- Automation & ControlView all 2,807 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: ifm
ifm PI2797 Flush Pressure Sensor, -50 to 1000 mbar, IO-Link
Description
ifm PI2797 overview
The ifm PI2797 is a flush-diaphragm pressure sensor with display, measuring minus 50 to 1000 mbar, with G 1 external thread and Aseptoflex Vario sealing contour, for viscous media and liquids with suspended particles. Ordering description: PI-001BREA01-MFRKG/US/ /P.
Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We list this device so that maintenance, procurement and project teams can quote the exact part number against the manufacturer data.
Key features of the PI2797
- Measuring range minus 50 to 1000 mbar.
- Medium temperature minus 25 to 125 degrees Celsius, 145 for max one hour.
- IP 67, IP 68, IP 69K.
- Switching, analogue and IO-Link outputs.
- 20 to 32 V DC supply.
PI2797 technical specifications
| Parameter | Value from the manufacturer datasheet |
|---|---|
| PI-001BREA01-MFRKG/US/ | /P |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 1 |
| Measuring range | -0.05…1 bar -50…1000 mbar -0.73…14.5 psi -5…100 kPa |
| Process connection | threaded connection G 1 external thread with Aseptoflex Vario sealing contour |
| Note | G1 Gewinde nach ISO 228. Alternativ dichtend über rückwärtige |
| Special feature | gold-plated contacts |
| Application | flush mountable for the food and beverage industry |
| Media | viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature [°C] | -25…125; (145 max. 1h) |
| Min. burst pressure | 30000 mbar 435 psi 3000 kPa |
| Pressure rating | 10000 mbar 145 psi 1000 kPa |
| Vacuum resistance | -1000 mbar -0.1 MPa |
| Type of pressure | relative pressure |
| No dead space | yes |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Integrated watchdog | yes |
| Operating voltage [V] | 20…32 DC |
| Current consumption [mA] | 3.6…21 |
| Power-on delay time [s] | 1 |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4…20, invertible; (scalable) |
| Short-circuit protection | yes |
| Overload protection | yes |
| Max. load [Ω] | 300 |
| Switching frequency DC [Hz] | 125 |
| Set point SP | -48…1000 mbar -0.7…14.5 psi -4.8…100 kPa |
| Reset point rP | -50…998 mbar -0.73…14.47 psi -0.5…99.8 kPa |
| Analog start point | -50…750 mbar -0.73…10.88 psi -5…75 kPa |
| Analog end point | 200…1000 mbar 2.9…14.5 psi 20…100 kPa |
| In steps of | 1 mbar 0.01 psi 0.1 kPa |
| Factory setting | SP1 = 250 mbar rP1 = 230 mbar |
| SP2 = 750 mbar | rP2 = 730 mbar |
| ASP = 0 mbar | AEP = 1000 mbar |
| dAP = 0.06 s | dAA = 0.03 s |
| Repeatability [% of the span] | less than ± 0,1; (with temperature fluctuations less than 10 K; Turn down 1:1) |
| Characteristics deviation | less than ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and) |
| point | less than ± 0,05; (0…70 °C) |
| Damping process value dAP [s] | 0…30 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.0 |
All values above are taken from the manufacturer datasheet for the PI2797. Ranges are written with three dots, for example 18…30 means 18 to 30. Where a limit depends on the medium or the installation, the datasheet condition applies.
Typical applications in oil and gas, utilities, water and manufacturing
Viscous media and liquids with suspended particles, which is the media group named in the datasheet, in process lines and tanks.
In Oman and the wider GCC, pressure measurement devices like the PI2797 are found in pump, compressor and hydraulic circuit monitoring. Hot ambient conditions, dust and long cable runs make a sensor with clear local indication and stable outputs valuable, because it shortens fault finding for the shift technician. Check the ambient and medium temperature limits in the table above against the actual site conditions before selecting the device.
Selection and compatibility notes for the PI2797
The datasheet lists the PI1707 as an alternative article. Check technical data before replacing.
When you match this device to an existing loop, compare the supply voltage, output type, connector and process connection with the installed device, and confirm that the control system input accepts the signal. Because the part number identifies one exact version in the family, a similar-looking sibling can differ in output polarity, range or thread, and it is better to quote the exact designation than a family name.
