Brand:

KRACHT RA 38-Z45/28-Z45/42 Coupling for KF Gear Pump

Description

KRACHT RA 38-Z45/28-Z45/42 flexible coupling for KF gear pumps: overview

The KRACHT RA 38-Z45/28-Z45/42 is a shaft coupling from the KRACHT accessory range for KF low-pressure gear pumps. It connects the pump shaft to the shaft of an IEC electric motor inside the bellhousing and, being a flexible type, it tolerates small alignment errors. According to the KF catalog, the KRACHT RA 38-Z45/28-Z45/42 is the coupling assigned to KF nominal sizes 100 to 200 with IEC motor frame 160 M/L 45, with the hub made of aluminium.

Replacement couplings are a classic spare-part request: the elastic element wears, the hub bore changes when a motor is replaced, and the designation is the fastest way to describe what is needed. The RA 38-Z45/28-Z45/42 carries every bore and hub length in the code itself, so a maintenance planner can compare it with the nameplate data before ordering.

How to read the RA 38-Z45/28-Z45/42 designation

  • RA: manufacturer short description, with the second letter giving the hub material (A for aluminium, G for cast iron). In this code the hub material is aluminium.
  • 38 is the coupling size.
  • Z means a cylindrical hub bore.
  • On the pump side: hub length 28 mm and bore diameter 45 mm.
  • On the motor side: hub length 42 mm and bore diameter RA mm.

Key features of the RA 38-Z45/28-Z45/42

  • Flexible shaft connection between a KF gear pump and an IEC motor.
  • Pump-side bore 45 mm and motor-side bore RA mm, both cylindrical.
  • Hub lengths of 28 mm (pump side) and 42 mm (motor side).
  • Hub material: aluminium.
  • Listed for IEC motor frame 160 M/L 45 and KF nominal sizes 100 to 200.

Because the pump-side and motor-side bores are given separately, the RA 38-Z45/28-Z45/42 can be matched to a motor with a different shaft diameter than the pump shaft without a sleeve or reducer. That is why the catalog lists several RA and RG codes for the same pump size, one per motor frame.

Technical specifications for the RA 38-Z45/28-Z45/42

Parameter Value
Designation RA 38-Z45/28-Z45/42
Product type Flexible shaft coupling for KF gear pumps
Hub material Aluminium
Coupling size 38
Hub length, pump side (l1) 28 mm
Bore, pump side (d1) 45 mm
Hub length, motor side (l2) 42 mm
Bore, motor side (d2) RA mm
Hub bore form Cylindrical
KF nominal sizes 100 to 200
IEC motor frame sizes 160 M/L 45

The values are taken from the coupling table in the KF 2.5 to 3150 catalog. Torque rating, elastomer hardness and permitted misalignment are not stated in that table and are therefore not given here.

Typical applications in Oman and the GCC

KF gear pumps move lubricating oils, fuels and other liquids across many industries, and the catalog stresses their low noise and low pulsation. In Oman and the wider GCC such pump units serve lube-oil and fuel transfer, oil and gas utilities, power generation, water and wastewater treatment dosing and general factory duties. The RA 38-Z45/28-Z45/42 is the coupling that lets these units be driven by standard IEC motors, and it is among the first parts replaced during overhaul of a drive train.

Selection and compatibility notes for the RA 38-Z45/28-Z45/42

  • Check the KF nominal size: the RA 38-Z45/28-Z45/42 is listed for sizes 100 to 200.
  • Check the motor frame: 160 M/L 45.
  • Measure the existing shaft ends; the bores must read 45 mm and RA mm.
  • Pair the coupling with the bellhousing from the same catalog page for the same pump and motor combination.
  • If your motor shaft is different, choose another coupling code from the table rather than boring the hub.

Remember that a flexible coupling compensates only small misalignments; the pump and motor still need to be aligned carefully, and the bellhousing is what holds that alignment in place.

Installing, commissioning and maintenance the RA 38-Z45/28-Z45/42

Clean the shafts and the bores, fit the hubs with the keys that belong to the shaft ends, and secure them with the set screws. Slide the pump and motor together inside the bellhousing, leave the axial gap recommended by the coupling supplier, and rotate by hand to confirm free running. Check alignment before starting and again after the first hours of operation.

