- Automation & ControlView all 2,467 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: ifm
ifm KQ6005 Capacitive Sensor, 12 mm, IO-Link, Cable with M12
Description
ifm KQ6005 Capacitive Sensor, 12 mm, IO-Link, Cable with M12
The ifm KQ6005 is a compact rectangular capacitive sensor (20 x 14 x 48 mm) with a sensing range of 12 mm, aimed at position detection and level monitoring. It detects dry bulk material and liquids, including through a non-metallic container wall or on a bypass pipe. Sensitivity can be taught by the pushbuttons, an electronic lock prevents accidental changes, and an LED shows the switching state.
The sensor has a PNP output with normally open/normally closed selectable and an IO-Link interface. It connects through a 0.1 m cable ending in an M12 connector and is rated IP65, IP67 and IP69K. Seven Star LLC supplies the KQ6005 in Oman and the GCC as an independent supplier.
KQ6005 technical specifications
The table lists the values published by the manufacturer for the KQ6005. Where a parameter has several operating modes, the headline value is shown; the full parameter list is in the manufacturer documentation.
| Parameter | Specification |
|---|---|
| Manufacturer / part number | ifm electronic / KQ6005 |
| Sensing range [mm] | 12 |
| Dimensions [mm] | 20 x 14 x 48 |
| Mounting | non-flush mountable |
| Media | dry bulk material; liquids |
| Real sensing range Sr [mm] | 12 ± 10 % |
| Hysteresis [% of Sr] | 1 to 15 |
| Operating voltage [V] | 10 to 30 DC |
| Current consumption [mA] | < 17 |
| Electrical design | PNP |
| Output function | normally open / normally closed (selectable) |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 10 |
| Communication interface | IO-Link |
| Ambient temperature [°C] | -25 to 80 |
| Protection | IP 65; IP 67; IP 69K |
| Weight [g] | 34.5 |
| Materials | housing, cover: PBT glass fibre reinforced; pushbuttons: TPE-U |
| Connector | 1 x M12; coding: A; Contacts: 3 |
| Cable | 0.1 m, PVC; 3 x 0.14 mm² |
| MTTF [years] | 725 |
How the KQ6005 works
The KQ6005 is a compact capacitive proximity sensor. Its electrode builds up an electric field in front of the sensing face, and when material with a different dielectric constant enters the field, the capacitance changes and the output switches. This lets the sensor detect liquids and dry bulk material through a non-metallic container wall, or on a bypass pipe, without contact. The sensitivity can be taught through the pushbuttons to ignore the container wall.
Where the KQ6005 fits and related parts
The KQ6005 contrasts with point level sensors such as the LMT100 and LMC510 in that it needs no tank penetration: it is stuck onto the outside of a plastic or glass container. It is also used as a proximity sensor on non-metallic targets. For metal targets, inductive sensors such as the IG5593 or IGS232 are the better choice.
Selection and ordering checklist for the KQ6005
Work through the points below before you confirm the order, so that the KQ6005 you receive is the one your machine or plant needs.
- Check the container wall is non-metallic and thin enough for the 12 mm range
- Check the medium: dry bulk material or liquid
- Plan the mounting adapters and cable ties
- Teach sensitivity with the container empty and full
- Check cable and M12 connection: 0.1 m cable
The manufacturer lists this article under the type designation Capacitive sensor, KQ-3120NFPKG/2T/0,1M/US. The article number KQ6005 is the reference to quote when ordering, and the type designation is useful for technicians who compare the label on an installed unit.
Installation, commissioning and maintenance
Fix the sensor on the container wall with the mounting adapter or cable ties so the sensing face contacts the wall, at the height of the level to be detected. At commissioning, use the teach function with the container empty and then full, check the switching, and lock the settings with the electronic lock. Deposits on the inside wall or condensation can influence the switching, so recheck sensitivity after changes in the product.
Fix the sensor flat against the wall at the switching height and teach it with the container empty and then full; lock the settings. Condensation or product film on the inside of the wall can shift the switching point, so check at the end of a cleaning cycle. Keep the temperature in the -25 to 80 degrees Celsius range.
Typical applications in Oman and the GCC
Level checks in plastic hoppers, sight tubes, water tanks and bypass columns, and detection of non-metallic parts. In Oman and the GCC it is used where tanks are plastic and cannot be drilled.
