Brand:

IMI STI SR-04-S1-00-S-22222 Quick Exhaust Valve 1/4 in.

Description

IMI STI SR-04-S1-00-S-22222 overview

The IMI STI SR-04-S1-00-S-22222 is the model code of the IMI STI SR quick exhaust valve listed in the manufacturer’s instruction manual. The SR is used with solenoid valves or positioners wherever a quick opening or closing function is required. It increases the actuator speed without hunting because the air to be discharged is exhausted to atmosphere directly from the large derivative unit outlet and not through the positioner.

The code reads as size 04 (1/4 inch), material S1 (stainless steel 316, copper free execution), painting 00 (not painted), temperature letter S (-20 to +70 degC) and connection code 22222, meaning supply 1, supply 2, actuator 1, actuator 2 and exhaust connections are all 1/4 inch. The manual lists this model with the part number 79252.

The IMI STI SR-04-S1-00-S-22222 model code is taken from the existing-products table of the manufacturer’s instruction manual, which lists each model with an IMI STI part number (79252). Quoting the full code matters because the same family is built in several sizes, materials, temperature ranges and options, and only the complete code identifies the exact unit.

Key features of the SR-04-S1-00-S-22222

  • Quick exhaust for fast actuator opening or closing
  • Air leaves the actuator through the large derivative unit outlet instead of through the positioner
  • Two supply and two actuator ports plus an exhaust port, all 1/4 inch
  • Stainless steel 316 copper free body
  • Two units can be installed in parallel for very high actuator speed
  • Working pressure 3 to 7 bar with design pressure 12 bar
  • CV out maximum 1.6
  • Lifetime stated as 30 years

SR-04-S1-00-S-22222 technical specifications

The table below lists the data for the SR-04-S1-00-S-22222 taken from the manufacturer’s published documents. Values that are not stated by the manufacturer are left out on purpose.

Model code SR-04-S1-00-S-22222
IMI STI part number (manual) 79252
Size 1/4 inch
Body material Stainless steel 316, copper free execution
Painting Not painted (code 00)
Temperature code S: -20 to +70 degC
Connections Supply 1, supply 2, actuator 1, actuator 2 and exhaust: all 1/4 inch
Working pressure 3 bar minimum, 7 bar maximum
Design pressure 12 bar
CV out maximum 1.6
Extended temperature (family) -60 to +100 degC
Storage temperature (family) -40 to +95 degC
Gasket material (family) NBR, Viton or fluorosilicone
Fluid Air
Lifetime 30 years

The SR is listed in one size, 1/4 inch, and the model selection offers aluminum or stainless steel bodies, painted finishes and other temperature letters; confirm availability before ordering.

Typical applications in oil and gas, utilities, water and manufacturing

Refineries, petrochemical units and general manufacturing plants apply the SR-04-S1-00-S-22222 to speed up small pneumatic actuators by exhausting them directly. Because the exact configuration affects performance, engineers normally confirm the supply pressure, temperature range and connection arrangement against the nameplate of the existing equipment before ordering.

In oil and gas facilities in Oman and across the GCC, the SR-04-S1-00-S-22222 is typically found on small double acting actuators needing a fast stroke. Pneumatic accessories decide how fast and how stably an actuator strokes, so they are specified together with the actuator and positioner. Production, gathering and processing sites in the desert and offshore installations value equipment whose behaviour is well documented and whose spare parts can be identified by a clear part number.

Power and desalination plants use the SR-04-S1-00-S-22222 where reliable control or safety stroking is needed on steam, feedwater, bypass and cooling circuits. Utilities and water treatment operators also use this type of equipment for dampers, control valves and isolation valves driven by instrument air, and the SR-04-S1-00-S-22222 helps maintenance teams keep like-for-like replacements on the shelf.

Selection and compatibility notes for the SR-04-S1-00-S-22222

The SR-04-S1-00-S-22222 has a single 1/4 inch size, so it suits small and medium actuators. For larger volumes the same manufacturer offers the SRQ quick exhaust valve in 3/8 inch and 1 inch sizes.

The five-port connection code 22222 provides two supply connections and two actuator connections, which suits double acting actuators. The manual recommends tubing of 8 mm or 3/8 inch for pilot lines and tubing larger than the product thread size for supply and exhaust lines.