Inspect the elastic element for hardening, cracks or wear during every pump seal inspection. A coupling that rattles at start-up or shows rubber dust inside the bell is due for replacement. Keep the designation RA 38-Z45/28-Z45/42 in the spare-parts list so that a replacement can be requested without dismantling the unit first.

Related KRACHT products and ordering notes

The RA 38-Z45/28-Z45/42 is normally ordered together with a PT bellhousing for the same motor frame and a KF gear pump of the nominal size stated above. The accessory tables in the KF catalog are arranged in the same way, so a matching set can be assembled by reading across the rows. Send the pump type key, the motor frame and the quantity with your enquiry.

KRACHT RA 38-Z45/28-Z45/42 vs Other KRACHT RA Coupling for KF Gear Variants

Pick this variant when 38-Z45/28-Z45/42 is what your sizing calculation or the installed nameplate calls for. Neighbouring variants in the same family share the mounting concept and most accessories, so the difference that matters on site is exactly that rating.

Variant Distinguishing detail
KRACHT RA 38-Z45/28-Z45/42 Coupling for KF Gear Pump (this page) 38-Z45/28-Z45/42
KRACHT RA 42-Z50/38-Z50/55 Coupling for KF Gear Pump 42-Z50/38-Z50/55

Frequently asked questions

These answers cover the questions most often raised about the RA 38-Z45/28-Z45/42.

  • What is the RA 38-Z45/28-Z45/42? The RA 38-Z45/28-Z45/42 is a flexible shaft coupling from the KRACHT accessory range, listed in the KF catalog for KF nominal sizes 100 to 200.
  • What are the bore sizes of the RA 38-Z45/28-Z45/42? The pump-side bore is 45 mm and the motor-side bore is RA mm, both cylindrical, with hub lengths of 28 mm and 42 mm respectively.
  • Which motor does the RA 38-Z45/28-Z45/42 suit? The catalog assigns it to IEC motor frame 160 M/L 45 together with KF nominal sizes 100 to 200.
  • What material is the hub of the RA 38-Z45/28-Z45/42? The first two letters of the designation indicate the hub material; in this code it is aluminium.
  • Do I also need a bellhousing with the RA 38-Z45/28-Z45/42? Normally yes. The coupling runs inside a PT bellhousing that joins the pump to the motor flange; the catalog lists matching codes on the page before.

Documents and quotation

The KF 2.5 to 3150 catalog with the coupling table is offered as a datasheet on this page. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. For a quotation on the RA 38-Z45/28-Z45/42, send an RFQ with the part number, the pump type key, the motor frame and the quantity, and we will confirm availability.

Datasheets & Documents
  • PDF Datasheet KRACHT RA 38-Z45/28-Z45/42 Coupling for KF Gear Pump Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

KRACHT is the German maker of gear pumps, gear flow meters, hydraulic valves, motors and cylinders. The company was entered in the trade register in 1911 as Hillebrand & Kracht OHG and is based in Werdohl, in the Sauerland region of Germany. For most of its history it was a medium-sized family company; in January 2024 it became part of the Atlas Copco Group, in the Power and Flow division.

Seven Star LLC lists KRACHT pumps, flow meters, valves and hydraulic motors, and sources them by type key for machinery and marine users in Oman.

KRACHT company profile

Founded 1911, registered as Hillebrand & Kracht OHG
Headquarters Werdohl, North Rhine-Westphalia, Germany; in today's premises since 1971
Ownership Atlas Copco Group since January 2024 (Power and Flow division, Power Technique business area); previously a family company
Size About 440 employees and revenue of about EUR 72 million in 2022, as reported by Atlas Copco
Subsidiaries USA, China and Hungary (KRACHT Hidraulik Kft.)
Product families External gear pumps for lube oil, fuel and process duty, VC and VZ gear flow meters, pressure and flow control valves, hydraulic motors and cylinders

Milestones

  • 1911: Hillebrand & Kracht OHG is entered in the trade register.
  • 1971: The company moves into its present premises in Werdohl.
  • 1992: A gear manufacturer in Hungary is acquired, today KRACHT Hidraulik Kft.
  • 2023–2024: Atlas Copco agrees to buy KRACHT in December 2023 and completes the deal in January 2024.

