Brand:

Keyence LV-NH300 Laser Sensor Head, Area Thrubeam

Description

LV-NH300: what this LV-N series sensor is and how its code reads

LV-NH300 is a Keyence LV-N series product, listed by the maker as: Sensor head, Area Thrubeam, High performance. The LV-N series is a digital laser sensor system. A DIN-rail amplifier works with small laser sensor heads that project a fine visible-red spot or a narrow beam for detecting minute parts. Seven Star LLC supplies LV-NH300 in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.

LV-NH300 is the area thrubeam head, a transmitter and receiver pair.

LV-NH300 detects within a 30 mm wide area at distances up to 2000 mm in MEGA mode. Because the beam covers an area, the position of the object across the beam matters less.

Because LV-NH300 is a head, many electrical details such as output polarity, response time and supply voltage belong to the LV-N amplifier it is connected to rather than to the head. That is why the table above is short: it states the optical behaviour, laser classification, temperature range, materials and weight of the head itself. When you request a quotation, name the amplifier you plan to use so the combination can be checked from the maker’s documents, and keep in mind that heads are available in several optical styles, so the model code decides the beam pattern and detecting distance.

LV-NH300 technical specifications

Parameter Specification
Manufacturer / part number Keyence / LV-NH300
Product description Sensor head, Area Thrubeam, High performance
Type Area thrubeam, High performance
FDA (CDRH) Part 1040.10 Class 1 Laser Product
Light source Visible red semiconductor laser, Wavelength: 660 nm
Detecting distance MEGA: 2000 mm (Detecting area: 30 mm )
Environmental resistance Ambient temperature: -10 to +55 °C (No freezing)
Relative humidity 35 to 85 % RH (No condensation)
Material Case: Glass reinforced plastic
Lens cover Transmitter: Glass, Receiver: Polyarylate
Weight Approx. 95 g

Values in the table are taken from the maker’s model page for LV-NH300. Treat them as nominal and confirm the exact conditions in the instruction manual before final design.

How the sensing principle behind LV-NH300 works

The amplifier drives a visible red semiconductor laser in the sensor head and measures the returned light. A laser beam can be focused into a very small spot, so the head can detect tiny objects or small steps that would pass unseen under a wide LED beam.

Response-time modes and an interference-prevention function let several heads work side by side. The Type row in the table tells which amplifier or head version you are looking at.

Where LV-NH300 fits: related LV-N series parts

Amplifiers and sensor heads are ordered separately; the LV-NH family covers spot-reflective, thrubeam and area styles.

The LV-N series range includes the following part numbers, which are listed for cross-reference: LV-N11N, LV-N12N, LV-N11CN, LV-N12CN, LV-N11MN, LV-N11P, LV-N12P, LV-N11CP, LV-N12CP and LV-N10 amplifiers with the LV-NH and LV-S sensor heads. Whether a particular combination is compatible should be confirmed from the maker’s documents. Closely related models from the same family that you may also want to compare include LV-N11N, LV-NH37.

Selecting LV-NH300: ordering checklist

  • Amplifier or sensor head, as the table indicates.
  • Required spot size or detecting area.
  • Detecting distance in the chosen response mode.
  • NPN or PNP, and cable or M8 connector.
  • Laser class for the safety assessment.
  • Ambient temperature.

For LV-NH300 specifically, confirm the output type, the connection style and the rated distance shown in the table above against the real installation drawing before placing an order.

Installing and maintaining LV-NH300

Mount heads on a stable bracket, align the beam by eye with the visible red spot, and then use automatic set-up with the target present. Never look into the beam path.

Wipe the lens cover with a soft cloth and re-run set-up after any head change. Keep one spare of each head.

Typical applications of LV-NH300 in Oman and the GCC

Laser sensors like these are used for minute-part detection in electronics assembly, small-component feeding and pharmaceutical packaging in Oman and the GCC.

