Brand:

Panametrics PM880 Portable Hygrometer for Trace Moisture

Description

Panametrics PM880 overview

The Panametrics PM880 is a complete, intrinsically safe, portable hygrometer for industrial moisture measurement. It is small, lightweight and designed to be carried to the sample point, with a large graphic LCD that shows moisture in dew point (deg C or deg F), ppmv, ppmw, pounds per million standard cubic feet for natural gas and a range of other units. Readings can be viewed in alphanumeric or graphic format, and a rechargeable battery pack and charger make the Panametrics PM880 a go-anywhere moisture analyzer for survey and spot-check work.

The PM880 is used together with Panametrics aluminum oxide moisture probes, including the Moisture Image Series, TF and M Series probes. It ships in a soft zippered carrying case that holds the instrument, a portable sample system, flexible hosing, probes with protective covers, the probe electronics module, the operating manual, the battery pack, the charger and the probe cables, so a technician can respond to a moisture query with a single bag.

Key features of the PM880

  • Hand-held portable design, intrinsically safe, with Type 4X and IP67 enclosure rating.
  • Large graphic display of 240 x 200 pixels, backlit, with a 25-key rubberized keypad.
  • Internal data logger with memory for over 100,000 moisture data points and up to 60 log or site files.
  • Optional IrDA communication with a PC and a PC infrared adapter accessory.
  • Compatible with all Panametrics aluminum oxide moisture probes, each type needing its own I/O cable.
  • Rechargeable battery giving 15 to 24 hours of operation depending on probe type, with a charge time of about three hours.
  • Included portable sample system and carrying case.

PM880 technical specifications

Parameter Value
Channels Single channel
Size 9.4 x 5.5 x 1.5 in (238 x 138 x 38 mm)
Weight Electronics 2.5 lb (1.13 kg); sample system 4 lb (1.8 kg)
Enclosure Type 4X, IP67
Display 240 x 200 pixel graphic backlit LCD
Memory FLASH; logs over 100,000 moisture data points
Operating temperature 14 to 122 deg F (-10 to 50 deg C)
Battery charger Switchable 115 or 230 VAC, 50/60 Hz
Dew point calibration Standard 10 to -80 deg C with data from 20 to -110 deg C
Dew point accuracy Plus or minus 2 deg C above -100 deg C; plus or minus 3 deg C below -100 deg C
Dew point repeatability Plus or minus 0.2 deg C above -100 deg C; plus or minus 0.5 deg C below
Operating pressure 5 micron Hg to 5000 psig (345 bar), limited by pressure sensor
Hazardous area Baseefa II 1 G EEx ia IIC T3; CSA C US Class I, Division 1, Groups A, B, C and D
Sample system SS880A 316 stainless steel wetted parts; standard maximum 3000 psig (207 bar), optional 5000 psig (345 bar)

These figures come from the manufacturer PM880 datasheet. Optional items such as the inlet pressure regulator (0 to 500 psig outlet), armored flowmeter (1.3 to 13 SCFH) and PTFE-lined braided hose are specified at ordering.

Typical applications in Oman and the GCC

For Omani and GCC operators the PM880 suits natural gas dehydration checks, petrochemical and chemical gases, air separation plants, industrial gas cylinder preparation and filling, tanker preparation, SF6 circuit breaker gas servicing, furnace gases and general plant maintenance. Because the instrument is intrinsically safe and battery powered, technicians can use it on a gas gathering or processing site without hot work permits for a mains-powered analyzer, subject to the site rules and the certificate conditions.

Selection and compatibility notes

Confirm the probe family you will run, because the datasheet notes that each probe type needs a different I/O cable. If you need pressure-compensated units such as ppmv or pounds per million standard cubic feet, choose a probe with the optional pressure sensor. The hose option is not recommended for dew points below -75 deg C, so very dry service should use the stainless steel braided hose instead.

Installation and commissioning

Set up the PM880 sample system with the inlet needle valve closed, connect the hose, fit the probe in the sample cell and open the inlet slowly. Use the bypass needle valve and the outlet valve to set a gentle flow, and vent through the venting tube to a safe location. Batteries can be installed or removed in hazardous areas, but they must be recharged in non-hazardous areas only. Record the site parameters in the instrument so that later logs are clearly labelled.

Maintenance and service life

Recharge the battery after each field trip and avoid storing the unit above 35 deg C for longer than one month, as the manufacturer recommends. Keep probe covers fitted when the probe is not in use, keep the sample cell and filter clean and dry, and send the moisture sensor for recalibration on a regular schedule. The manufacturer also offers NIST-traceable calibration, field calibration, rentals and moisture surveys as services.

Related products and ordering notes

Related Panametrics items on this site include the MISP2 probe and other moisture instruments. When ordering a PM880 package, state which probe, cable length, pressure range and sample system pressure rating you need so the quotation reflects the correct accessories. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Quick answers about the PM880

  • What does the PM880 measure? It is a portable hygrometer for moisture in gases and non-aqueous liquids, displaying dew point, ppmv, ppmw, pounds per million standard cubic feet and other units.
  • Is the PM880 intrinsically safe? Yes. The datasheet lists Baseefa II 1 G EEx ia IIC T3 and CSA C US Class I, Division 1, Groups A, B, C and D certification.
  • How long does the PM880 battery last? The manufacturer states 15 to 24 hours depending on probe type, shorter when operated below 0 deg C, with about three hours needed for a full recharge.

