Brand:

Festo MS6-LFR-3/8-D6-ERM-E11 Filter Regulator

Description

MS6-LFR-3/8-D6-ERM-E11: MS6 filter regulator with 40 µm filtration

The Festo MS6-LFR-3/8-D6-ERM-E11 (article 8190247) is a compressed-air filter regulator of the MS series, size 6, with G3/8 ports. It cleans the air, drains condensate and holds a set outlet pressure in a single housing. Seven Star LLC supplies MS6-LFR-3/8-D6-ERM-E11 in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer. The notes below turn the manufacturer data sheet into practical selection advice.

How to read the part number against the datasheet:

  • MS6 is the series and size shown on the datasheet (series MS, size 6).
  • LFR stands for filter regulator, meaning the filter and the pressure regulator share one housing.
  • 3/8 in the code matches the G3/8 port thread listed for both ports.
  • The remaining letters select options such as regulation range, filter element, drain, gauge and housing. In the datasheets reviewed for this page, codes containing C show a 5 µm element and codes containing E show 40 µm; always confirm the actual values against the sheet for article 8190247.
  • This version: filter grade 40 µm, condensate drain manual, rotating, a pressure gauge is fitted.

MS6-LFR-3/8-D6-ERM-E11 technical specifications

Values in the table are taken from the manufacturer data sheet for article 8190247.

Parameter Specification
Manufacturer / part number Festo / MS6-LFR-3/8-D6-ERM-E11
Article number 8190247
Size 6
Series MS
Actuator lock Rotary knob with integrated lock
Mounting position Vertical ±5°
Filter grade 40 µm
Condensate drain Manual, rotating
Max. condensate volume 38 ml
Controller function Output pressure constant; With secondary exhausting
Bowl guard Plastic bowl guard
Degree of condensate separation 75 %
Pressure gauge (ANALOG) or Pressure display (DIGITAL) With pressure gauge
Operating pressure 0.08 MPa to 2 MPa; 0.8 bar to 20 bar
Pressure regulation range 0.3 bar to 7 bar
Max. pressure hysteresis 0.025 MPa; 0.25 bar; 3.625 psi
Standard nominal flow rate (standardised to DIN 1343) 5700 l/min
Operating medium Compressed air to ISO 8573-1:2010 [-:4:-]; Inert gas
Corrosion resistance class CRC 2 – Moderate corrosion stress
LABS (PWIS) conformity VDMA24364-B1/B2-L
Storage temperature -10 °C to 60 °C
Suitable for use with food See supplementary material information
Air purity class at output Compressed air to ISO 8573-1:2010 [7:4:4]
Media temperature -10 °C to 60 °C
Ambient temperature -10 °C to 60 °C
Pore size 40 µm
Product weight 1145 g
Type of mounting Front panel mounting; Inline installation; With accessories
Pneumatic connection, port 1 G3/8
Pneumatic connection, port 2 G3/8
Material control panel Aluminium
Material seals NBR
Material housing Die-cast aluminium
Material membrane NBR
Material bowl Makrolon®

How the MS6-LFR-3/8-D6-ERM-E11 filters and regulates compressed air

Incoming air is made to swirl inside the filter section, so water droplets and coarse particles are thrown to the wall and fall into the bowl, while the 40 µm element holds back finer solids. The datasheet states a degree of condensate separation of 75 %. The collected condensate leaves through the manual, rotating drain.

Downstream, a regulator holds the outlet pressure steady at the set value inside the range 0.3 bar to 7 bar. The datasheet lists the controller function as: output pressure constant; with secondary exhausting. A maximum pressure hysteresis of 0.25 bar describes how far the outlet can differ between rising and falling adjustment, so set pressure by approaching the target from below.

The nominal flow of 5700 l/min is the standardised value. Under higher demand the outlet pressure sags, which matters for fast cylinders and blow-off. The air purity class at the output is Compressed air to ISO 8573-1:2010 [7:4:4], with the unit weighing 1145 g in a die-cast aluminium housing and Makrolon® bowl.