Non-contact sensors on plastic tanks suit sites where drilling a vessel is not allowed. Heat and condensation on the wall can shift the switching point, so teach the sensor at normal operating conditions.
KQ6005 compared with related ifm types
The table places the KQ6005 next to neighbouring types in the same application group, so you can see whether a sibling would suit the job better.
| Part number | Key characteristics | Note |
|---|---|---|
| KQ6005 | Capacitive, 12 mm, IO-Link, 20x14x48 | This page |
| LMC510 | Capacitive, oil preset, 1/2 NPT, 2 outputs | Related type |
| IG5593 | M18 flush, 5 mm, 2-wire, 10-55 V DC, cable | Related type |
| IGS232 | M18 flush, 8 mm, -40 to 85 C, IP69K | Related type |
Information to send with an RFQ for the KQ6005
To prepare an accurate offer for the KQ6005, please include the following with your enquiry:
- Container material and wall thickness
- Medium to be detected
- Mounting position and space
- Output polarity and cordset
- Quantity and delivery location
Documents and quotation
No datasheet is attached to this page. Send us the part number KQ6005 and we will confirm which documents are available, such as the datasheet and operating instructions, and for IO-Link devices the device description file.
Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC and is not affiliated with the manufacturer; the name ifm is used only to identify the product. Prices are not shown on the page, so send the part number, the quantity and the delivery location to receive a quotation.
Datasheets & Documents
- Datasheet ifm KQ6005 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
ifm is a German family-owned maker of sensors and automation products, founded in Essen in October 1969 by Robert Buck and Gerd Marhofer. Its first products were inductive proximity sensors sold under the efector name. ifm is still headquartered in Essen, and the founders' sons, Martin Buck and Michael Marhofer, have led it since 2001.
Seven Star LLC lists ifm position, distance and pressure sensors and supplies them by exact article number to plants and machine builders in Oman and the wider Gulf region.
ifm company profile
| Founded | 1969, Essen, Germany |
|---|---|
| Founders | Robert Buck and Gerd Marhofer |
| Headquarters | Essen, Germany |
| Ownership | Family-owned |
| Product families | Inductive and capacitive proximity sensors, PN pressure sensors, O1D laser distance sensors, flow and level sensors, IO-Link masters |
Milestones
- 1969: ifm is founded in Essen.
- 2001: The founders' sons take over management.
ifm sensors listed on this page
ifm identifies every device with a short article number, and that number is what we order against. Three are listed here:
- O1D100: laser distance sensor for position and distance measurement
- PN7093: pressure sensor with local display
- NG5021: inductive proximity sensor with NAMUR output
Other ifm inductive sensors, pressure sensors and connection cables can be quoted on request when you send the article number.
ifm products we list
Ordering ifm sensors: what we need
Send the six-character article number printed on the housing (two letters and four digits, or similar). If the label is worn, a photo plus the thread size, sensing range, output type and connector style is enough for us to check the part against ifm documentation. For NAMUR sensors, tell us which isolating amplifier is in the loop. Buyers in the GCC who need a successor for a discontinued article can send the old number and we will check the replacement the manufacturer names.
Facts checked against ifm's own 50-year chronicle (ifm.com), October 2026.
Browse ifm products by category: Sensors & Transmitters, Pressure Instrumentation.
FAQ
Questions about the ifm KQ6005 Capacitive Sensor, 12 mm, IO-Link, Cable
Answers from our engineering team on installation, compatibility and integration.
01What is the sensing range of the ifm KQ6005?
12 mm. This is the value published by the manufacturer for the KQ6005; confirm details before ordering.
02Can the KQ6005 detect through a container wall?
Yes, it detects through a non-metallic container wall or on a bypass pipe.
03How is the KQ6005 taught?
With the pushbuttons on the housing, with an electronic lock for the settings.
04What protection does the KQ6005 have?
IP65, IP67 and IP69K. This is the value published by the manufacturer for the KQ6005; confirm details before ordering.
05Does the KQ6005 have IO-Link?
Yes. This is the value published by the manufacturer for the KQ6005; confirm details before ordering.


















Reviews
There are no reviews yet.