Documents and quotation

A manufacturer datasheet for the PM880 is available from Seven Star LLC on request and is attached to this listing where provided. To receive a quotation, send the RFQ with the part number PM880, the quantity required and your delivery location, together with any hazardous area, range or configuration details from your project specification.

Other Models in the Panametrics Moisture Range

Seven Star LLC supplies models from the Panametrics Moisture range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Panametrics PM880 Portable Hygrometer for Trace MoistureHumidity & Dew Point InstrumentsYou are viewing this model
Panametrics pro.IQ Moisture Analyzer Packaged SolutionHumidity & Dew Point InstrumentsView details
Datasheets & Documents
  • PDF Datasheet Panametrics PM880 Portable Hygrometer for Trace Moisture Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Panametrics is an American maker of ultrasonic flowmeters and moisture, oxygen and gas analysers. It was founded in 1960 and was based in Waltham, Massachusetts, when GE bought it in 2002. It later became a Baker Hughes business, and since 1 January 2026 it has belonged to Crane Company. Its long-running site in Shannon, Ireland, opened in 1973.

Seven Star LLC lists Panametrics flowmeters and analyzers for buyers in Oman: DigitalFlow gas and flare meters, clamp-on and portable liquid meters, and trace moisture analyzers for natural gas and process gases. We are an independent supplier, so each inquiry is checked against the manufacturer's order string before a quotation goes out.

Panametrics company profile

Founded 1960, Massachusetts, USA
Main sites Billerica, Massachusetts, and Shannon, Ireland (since 1973)
Ownership Crane Company since 1 January 2026; previously GE (from 2002) and Baker Hughes
Key technology Transit-time ultrasonic flow measurement and aluminium oxide moisture sensing
Product families TransPort PT900 portable and DigitalFlow fixed ultrasonic flowmeters for liquid, gas and flare gas, aluminium oxide moisture probes and hygrometers, Aurora laser moisture analysers, XMO2 oxygen and XMTC thermal conductivity transmitters

Milestones

  • 1960: Panametrics is founded.
  • 1973: The Shannon, Ireland, site is established.
  • 2002: GE acquires Panametrics.
  • 2026: Crane Company completes its purchase of Baker Hughes' Precision Sensors & Instrumentation, including Panametrics.

Panametrics product families on this page

The listed items follow the manufacturer's own grouping:

  • Gas and flare flow: DigitalFlow GF868 flare gas meter, GM868 and XGM868i gas flow transmitters
  • Liquid flow: XMT1000 transmitter, AT600 AquaTrans clamp-on meter, TransPort PT900 portable meter
  • Moisture: moisture.IQ multichannel analyzer, HygroPro II aluminum oxide transmitter, Aurora TDLAS analyzer for natural gas

Older units may carry GE Panametrics or GE Sensing on the nameplate. They belong to the same product lines, and the model string is read the same way.

Where Panametrics flowmeters and moisture analyzers are used

Flare meters report flared volumes on production sites, refineries and LNG plants. Clamp-on and portable ultrasonic meters check water, hydrocarbon liquid and utility lines without cutting the pipe. Aluminum oxide and TDLAS moisture analyzers watch dehydration units, gas pipelines, hydrogen and industrial gas streams. The manufacturer also names chemical processing, energy and water and wastewater among its markets, which matches what GCC operators ask us for.

Panametrics products we list

Family Examples
Flowmeters AT600 AquaTrans Clamp-On Ultrasonic Wate…, DigitalFlow GM868 General-Purpose Gas Ul…, GF868 DigitalFlow Flare Gas Ultrasonic F…, PT900 TransPort Portable Ultrasonic Flow…, XGM868i DigitalFlow Gas Ultrasonic Flow…, XMT1000 Liquid Flow Ultrasonic Transmitter
Gas Analyzer Systems Aurora TDLAS Moisture Analyzer for Natur…, HygroPro II Aluminum Oxide Moisture Tran…, moisture.IQ Multichannel Trace Moisture…

Ordering Panametrics equipment: what we need

A Panametrics model is a long configuration string, and the transducers or probes are ordered separately. Please send the full model and serial number of the electronics, the transducer or moisture probe part number, pipe size, schedule and material, fluid, pressure and temperature, flow range, hazardous area approval and output or protocol. For a flare meter add the flare gas composition range and velocity range. For moisture, give the dew point range and whether sample system components are required.

Facts checked against GE's 2002 acquisition release, Crane Company's January 2026 completion release and Irish press, October 2026.

FAQ

Questions about the Panametrics PM880 Portable Hygrometer for Trace

Answers from our engineering team on installation, compatibility and integration.

01What does the PM880 measure?
It is a portable hygrometer for moisture in gases and non-aqueous liquids, displaying dew point, ppmv, ppmw, pounds per million standard cubic feet and other units.
02Is the PM880 intrinsically safe?
Yes. The datasheet lists Baseefa II 1 G EEx ia IIC T3 and CSA C US Class I, Division 1, Groups A, B, C and D certification.
03How long does the PM880 battery last?
The manufacturer states 15 to 24 hours depending on probe type, shorter when operated below 0 deg C, with about three hours needed for a full recharge.
04Which probes can the PM880 use?
It works with Panametrics aluminum oxide moisture probes including the Moisture Image Series and M Series, each with its own type of cable.
05Can the PM880 log data?
Yes. It has an internal data logger holding over 100,000 moisture data points, with programmable log units, update times and start and stop times.