Brand:

Hoke HQC4-D-4-316 Valved Quick-Connect Plug, 1/4 in

Description

Hoke HQC4-D-4-316 valved plug (stem) overview

The Hoke HQC4-D-4-316 is the valved plug half of a 1/4 inch HQC quick coupling. In the manufacturer catalogue it appears under plugs, valved, double end shutoff, with a 1/4 inch body size and a 1/4 inch tube connection, and like the rest of the series it is built from 316 stainless steel. The plug is the half that normally goes on a portable hose, a sample bottle line or a calibration gas connection, where it is joined to a fixed body. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

In double end shutoff service, both the plug and the body contain a poppet valve with an integral O-ring seal. When the coupling is separated, each poppet closes against its seat, so neither side vents the contents of its line. The manufacturer also fits valve guides that align the poppet exactly with the seat, which reduces the chance of leakage in the disconnected state.

Key features of Hoke HQC4-D-4-316

  • Valved plug for double end shutoff, so both halves seal when disconnected.
  • 316 stainless steel parts, including springs, for corrosion resistance and strength.
  • Multiple O-rings, with Viton as the standard seal material.
  • Plug firmly held by Xylan-coated stainless steel locking tabs when mated with a body.
  • Gyrolok nut and ferrule tube connection for a leak tight 1/4 inch tube joint.
  • Keyed sleeves for all sizes of the series.
  • Compact length of 2.42 inch and a hex of 0.56 inch.

HQC4-D-4-316 technical specifications

The values below come from the HQC series catalogue. The dimension letters follow the catalogue drawing, and the pressure and temperature figures are the series data for the 1/4 inch size.

Part number HQC4-D-4-316
Brand Hoke
Series HQC instrumentation quick couplings
Body size 1/4 inch (HQC4)
Construction 316 stainless steel; machined parts AISI 316, springs and retaining rings AISI 316
Rated working pressure 3600 psi connected and 3600 psi disconnected for the 1/4 inch size; connect under pressure up to 250 psi
Seals Viton O-rings as standard, +20 to +400 degrees F, Krytox lubricant as standard
Type Plug, valved, double end shutoff (DESO), tube connection
Tube size 1/4 inch
Dimension A 2.42 inch
Hex size B 0.56 inch
Dimension C 0.62 inch
Flow coefficient, HQC4 size Cv 0.31 double end shutoff
Nut and ferrule Gyrolok end connection

Typical applications in Oman and the GCC

The catalogue names laboratories, university laboratories, gas distribution and biopharmaceutical applications. In the Gulf region a valved plug of this type is common in sampling and calibration work: laboratory gas manifolds, analyser calibration lines, sample cylinders and portable test rigs at gas processing, petrochemical, power and water sites.

A double end shutoff plug is chosen where a line must not leak or lose its contents when it is unplugged, for example a pressurised sample line or a line holding a costly calibration mixture. Because the plug closes itself, the operator can disconnect without first closing a separate manual valve, which shortens the routine for changing sample bottles or moving a rig between test points and helps keep the work area clean.

Selection and compatibility notes for HQC4-D-4-316

Pair the HQC4-D-4-316 with a 1/4 inch HQC4 body that has a valve, such as the HQC4-B-4-316 or the bulkhead body HQC4-B1-4-316. Check the tube size and the media compatibility of 316 stainless steel and Viton. The catalogue rates the 1/4 inch size at 3600 psi working pressure and allows connection under pressure up to 250 psi, so plan the procedure so that couplings are mated at a pressure below that limit.

The flow coefficient depends on the shutoff arrangement. The catalogue shows a Cv of 0.31 for double end shutoff in the HQC4 size, lower than the 0.45 shown for single end shutoff. If your application needs more flow, consider the larger HQC6 or HQC8 sizes listed by the manufacturer.

