- Automation & ControlView all 2,760 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Panametrics
Panametrics pro.IQ Moisture Analyzer Packaged Solution
Description
Panametrics pro.IQ overview
The Panametrics pro.IQ is a packaged moisture analyzer solution that simplifies the selection and installation of a trace moisture measurement. The package combines a HygroProII moisture transmitter, a sample system and, when an ATEX Zone 1 or Class I Division 1 option is chosen, a Zener barrier, all inside an IP66 and NEMA 4X enclosure. The user installs the transmitter, connects loop power and the sample gas or liquid to the inlet fitting, and the system is ready to measure.
The sample system provides isolation, filtration, pressure indication on gas systems and flow indication on both gas and liquid systems. The enclosure is offered in 304 stainless steel and 316 stainless steel and has a clear door so every reading can be seen without opening it, and an optional 80 W heater is available. The design draws on more than 50 years of Panametrics sample system experience according to the datasheet.
Key features of the Panametrics pro.IQ
- Complete package: HygroProII transmitter, sample system and enclosure, with Zener barrier for hazardous options.
- IP66 and NEMA 4X enclosure in 304SS or 316SS with a clear door.
- Gas system or liquid system, selected as option B.
- Certification options from safe area to Class I Division 1 and 2 and ATEX or IECEx Zone 1 and Zone 2.
- Optional 80 W enclosure heater.
- Imperial 1/4 inch or metric 6 mm fittings.
- 4 to 20 mA analog output with HART digital communication from the transmitter.
pro.IQ technical specifications
| Parameter | Value |
|---|---|
| Transmitter | HygroProII, thin-film aluminum oxide sensor |
| Moisture content | -110 to 20 deg C dew/frost point, non-condensing |
| Standard calibration range | -80 to 10 deg C with data from -110 to 20 deg C |
| Calibrated accuracy at 25 deg C | Plus or minus 2 deg C above -100 deg C; plus or minus 3 deg C below -100 deg C |
| Power | 12 to 30 VDC loop powered, customer supplied |
| Output | 4 to 20 mA and HART; 0.01 mA (12 bit) resolution |
| Display | 128 x 64 backlit LCD, one to three parameters |
| General purpose pressure | Gas or liquid 0 to 200 psig (14 bar) |
| Hazardous area pressure | Gas 0 to 400 psig (27 bar); liquid 0 to 500 psig (34.5 bar) |
| Operating temperature | General purpose 0 to 50 deg C; hazardous configuration 0 to 60 deg C |
| Heater | Optional 80 W |
| Enclosure materials | 304SS or 316SS |
| Fittings | Imperial 1/4 inch or metric 6 mm |
| Transmitter rating | Type 4X / IP67; weight 2.75 lb (1250 g) |
| Sensor recalibration | Every six to twelve months recommended |
The ordering code follows the pattern pro.IQ with option letters for gas or liquid system, certification, heater, enclosure and fittings, so your RFQ should list each choice.
Typical applications in Oman and the GCC
The standard package is designed for moisture measurement in hydrocarbon gas, hydrocarbon liquids and inert gas. Typical users in the GCC are natural gas processing and transmission, petrochemical plants, industrial gas producers, metal heat treatment shops and power generation sites. Because the enclosure is rated IP66 and NEMA 4X it can be mounted outdoors near the process, which shortens sample lines and reduces response time compared with a remote analyzer room.
Selection and compatibility notes
Decide first whether the stream is gas or liquid, then select the hazardous area certification that matches your classification drawing. Note that the hazardous configuration allows higher sample pressure than the general purpose one, so check the maximum line pressure at the sample tap. If the ambient temperature drops low enough to risk condensation inside the enclosure, add the heater option. Choose 316SS where coastal salt-laden air is a concern.
Installation and commissioning
Insert the moisture transmitter into the sample cell and connect earth to the transmitter ground screw. Follow the HygroProII wiring instructions, paying particular attention to Zener barrier wiring in hazardous areas. For gas with a possible light liquid contaminant, fit the supplied fibre filter element and crack the drain needle valve. Start with the inlet, drain and outlet valves closed, open the inlet slowly, then adjust the outlet valve to obtain mid-range flow.
Maintenance and service life
To shut down, close the inlet needle valve slowly, open the drain needle valve until the gauge or display reads 0 psig, and then remove the transmitter. Replace filter elements when they become loaded, and plan sensor recalibration every six to twelve months depending on the application. Keep the enclosure door gaskets clean so the IP66 rating is retained.
Related products and ordering notes
Other Panametrics items that fit alongside the pro.IQ include the HygroPro RTE replacement element, the oxy.IQ oxygen transmitter and the moisture.IQ analyzer. In your RFQ for the pro.IQ please give the option letters you need, the process fluid, the operating pressure and the area classification. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Quick answers about the pro.IQ
- What is included in the pro.IQ package? It comprises a HygroProII moisture transmitter, a configurable sample system and a Zener barrier for ATEX Zone 1 or Class I Division 1 options, in a 304SS or 316SS enclosure.
- What pressure can the pro.IQ handle? General purpose systems are specified to 200 psig (14 bar); hazardous area systems to 400 psig (27 bar) for gas or 500 psig (34.5 bar) for liquid.