Check the supply medium and pressure, the ambient temperature range and any hazardous-area requirement before ordering the SR-04-S1-00-S-22222. If a certificate or approval is needed for the installation in Oman or elsewhere in the GCC, state it in the request so that it can be checked against the manufacturer’s documents rather than assumed.

Installation and commissioning of the SR-04-S1-00-S-22222

Install the SR-04-S1-00-S-22222 in the pneumatic circuit using the connection layout of its model code. Use clean instrument air, support the tubing so that no load acts on the body, and check all joints for leakage. Adjust any setting screw gradually, measure the actuator stroking time, and lock the screw once the required time is reached.

The manual recommends tubing of 8 mm or 3/8 inch for pilot lines and tubing larger than the product thread size for supply and exhaust lines. Keep exhaust lines free of restrictions that the design does not intend, because a blocked exhaust changes the stroking time.

Record the model code, the part number and the final settings of the SR-04-S1-00-S-22222 on the commissioning sheet so that future maintenance and any reorder can refer to the same data.

Maintenance and service for the SR-04-S1-00-S-22222

Plan periodic inspection of the SR-04-S1-00-S-22222 according to the instruction manual of the manufacturer. Typical checks are leakage at joints, condition of the air supply, mechanical wear or contamination, and confirmation that the setting still gives the required response.

Poor air quality is the most common cause of pneumatic accessory problems, so keep filter regulators and dryers serviced upstream of the SR-04-S1-00-S-22222. Replace elastomer parts only with the materials specified for the application, and do not modify the unit in the field.

When a unit fails, identify the exact model code and part number from the nameplate before ordering a replacement. For the SR-04-S1-00-S-22222 this removes the risk of receiving a body with a different size, material or temperature range.

Related products and ordering notes for the SR-04-S1-00-S-22222

Items that are commonly specified together with the SR-04-S1-00-S-22222 include: SRQ quick exhaust valve, ER exhaust regulator, FCV flow control valve, CRP-3/M positioner. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer; product names and part numbers are used only to identify the items offered.

Lead times, availability and alternatives depend on the stock position at the time of the request. If the SR-04-S1-00-S-22222 is not the exact configuration needed, send the nameplate data and we will suggest the closest match from the manufacturer’s published model selection.

SR-04-S1-00-S-22222 frequently asked questions

What does the SR-04-S1-00-S-22222 do? It is a quick exhaust valve used with solenoids or positioners to speed up an actuator by exhausting its air directly through the large outlet.

What does 22222 mean in the code? The model selection defines it as supply 1, supply 2, actuator 1, actuator 2 and exhaust connections, with legend digit 2 meaning 1/4 inch.

What is the manufacturer part number? The instruction manual lists the model SR-04-S1-00-S-22222 with the part number 79252.

What is the pressure range? The technical data list a working pressure of 3 bar minimum to 7 bar maximum, with a design pressure of 12 bar.

How do I order the SR-04-S1-00-S-22222? Send the part number SR-04-S1-00-S-22222 with the quantity and any special requirement to Seven Star LLC and we will reply to your RFQ.

Documents and quotation

The manufacturer’s manual for the SR-04-S1-00-S-22222 is available from Seven Star LLC on request and is listed on this page for download. It should be read together with the nameplate data of the installed equipment.

To request a quotation, send an RFQ with the part number SR-04-S1-00-S-22222, the quantity, the required delivery location in Oman or the GCC, and any special requirement such as certification or documentation. We will reply with availability and commercial terms.

Datasheets & Documents
  • PDF Manual IMI STI SR-04-S1-00-S-22222 Quick Exhaust Valve 1/4 in. Manual Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

IMI STI is an Italian manufacturer of pneumatic, hydraulic and direct-gas valve actuators, valve positioners and actuator accessories. It is based in Levate, near Bergamo, and is part of the IMI plc group (IMI Process Automation).

Seven Star LLC is an independent supplier in Muscat. We list IMI STI positioners, actuators and switches for valve automation in Oman and the GCC and source them by full model code.