Installation and handling of HQC4-D-4-316

Fit the Gyrolok nut and ferrule set to clean, square-cut 1/4 inch tube following the standard tube fitting steps, and leak test the plug with an inert gas before putting it into service. Join it to the body by pushing the plug into the sleeve until the locking tabs engage, and check that the connection is firm. Only trained staff should install these products, and the system designer must consider safe venting if hazardous media are used.

Maintenance

Inspect the O-rings, the poppet and the plug seat at regular intervals, and replace worn seals. Keep the plug end clean and protected with a dust plug when it is unused. If a plug shows leakage after disconnection, take it out of service. Standard lubricant is Krytox, and a compatible lubricant should be used when servicing the seals.

Related products and ordering notes

Related HQC4 parts in the catalogue are the valved body HQC4-B-4-316, the bulkhead body HQC4-B1-4-316 and the dust cap HQC4-C-316. When you ask for a quotation on the HQC4-D-4-316, mention the body you will mate it with and the quantity. In summary, the HQC4-D-4-316 is a 1/4 inch tube valved plug for double end shutoff in 316 stainless steel.

Documents and quotation

The HQC series catalogue from the manufacturer is attached to this page as a datasheet. To request a quotation for the HQC4-D-4-316, send your RFQ to Seven Star LLC with the part number HQC4-D-4-316, the quantity required and the delivery destination, plus the mating body part number if known. No prices are shown on this page.

Other Models in the HQC4 Range

Seven Star LLC supplies models from the HQC4 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Hoke HQC4-B1-4-316 Bulkhead Quick-Connect Body, 1/4 inInstrument Valves & FittingsView details
Hoke HQC4-D-4-316 Valved Quick-Connect Plug, 1/4 inInstrument Valves & FittingsYou are viewing this model
Hoke HQC4-C-316 Quick-Connect Body Dust Cap, 1/4 inInstrument Valves & FittingsView details
Hoke HQC4-B-4-316 Quick-Connect Body with Valve, 1/4 inInstrument Valves & FittingsView details
Datasheets & Documents
  • PDF Datasheet Hoke HQC4-D-4-316 Valved Quick-Connect Plug, 1/4 in Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Hoke is an instrumentation flow-control brand specializing in small-bore valves and fittings, part of Crane Instrumentation & Sampling. The range includes needle, ball, metering, plug and packless valves, double block and bleed and monoweld designs, Gyrolok tube fittings, instrumentation manifolds, quick couplings, and sampling cylinders with their valves and accessories. Hoke products are used wherever sample lines, gauges, transmitters and analyzers have to be isolated, vented or sampled cleanly across process industries. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We help buyers match valve, fitting and sample cylinder part numbers to their tubing size, pressure rating and material requirements, so installations stay leak-tight and easy to maintain.

FAQ

Questions about the Hoke HQC4-D-4-316 Valved Quick-Connect Plug, 1/4 in

Answers from our engineering team on installation, compatibility and integration.

01What is the Hoke HQC4-D-4-316?
It is a valved plug, also called a stem, from the Hoke HQC quick coupling series. It is made of 316 stainless steel with a 1/4 inch body size and a 1/4 inch tube connection.
02What does double end shutoff mean for the HQC4-D-4-316?
The catalogue lists this plug as valved for double end shutoff, so with a valved body the poppet valves in both halves close when the coupling is disconnected.
03What are the dimensions of the HQC4-D-4-316?
The catalogue gives dimension A as 2.42 inch, a hex of 0.56 inch and dimension C of 0.62 inch for this valved plug.
04Which body does the HQC4-D-4-316 connect to?
It connects to a 1/4 inch HQC4 body, for example the HQC4-B-4-316 body with valve or the HQC4-B1-4-316 bulkhead body, as listed in the same catalogue.
05How do I request a quotation for the HQC4-D-4-316?
Send an RFQ to Seven Star LLC with the part number HQC4-D-4-316, the quantity, the body part number you will mate it with and the delivery location in Oman or the GCC.