Where MS6-LFR-3/8-D6-ERM-E11 fits: compatible and related parts

The MS modular air-preparation range lets a filter regulator stand alone at a machine inlet or be combined with shut-off valves, soft-start valves, lubricators and distribution blocks from the same series. Mounting options listed on the sheet: front panel mounting; inline installation; with accessories.

Related units we handle in the same series include MS6-LFR-1/2-D6-C-R-V-A4-AS, MS6-LFR-1/2-D7-C-R-M-A4-AS, MS6-LFR-1/2-D6-C-P-M-A8-B, MS6-LFR-1/2-D6-E-P-M-AG-BAR-B, MS4-LFR-1/4-D6-E-P-M-A8-B, MS4-LFR-1/4-D6-E-P-M-AG-BAR-B. They differ in filter element, drain, ports, regulation range and housing, so a replacement must match all of these rather than just the family name.

Selection and ordering checklist for MS6-LFR-3/8-D6-ERM-E11

  • Filter grade 40 µm: use the coarse 40 µm element only when the downstream equipment tolerates it.
  • Condensate drain: manual, rotating, with a bowl capacity of 38 ml.
  • Pressure: operating 0.8 bar to 20 bar and regulation 0.3 bar to 7 bar; confirm both against the machine.
  • Flow: 5700 l/min nominal, to be compared with peak consumption of the branch.
  • Thread: G3/8 on both ports, so check G against NPT before ordering.
  • The integrated lock means the setting cannot be changed once locked, which is useful but must be part of your commissioning procedure. Confirm the G3/8 thread against your pipework.

Installation, commissioning and maintenance of MS6-LFR-3/8-D6-ERM-E11

Install the unit upright (Vertical ±5°) with the bowl downwards and the flow arrow matching the air direction, close to the equipment it protects and downstream of the main air treatment. Leave room beneath the bowl to reach the drain.

At start-up open the supply slowly, then raise the outlet pressure from below to the target. The datasheet lists the actuator lock as: rotary knob with integrated lock. Check the bowl periodically for oil or water, replace the element on a schedule or when pressure drop grows, and keep spare seals and elements for planned stops.

Typical applications of MS6-LFR-3/8-D6-ERM-E11 in Oman and the GCC

Oman and the wider GCC put pneumatic and sensing equipment under demanding conditions: summer ambient heat, fine desert dust, high humidity in coastal plants and compressed-air systems that are not always perfectly dried. The G3/8 ports, 5700 l/min flow and a rotary knob with integrated lock make this the most robust unit in the set, suited to supply headers in shared plant areas where unintended pressure changes must be avoided. It weighs 1145 g, so plan the bracket.

The datasheet lists a corrosion resistance class of 2 – Moderate corrosion stress and media and ambient temperature of -10 °C to 60 °C. In coastal plants with salt-laden air or dusty inland sites, this should be weighed against the housing material, die-cast aluminium, when choosing the mounting location.

MS6-LFR-3/8-D6-ERM-E11 compared with related filter regulators

Key data from the manufacturer sheets of this unit and its closest siblings.

Part number Filter grade Drain Ports Flow (normal) Regulation range
MS6-LFR-3/8-D6-ERM-E11 40 µm Manual, rotating G3/8 5700 l/min 0.3 bar to 7 bar
MS6-LFR-1/2-D6-C-R-V-A4-AS 5 µm Fully automatic G1/2 5600 l/min 0.3 bar to 7 bar
MS6-LFR-1/2-D7-C-R-M-A4-AS 5 µm Manual, rotating G1/2 4000 l/min 0.5 bar to 12 bar
MS6-LFR-1/2-D6-C-P-M-A8-B 5 µm Manual, rotating G1/2 4750 l/min 0.3 bar to 7 bar
MS6-LFR-1/2-D6-E-P-M-AG-BAR-B 40 µm Manual, rotating G1/2 5300 l/min 0.3 bar to 7 bar

Information to send with your MS6-LFR-3/8-D6-ERM-E11 RFQ

  • Full part number MS6-LFR-3/8-D6-ERM-E11 and the quantity required.
  • Pipe thread standard (G or NPT) and size on your system.
  • Supply pressure range, required outlet pressure and peak flow.
  • Whether you need a gauge, mounting bracket or other MS-series accessories.
  • Air quality at the site (dryness, oil carry-over, dust).
  • Delivery location in Oman or the GCC.

