC, and we will reply with availability and lead time.

Datasheets & Documents
  • PDF Datasheet Rotork IB4 Multi-Turn Bevel Gearbox, 678 Nm Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Rotork is a British flow control company best known for electric valve actuators. Jeremy Fry founded Rotork Engineering Company in Bath in 1957, the year its first actuator, the 100A, went on sale, and the group is still headquartered in Bath and listed on the London Stock Exchange. Today Rotork makes electric, pneumatic, hydraulic and electro-hydraulic actuators, gearboxes, precision regulators and valve positioners.

Seven Star LLC is an independent supplier listing Rotork actuators, Rotork Fairchild regulators, YTC positioners and spare parts for buyers in Oman and the GCC. Replacement units are matched from the actuator nameplate and wiring diagram number.

Rotork company profile

Origin Founded by Jeremy Fry in 1957 in Bath, England; first product the 100A valve actuator
Headquarters Brassmill Lane, Bath, United Kingdom
Ownership Rotork plc, a public company listed on the London Stock Exchange
Acquired brands Fairchild precision pneumatic controls (2011, Winston-Salem, USA), YTC valve positioners (Young Tech Co., Seoul, 2014), Mastergear gearboxes (2016)
Product families Intelligent electric actuators, control valve actuators, electro-hydraulic and fluid power actuators, gearboxes, precision regulators, positioners and network control systems

Milestones

  • 1957: Jeremy Fry founds Rotork in Bath, England; the first product is the 100A valve actuator.
  • 2011: Fairchild precision pneumatic controls (Winston-Salem, USA) is acquired.
  • 2014: YTC valve positioners (Young Tech Co., Seoul) is acquired.
  • 2016: Mastergear gearboxes is acquired.

Rotork actuators, regulators and positioners

Series Type Typical use
IQ3 Intelligent multi-turn electric actuator Gate and globe valves, penstocks and sluice gates; non-intrusive setup with a Bluetooth setting tool, double-sealed enclosure, data logging
IQT3 Intelligent part-turn electric actuator Ball, butterfly and plug valves and dampers, with the same setup and diagnostics as IQ3
CVA Precision control valve electric actuator Continuous modulating control of linear and part-turn control valves where instrument air is not available
CMA Compact modulating electric actuator Small control valves, chemical injection and metering pumps
Skilmatic SI3 Self-contained electro-hydraulic actuator Spring-return fail-safe and ESD duty with partial stroke testing, needing only an electrical supply
GP / GH Scotch yoke pneumatic (GP) and hydraulic (GH) actuators Large quarter-turn valves on pipelines and ESD service; spring-return or double-acting
CP Compact pneumatic quarter-turn actuator Smaller on-off ball and butterfly valves on plant air
Fairchild 10, 30, 55, 66, M11, 81 Precision pressure regulators Instrument air to positioners and actuators, test benches; Model 66 in stainless steel for corrosive and offshore sites
Fairchild 1000 No-bleed precision regulator Saves instrument air or gas where continuous bleed is not acceptable
Fairchild 10BP, 4000ABP Back pressure regulators Holding upstream pressure in process and test systems
YTC YT-1000, YT-3300 Valve positioners Electro-pneumatic (YT-1000) and smart HART (YT-3300) positioning of linear and rotary pneumatic actuators

Where Rotork equipment is used

Rotork actuators are common on oil and gas pipelines and terminals, refineries and gas plants, water and wastewater networks, desalination plants and power stations. Electric IQ actuators handle isolation valves on long pipelines and water mains, often networked over Rotork Pakscan, Modbus or another fieldbus. Skilmatic and scotch yoke actuators cover emergency shutdown valves, and Fairchild regulators and YTC positioners sit on pneumatic control valves throughout process plants.

Ordering Rotork actuators and spare parts: what we need

Send photos of the actuator nameplate with the model, serial number and wiring diagram number; the wiring diagram is usually inside the terminal cover. Rotork can identify the original build, including options and control interface, from the serial number. For a new application add the valve type and size, required torque or thrust, operating time, mounting flange (ISO 5210 or ISO 5211), power supply, control signal or network protocol, fail-safe requirement and hazardous-area marking. For regulators and positioners send the full model code and the pressure or signal ranges.

Facts checked against Rotork plc company information and product data, October 2026.

FAQ

Questions about the Rotork IB4 Multi-Turn Bevel Gearbox, 678 Nm

Answers from our engineering team on installation, compatibility and integration.

01What is the maximum output torque of the Rotork IB4?
The published selection chart for the IB4 gives 678 Nm at the output, with a static safety factor of 2 on torque and a maximum thrust of 53 kN.
02Which gear ratios does the IB4 offer?
Ratios available are 2:1, 3:1, 4:1 and 6:1. Mechanical advantage values quoted for this size run from 1.70 to 5.10 with a tolerance of roughly 10 percent.
03What stem bore can the IB4 accept?
The IB4 accepts a rectangular-key bore of up to 40 mm and an Acme thread of up to 1 3/4 inch (45 mm), based on the sizing data in the datasheet.
04What flange options are listed for the IB4?
Input flange options are F10 and F14 and output flange options are F10, drilled to ISO 5210 as standard, with MSS or DIN equivalents on request.
05What enclosure rating does the IB4 have?
The standard enclosure is IP67 for submersion to 1 metre for 30 minutes, and an IP68 option covers continuous submersion to 15 metres. State IP68 in the RFQ for the IB4.