KRACHT pumps, flow meters and valves listed

The listing follows four product groups, pumps, fluid measurement, valves and drives:

  • Pump technology: KF gear pumps for transfer of lubricating and other fluids, the KF-F version for fuels, and KP high pressure gear pumps
  • Fluid measurement technology: gear type flow meters such as the VCA in aluminum
  • Valve technology: SPV and SPVF pressure relief valves, the DBD directly controlled poppet valve, HV and HVF pilot operated valves and the DV B hydraulically pilot controlled valve
  • Drive technology: KM hydraulic gear motors

Where KRACHT equipment is used

KRACHT equipment serves the marine, renewable energy, process technology and hydraulics industries. In practice that means lube oil and fuel oil transfer on engines, gearboxes and compressors, oil supply units, and metering of oils, resins, paints and other viscous media with gear flow meters in dosing and test bench systems. Enquiries from the GCC are mostly for a KRACHT pump or valve fitted to an imported machine or a ship's auxiliary system.

KRACHT products we list

Family Examples
Pumps BT / BTH Low-Speed Gear Pump, DT DuroTec Gear Pump for Abrasive Fluids, KD1 Gear Metering Pump, KF 0 Stainless Steel Process Gear Pump, KF Series Modular Gear Pump, KF-F Fuel Gear Pump Series, KF80RF2-D15 Gear Pump, KM Series Hydraulic Gear Motor and 2 more
Flowmeters Fluid Measurement Technology Series, SVC Screw Type Flow Meter, TM Turbine Flow Meter, VC 0.01 Micro Gear Type Flow Meter, VC Gear Type Flow Meter, VCA Aluminum Gear Flow Meter, VCM Gear Flow Meter
Safety Relief Valves DBD Directly Controlled Poppet Valve, DV B Hydraulically Pilot Controlled Valve, HV/HVF Pilot Operated Slide Valve, SPV 10 L1G 1 A 12 Pressure Relief Valve, SPV/SPVF Directly Controlled Slide Valve, Valve Technology Series
Hydraulic Valves & Components CNL Hydraulic Cylinder, DV S Pressure Stage Control Valve
Gear Units & Reducers Drive Technology Series

Ordering KRACHT parts: what we need

KRACHT products carry a type key on the nameplate that encodes size, direction of rotation, shaft end, housing and seal material, connections and special numbers. An example from this page is SPV 10 L1G 1 A 12. Send the complete key and the serial or order number shown with it. If the plate is damaged, send the fluid and viscosity, flow rate, operating pressure and temperature, drive speed, port type and size, and photos with main dimensions. For KRACHT flow meters add the measuring range and the pickup or electronics required. We compare the key with KRACHT documentation and supply the manufacturer's data sheet on request.

Frequently requested KRACHT models: KRACHT Pump Technology Series.

Facts checked against KRACHT company literature and Atlas Copco's acquisition announcements, October 2026.

FAQ

Questions about the KRACHT RA 38-Z45/28-Z45/42 Coupling for KF Gear Pump

Answers from our engineering team on installation, compatibility and integration.

01What is the RA 38-Z45/28-Z45/42?
The RA 38-Z45/28-Z45/42 is a flexible shaft coupling from the KRACHT accessory range, listed in the KF catalog for KF nominal sizes 100 to 200.
02What are the bore sizes of the RA 38-Z45/28-Z45/42?
The pump-side bore is 45 mm and the motor-side bore is RA mm, both cylindrical, with hub lengths of 28 mm and 42 mm respectively.
03Which motor does the RA 38-Z45/28-Z45/42 suit?
The catalog assigns it to IEC motor frame 160 M/L 45 together with KF nominal sizes 100 to 200.
04What material is the hub of the RA 38-Z45/28-Z45/42?
The first two letters of the designation indicate the hub material; in this code it is aluminium.
05Do I also need a bellhousing with the RA 38-Z45/28-Z45/42?
Normally yes. The coupling runs inside a PT bellhousing that joins the pump to the motor flange; the catalog lists matching codes on the page before.