Documents and quotation

The manufacturer data sheet for MS6-LFR-3/8-D6-ERM-E11 is attached on this page for download.

Send the part number MS6-LFR-3/8-D6-ERM-E11 with quantity and delivery location and we will confirm availability and a quotation. Seven Star LLC is an independent supplier and is not affiliated with the manufacturer.

Datasheets & Documents
  • PDF Datasheet Festo MS6-LFR-3/8-D6-ERM-E11 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Festo is a German maker of pneumatic and electric automation technology, founded in 1925 in Esslingen am Neckar by Albert Fezer and Gottlieb Stoll; the name comes from their surnames. It first made woodworking machines and power tools before moving into pneumatics in the 1950s. Festo is family-owned and still headquartered in Esslingen.

Seven Star LLC sources and supplies Festo cylinders, valves and valve terminals for machine maintenance and projects in Oman and the GCC.

Festo company profile

Founded 1925, Esslingen am Neckar, Germany
Founders Albert Fezer and Gottlieb Stoll
Name From FEzer and STOll
Headquarters Esslingen am Neckar
Ownership Family-owned
Product families DSBC and ADN pneumatic cylinders, VUVG and VTUG solenoid valves and valve terminals, MS series air preparation units, CPX-AP remote I/O, EMMT servo motors and CMMT servo drives, electric axes and grippers

Milestones

  • 1925: Fezer and Stoll found the company in Esslingen.
  • 1950s: Festo begins making pneumatic components.

Festo products listed

Two items show the two halves of a pneumatic circuit. The VTUG is a valve terminal: a manifold that carries a row of directional valves with common air supply and a shared electrical connection. The DSBC-32-100-PPVA-N3 is an ISO standard cylinder. Its type code reads as 32 mm piston diameter and 100 mm stroke, with adjustable end-position cushioning and a piston magnet for position sensing.

Festo products we list

Family Examples
Automation Accessories KMP3-9P-08-5 Connecting Cable, KMPYE-AIF-1-GS-GD-2 Cable
Pneumatic Cylinders ADN-100-30-A-P-A Compact Cylinder
Valve Actuators DSBC-32-100-PPVA-N3 ISO Cylinder
Pressure Instrumentation VPEV-1/8 Pressure Switch
Solenoid Valves VTUG Valve Terminal

Ordering Festo parts: what we need

Festo parts carry both a type code and a numeric part number on the label. Send both when you can; the part number is the shortest route to an exact match. For a cylinder give the full type code as on the listed DSBC example, plus mounting parts and proximity switches if required. For a VTUG valve terminal send the configuration code or a label photo: number of valve positions, valve functions, coil voltage and the electrical connection type all vary from one terminal to the next.

Facts checked against Festo's corporate history pages, October 2026.

FAQ

Questions about the Festo MS6-LFR-3/8-D6-ERM-E11 Filter Regulator

Answers from our engineering team on installation, compatibility and integration.

01What filter grade does the MS6-LFR-3/8-D6-ERM-E11 have?
The datasheet lists a filter grade of 40 µm with manual, rotating condensate drainage and a bowl capacity of 38 ml.
02What pressure range does the MS6-LFR-3/8-D6-ERM-E11 regulate?
The regulation range is 0.3 bar to 7 bar and the operating pressure is 0.8 bar to 20 bar, according to the data sheet for article 8190247.
03What flow rate does the MS6-LFR-3/8-D6-ERM-E11 support?
The standard nominal flow rate on the datasheet is 5700 l/min, standardised to DIN 1343. Demand above that causes the outlet pressure to droop.
04What port size does the MS6-LFR-3/8-D6-ERM-E11 use?
Both ports are G3/8. G and NPT threads are not interchangeable, so match the thread to your pipework.
05How is the MS6-LFR-3/8-D6-ERM-E11 mounted?
It is installed upright, within a tolerance of five degrees, bowl down. The sheet lists in-line installation or front panel mounting, with accessories for the latter.