IMI STI company profile

Established 1960, in Gorle (Bergamo), Italy
Manufacturing site Levate (Bergamo), Italy, since 2014. The plant is about 15 km from the original Gorle site.
Group IMI plc, Process Automation division. STI S.r.l. is the legal entity and IMI STI is the brand name.
Product families Quarter-turn Scotch yoke actuators, linear actuators, lift-and-turn actuators, stepper actuators, valve positioners, limit switches, pressure switches and pneumatic accessories
Typical duty Emergency shutdown and isolation valves, anti-surge valves, turbine bypass and steam valves, dampers and process control valves
Industries Oil and gas, power, petrochemicals, process industries, water and metals

Milestones

  • 1960: STI is founded in Gorle, Bergamo.
  • 2002: IMI plc acquires STI, according to the company's own literature.
  • 2014: Manufacturing moves to the new plant in Levate, about 15 km from Gorle.

IMI STI product series

Series Type Key published data
RTC Pneumatic Scotch yoke quarter-turn actuator Up to 12 bar supply, -30 to +100 °C ambient, 90° rotation; single-acting, double-acting or spring-return; air, nitrogen, sweet or sour gas; ISO 5211 mounting; SIL 3, ATEX, PED, IP66/67M
RTQ High-torque pneumatic Scotch yoke actuator For large ball, plug and butterfly valves in harsh environments; canted or symmetrical yoke
RTQD / RTQH Direct-gas and hydraulic Scotch yoke actuators RTQD: gas-over-oil, operating pressure up to 114 bar, -20 to +100 °C; RTQH: hydraulic version for sites with a hydraulic power supply
SC/V, SC Pneumatic linear actuators For globe and gate valves (SC/V) and for dampers (SC); SC/VLT is the lift-and-turn version
SHP Smart high-performance positioner HART 7, self-tuning, Cv up to 2.3, 2.5 to 10.5 bar supply, ATEX and IECEx, IP66 aluminium or stainless steel housing
SHP-SIS Safety positioner IEC 61508:2010 up to SIL 3, built-in partial stroke testing, -55 to +85 °C ambient
FasTrak FT, QuickTrak Smart digital positioners and valve control systems Digital positioning with valve diagnostics
SA/CL Analog positioner Analog positioner for control valve actuators
2130 Limit switch box Position feedback for rotary valve actuators

Scotch yoke actuators give their highest torque at the start and end of the stroke. That is where a ball, plug or butterfly valve needs the most break-out and seating torque, so a Scotch yoke can be smaller than a rack-and-pinion actuator for the same valve. A canted yoke moves the torque peak toward one end of the stroke, for valves whose highest demand is when they close. A symmetrical yoke gives the same curve in both directions.

Where IMI STI products are used

In the GCC, IMI STI actuators and positioners appear mostly on emergency shutdown (ESD) and blowdown valves, compressor anti-surge valves, steam turbine bypass valves and large dampers in oil and gas, refining, petrochemical and power plants. On shutdown valves the SHP-SIS positioner adds partial stroke testing, so the valve can be proven to move without taking the plant down.

Ordering and replacement: what we need

For an actuator, send the full model code from the nameplate, the valve type and size, required torque or thrust with safety factor, supply medium and pressure, fail position (fail-close, fail-open or fail-last), stroke time, mounting flange (ISO 5211) and stem adaptor, ambient temperature range and the hazardous-area certification required. For a positioner, send the model, actuator type, signal (4-20 mA, HART), whether partial stroke testing or a SIL rating is needed, and the cable entry thread. When a series has been superseded, we quote the successor that IMI names in its documentation and point out any differences in mounting or signal.

Facts checked against IMI Process Automation product pages and published company history, October 2026.

FAQ

Questions about the IMI STI SR-04-S1-00-S-22222 Quick Exhaust Valve 1/4

Answers from our engineering team on installation, compatibility and integration.

01What does the SR-04-S1-00-S-22222 do?
It is a quick exhaust valve used with solenoids or positioners to speed up an actuator by exhausting its air directly through the large outlet.
02What does 22222 mean in the code?
The model selection defines it as supply 1, supply 2, actuator 1, actuator 2 and exhaust connections, with legend digit 2 meaning 1/4 inch.
03What is the manufacturer part number?
The instruction manual lists the model SR-04-S1-00-S-22222 with the part number 79252.
04What is the pressure range?
The technical data list a working pressure of 3 bar minimum to 7 bar maximum, with a design pressure of 12 bar.
05How do I order the SR-04-S1-00-S-22222?
Send the part number SR-04-S1-00-S-22222 with the quantity and any special requirement to Seven Star LLC and we will reply to your RFQ.