Brand:

Hoke HQC4-B-4-316 Quick-Connect Body with Valve, 1/4 in

Description

Hoke HQC4-B-4-316 body with valve overview

The Hoke HQC4-B-4-316 is the standard valved body of the 1/4 inch HQC series quick coupling. The manufacturer lists it in the section for body assemblies with valves, with a tube connection for 1/4 inch tube, and it is machined from 316 stainless steel. It is the fixed half of a quick coupling pair: the body is connected to the instrument, manifold or sample line, and a plug on the other line is pushed in to complete the connection. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

According to the catalogue, the poppet valve in a single end shutoff arrangement sits in the body half, which means the Hoke HQC4-B-4-316 closes the instrument side when the plug is removed. Used with a valved plug, the coupling shuts off on both sides. Either way, the body uses multiple O-ring seals, a valve guide for exact alignment with its seat, and a locking mechanism that gives a smooth, positive sleeve engagement.

Key features of HQC4-B-4-316

  • Valved body with a Gyrolok nut and ferrule connection for 1/4 inch tube.
  • 316 stainless steel machined parts and 316 stainless steel springs.
  • Viton O-ring seals as standard, with Krytox as the standard lubricant.
  • Locking mechanism with smooth sleeve engagement and Xylan-coated stainless locking tabs on the plug side.
  • Keyed sleeves for all sizes in the series.
  • Special high tolerance NPT thread, noted by the manufacturer for the range.
  • Rated working pressure of 3600 psi for the 1/4 inch size.

HQC4-B-4-316 technical specifications

The values below come from the HQC series catalogue. The dimension letters follow the catalogue drawing, and the pressure and temperature data are series values for the 1/4 inch size.

Part number HQC4-B-4-316
Brand Hoke
Series HQC instrumentation quick couplings
Body size 1/4 inch (HQC4)
Construction 316 stainless steel; machined parts AISI 316, springs and retaining rings AISI 316
Rated working pressure 3600 psi connected and 3600 psi disconnected for the 1/4 inch size; connect under pressure up to 250 psi
Seals Viton O-rings as standard, +20 to +400 degrees F, Krytox lubricant as standard
Type Body assembly with valve, tube connection
Tube size 1/4 inch
Dimension A 2.22 inch
Hex size B 0.63 inch
Dimension C 0.88 inch
Flow coefficient, HQC4 size Cv 0.31 double end shutoff, Cv 0.45 single end shutoff
Nut and ferrule Gyrolok end connection

Typical applications in Oman and the GCC

The manufacturer lists laboratories, university laboratories, gas distribution and biopharmaceutical processes as typical applications. In Oman and the GCC, valved bodies of this kind are found on sampling skids, analyser feed lines, gas chromatograph supply connections and calibration points in refineries, gas plants, power stations and desalination or water treatment facilities.

Because the body closes by itself when the plug is removed, it keeps the instrument line sealed during sample bottle changes and during work on portable equipment. That helps keep air out of a purged sample line and keeps process gas in the system.

Selection and compatibility notes for HQC4-B-4-316

Make sure the tube size is 1/4 inch and the media is compatible with 316 stainless steel and with Viton seals. Check that system pressure does not exceed 3600 psi and that the operating temperature is within the seal range of plus 20 to plus 400 degrees F stated in the catalogue. If the fixed side is a panel wall, consider the bulkhead version HQC4-B1-4-316 instead.

Choose the plug to suit the shutoff you want. With the valved plug HQC4-D-4-316 the coupling has double end shutoff and the catalogue gives a Cv of 0.31 for the HQC4 size. With a non-valved plug the coupling has single end shutoff and a Cv of 0.45. Use HQC6 or HQC8 sizes when more flow is required, and remember that the manufacturer describes the series as interchangeable with similar quick couplings from other well-known brands, so confirm any mixed use against the data of both makers.

Installation and handling of HQC4-B-4-316

Make up the HQC4-B-4-316 on clean, square-cut 1/4 inch tube with the Gyrolok nut and ferrule, following standard tube fitting practice. Leak test with an inert gas before using process media. Connect the plug to the body by pushing it in until the sleeve latches, and connect under pressure only up to the 250 psi limit in the catalogue. Installation should be carried out by qualified staff.

Maintenance

Inspect the body regularly. Look at the sleeve, the sealing area and the poppet for wear and dirt, and replace O-rings that are cracked or swollen. Fit the dust cap HQC4-C-316 when the body is unused. Take any coupling that does not latch properly or that leaks out of service until it has been checked.

Related products and ordering notes

Related catalogue items are the bulkhead body HQC4-B1-4-316, the valved plug HQC4-D-4-316 and the dust cap HQC4-C-316. When you ask for a quotation for the HQC4-B-4-316, include the mating plug and the quantity. In summary, the HQC4-B-4-316 is a 316 stainless steel 1/4 inch tube body with valve, rated for 3600 psi.

Documents and quotation

The HQC series catalogue from the manufacturer is attached to this page as a datasheet. To request a quotation for the HQC4-B-4-316, send your RFQ to Seven Star LLC with the part number HQC4-B-4-316, the quantity needed and the delivery destination, plus the mating plug if known. No prices are shown on this page.

Other Models in the HQC4 Range

Seven Star LLC supplies models from the HQC4 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Hoke HQC4-B1-4-316 Bulkhead Quick-Connect Body, 1/4 inInstrument Valves & FittingsView details
Hoke HQC4-D-4-316 Valved Quick-Connect Plug, 1/4 inInstrument Valves & FittingsView details
Hoke HQC4-C-316 Quick-Connect Body Dust Cap, 1/4 inInstrument Valves & FittingsView details
Hoke HQC4-B-4-316 Quick-Connect Body with Valve, 1/4 inInstrument Valves & FittingsYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Hoke HQC4-B-4-316 Quick-Connect Body with Valve, 1/4 in Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Hoke is an instrumentation flow-control brand specializing in small-bore valves and fittings, part of Crane Instrumentation & Sampling. The range includes needle, ball, metering, plug and packless valves, double block and bleed and monoweld designs, Gyrolok tube fittings, instrumentation manifolds, quick couplings, and sampling cylinders with their valves and accessories. Hoke products are used wherever sample lines, gauges, transmitters and analyzers have to be isolated, vented or sampled cleanly across process industries. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We help buyers match valve, fitting and sample cylinder part numbers to their tubing size, pressure rating and material requirements, so installations stay leak-tight and easy to maintain.

FAQ

Questions about the Hoke HQC4-B-4-316 Quick-Connect Body with Valve,

Answers from our engineering team on installation, compatibility and integration.

01What is the Hoke HQC4-B-4-316?
It is a body assembly with valve from the Hoke HQC quick coupling series, in 316 stainless steel, with a 1/4 inch body size and a 1/4 inch tube connection.
02What are the dimensions of the HQC4-B-4-316?
The catalogue lists dimension A as 2.22 inch, a hex of 0.63 inch and dimension C of 0.88 inch for this body with valve.
03What pressure rating applies to the HQC4-B-4-316?
For the 1/4 inch size the catalogue gives 3600 psi rated working pressure, connected or disconnected, and connection under pressure up to 250 psi.
04Which plug fits the HQC4-B-4-316?
Any 1/4 inch HQC4 plug, such as the valved plug HQC4-D-4-316. The matching dust cap for the body is the HQC4-C-316.
05How do I request a quotation for the HQC4-B-4-316?
Send an RFQ to Seven Star LLC with the part number HQC4-B-4-316, the quantity, the plug you plan to mate and the delivery location in Oman or the GCC.