Installation and commissioning
Depressurise and isolate the line before fitting. Use a compatible process connection and seal, tighten to the value shown in the operating instructions, and avoid mounting where pressure spikes or water hammer are present without a damper. Set the switch points or analogue span, and note the units shown on the display.
Before power-up, check the wiring against the connection diagram in the datasheet, and after power-up allow any start-up delay listed in the table to elapse before judging the output. Document the settings made on site together with the serial number so that a replacement can be configured identically.
Maintenance and service
Compare the reading against a calibrated gauge at planned intervals, check the seal and thread for leaks, and keep the connector clean and dry. Replace the sensor if the zero point cannot be restored.
Related products and ordering notes
Related ifm devices already listed in the Seven Star catalogue can be found through the brand page. When you request this device, please state the quantity, the required delivery location and whether a datasheet copy is needed. If the application is critical, tell us the process medium, pressure and temperature so the engineer can check the data before the quotation is prepared.
Frequently asked questions
- What is the ifm PI2797? The ifm PI2797 is a flush-diaphragm pressure sensor with display for viscous media. The ifm PI2797 is a flush-diaphragm pressure sensor with display, measuring minus 50 to 1000 mbar, with G 1 external thread and Aseptoflex Vario sealing contour, for viscous media and liquids with suspended particles.
- What supply and protection rating does the PI2797 have? According to the manufacturer datasheet the PI2797 operates from 20…32 DC and has protection III.
- Is the PI2797 still available from the manufacturer? The manufacturer datasheet does not carry a phase-out or archive notice, but availability changes over time, so ask us to confirm stock and lead time when you send the RFQ.
- Does Seven Star LLC supply the PI2797 in Oman? Yes, Seven Star LLC quotes the PI2797 for projects and maintenance in Oman and the GCC. Send the part number PI2797 and the quantity and we will respond with availability.
- How do I get a quotation for the PI2797? Use the RFQ form on this page with the part number PI2797, the quantity and your delivery location. We will reply with a quotation after checking availability.
Documents and quotation
The manufacturer datasheet is attached to this page where the file is available, and it is the reference for every value shown here. To order, send the RFQ with part number PI2797 and the quantity required, together with the delivery location and any application details. Our team will confirm availability and respond with a quotation.
Datasheets & Documents
- Datasheet ifm PI2797 Flush Pressure Sensor, -50 to 1000 mbar, IO-Link Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.
Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.
ifm company profile
| Founded | 1969, Essen, Germany |
|---|---|
| Founders | Robert Buck and Gerd Marhofer |
| Headquarters | Essen, Germany |
| Ownership | Family-owned |
| Product families | Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters |
Milestones
- 1969: ifm is founded in Essen.
- 2001: The founders' sons take over management.
ifm sensors listed on this page
ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:
- O1D100: laser distance sensor for position and distance measurement
- PN7093: pressure sensor with local display
- NG5021: inductive proximity sensor with NAMUR output
Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.
ifm products we list
Ordering ifm sensors: what we need
Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.
Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.
Browse ifm products by category: Sensors & Transmitters, Pressure Instrumentation.
FAQ
Questions about the ifm PI2797 Flush Pressure Sensor, -50 to 1000 mbar,
Answers from our engineering team on installation, compatibility and integration.
01What is the ifm PI2797?
The ifm PI2797 is a flush-diaphragm pressure sensor with display for viscous media. The ifm PI2797 is a flush-diaphragm pressure sensor with display, measuring minus 50 to 1000 mbar, with G 1 external thread and Aseptoflex Vario sealing contour, for viscous media and liquids with suspended particles.
02What supply and protection rating does the PI2797 have?
According to the manufacturer datasheet the PI2797 operates from 20...32 DC and has protection III.
03Is the PI2797 still available from the manufacturer?
The manufacturer datasheet does not carry a phase-out or archive notice, but availability changes over time, so ask us to confirm stock and lead time when you send the RFQ.
04Does Seven Star LLC supply the PI2797 in Oman?
Yes, Seven Star LLC quotes the PI2797 for projects and maintenance in Oman and the GCC. Send the part number PI2797 and the quantity and we will respond with availability.
05How do I get a quotation for the PI2797?
Use the RFQ form on this page with the part number PI2797, the quantity and your delivery location. We will reply with a quotation after checking availability.


















Reviews
There are no reviews yet.