- What output does the pro.IQ give? The HygroProII transmitter provides a loop-powered 4 to 20 mA output with HART digital communication, powered from 12 to 30 VDC.
Documents and quotation
A manufacturer datasheet for the pro.IQ is available from Seven Star LLC on request and is attached to this listing where provided. To receive a quotation, send the RFQ with the part number pro.IQ, the quantity required and your delivery location, together with any hazardous area, range or configuration details from your project specification.
Other Models in the Panametrics Moisture Range
Seven Star LLC supplies models from the Panametrics Moisture range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Panametrics PM880 Portable Hygrometer for Trace Moisture | Humidity & Dew Point Instruments | View details |
| Panametrics pro.IQ Moisture Analyzer Packaged Solution | Humidity & Dew Point Instruments | You are viewing this model |
Datasheets & Documents
- Datasheet Panametrics pro.IQ Moisture Analyzer Packaged Solution Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Panametrics is an American maker of ultrasonic flowmeters and moisture, oxygen and gas analysers. It was founded in 1960 and was based in Waltham, Massachusetts, when GE bought it in 2002. It later became a Baker Hughes business, and since 1 January 2026 it has belonged to Crane Company. Its long-running site in Shannon, Ireland, opened in 1973.
Seven Star LLC lists Panametrics flowmeters and analyzers for buyers in Oman: DigitalFlow gas and flare meters, clamp-on and portable liquid meters, and trace moisture analyzers for natural gas and process gases. We are an independent supplier, so each inquiry is checked against the manufacturer's order string before a quotation goes out.
Panametrics company profile
| Founded | 1960, Massachusetts, USA |
|---|---|
| Main sites | Billerica, Massachusetts, and Shannon, Ireland (since 1973) |
| Ownership | Crane Company since 1 January 2026; previously GE (from 2002) and Baker Hughes |
| Key technology | Transit-time ultrasonic flow measurement and aluminium oxide moisture sensing |
| Product families | TransPort PT900 portable and DigitalFlow fixed ultrasonic flowmeters for liquid, gas and flare gas, aluminium oxide moisture probes and hygrometers, Aurora laser moisture analysers, XMO2 oxygen and XMTC thermal conductivity transmitters |
Milestones
- 1960: Panametrics is founded.
- 1973: The Shannon, Ireland, site is established.
- 2002: GE acquires Panametrics.
- 2026: Crane Company completes its purchase of Baker Hughes' Precision Sensors & Instrumentation, including Panametrics.
Panametrics product families on this page
The listed items follow the manufacturer's own grouping:
- Gas and flare flow: DigitalFlow GF868 flare gas meter, GM868 and XGM868i gas flow transmitters
- Liquid flow: XMT1000 transmitter, AT600 AquaTrans clamp-on meter, TransPort PT900 portable meter
- Moisture: moisture.IQ multichannel analyzer, HygroPro II aluminum oxide transmitter, Aurora TDLAS analyzer for natural gas
Older units may carry GE Panametrics or GE Sensing on the nameplate. They belong to the same product lines, and the model string is read the same way.
Where Panametrics flowmeters and moisture analyzers are used
Flare meters report flared volumes on production sites, refineries and LNG plants. Clamp-on and portable ultrasonic meters check water, hydrocarbon liquid and utility lines without cutting the pipe. Aluminum oxide and TDLAS moisture analyzers watch dehydration units, gas pipelines, hydrogen and industrial gas streams. The manufacturer also names chemical processing, energy and water and wastewater among its markets, which matches what GCC operators ask us for.
Panametrics products we list
Ordering Panametrics equipment: what we need
A Panametrics model is a long configuration string, and the transducers or probes are ordered separately. Please send the full model and serial number of the electronics, the transducer or moisture probe part number, pipe size, schedule and material, fluid, pressure and temperature, flow range, hazardous area approval and output or protocol. For a flare meter add the flare gas composition range and velocity range. For moisture, give the dew point range and whether sample system components are required.
Facts checked against GE's 2002 acquisition release, Crane Company's January 2026 completion release and Irish press, October 2026.
FAQ
Questions about the Panametrics pro.IQ Moisture Analyzer Packaged
Answers from our engineering team on installation, compatibility and integration.
01What is included in the pro.IQ package?
It comprises a HygroProII moisture transmitter, a configurable sample system and a Zener barrier for ATEX Zone 1 or Class I Division 1 options, in a 304SS or 316SS enclosure.
02What pressure can the pro.IQ handle?
General purpose systems are specified to 200 psig (14 bar); hazardous area systems to 400 psig (27 bar) for gas or 500 psig (34.5 bar) for liquid.
03What output does the pro.IQ give?
The HygroProII transmitter provides a loop-powered 4 to 20 mA output with HART digital communication, powered from 12 to 30 VDC.
04Can the pro.IQ be heated?
Yes. An optional 80 W heater is offered as option D in the ordering code.
05How often should the sensor be recalibrated?
The manufacturer recommends sensor recalibration every six to twelve months depending on the application.


















Reviews
There are no reviews yet.