Falling or randomly positioned parts. Extra heat, dust and humidity are normal in the region, so check the ambient temperature and enclosure rows in the table against the real mounting location, including direct sunlight on outdoor skids.

LV-N series models compared with LV-NH300

The table lists the LV-N series models in our current range with the maker’s own description, to help you see how LV-NH300 differs from its neighbours.

Model Maker description
LV-NH300 Sensor head, Area Thrubeam, High performance
LV-N11N Amplifier, Cable, Main unit, NPN
LV-NH37 Sensor head, Spot Reflective, Ultra-small beam spot

Information to send with your LV-NH300 RFQ

  • Exact part number: LV-NH300 (and quantity, including any matching transmitter, receiver, reflector or head).
  • Output polarity required by your PLC input card (NPN or PNP).
  • Cable length or connector type and the mounting method.
  • Ambient conditions: temperature, washdown, dust and direct sunlight.
  • Project reference, delivery location in Oman or the GCC and required lead time.
  • Any related items needed, such as brackets, cables, reflectors or a mating amplifier.

Storage, handling and spares for the Keyence LV-NH300

Keep the Keyence LV-NH300 in its original packaging until installation, and store it indoors in a dry place without condensation. Protect connectors and cable ends from dust and moisture. In hot GCC warehouses, check that the storage temperature stays inside the range given in the manufacturer datasheet before the unit is installed.

  • Check the article number and connection type against the drawing before mounting.
  • Use the mounting accessories and connection cables recommended for the device, and route cables away from power wiring.
  • Keep at least one spare unit of each type used on critical machines, so that a failed device can be swapped quickly.
  • Record the device type, firmware version where relevant, and parameter settings, so that a replacement can be set up the same way.

When you order the Keyence LV-NH300, include the matching cables, connectors or mounting parts in the same RFQ. This avoids delays at commissioning when a small accessory is missing.

Documents and quotation

Send us the part number LV-NH300 and we will confirm available documents, including the maker’s datasheet and instruction manual where we can provide them. Prices are quoted per request and are not shown on this page.

Seven Star LLC is an independent supplier in Muscat serving Oman and the GCC. We are not affiliated with the manufacturer, and we quote against your RFQ with delivery and lead time confirmed in the quotation.

Other Models in the Keyence Lv N Range

Seven Star LLC supplies models from the Keyence Lv N range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Keyence LV-N11N Digital Laser Amplifier, Main Unit, NPNPhotoelectric SensorsView details
Keyence LV-NH37 Laser Sensor Head, Spot ReflectivePhotoelectric SensorsView details
Keyence LV-NH300 Laser Sensor Head, Area ThrubeamPhotoelectric SensorsYou are viewing this model
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Keyence is a Japanese maker of sensors, measuring instruments and machine vision, founded in 1974 by Takemitsu Takizaki and headquartered in Osaka. It sells directly to factories and makes photoelectric and laser sensors, code readers, vision systems, measurement systems and microscopes.

Seven Star LLC sources and supplies Keyence sensors and code readers for machine builders and maintenance teams in Oman and the GCC.

Keyence company profile

Founded 1974, Japan
Founder Takemitsu Takizaki
Headquarters Osaka, Japan
Sales model Direct sales
Product families LR-Z and LR-W laser and photoelectric sensors, SR-X code readers, IV and CV-X vision systems, LJ-X laser profilers

Keyence series listed

Three series appear on this page. The LR-Z is a self-contained CMOS laser sensor. Keyence describes it as detecting by distance and by received light, with one-button teaching, a stainless steel body rated IP68/69K and a range of up to 500 mm depending on the model; the LR-ZB250CP is the listed type. The LR-W500C is a full-spectrum reflective photoelectric sensor from the LR-W series. The SR-X100 is an autofocus 2D code reader.

Keyence products we list

Family Examples
Photoelectric Sensors LR-W500C Full-Spectrum Reflective Photoe…
Laser Distance, LiDAR & Radar Sensors LR-ZB250CP LR-Z Series Self-Contained CM…
Machine Vision SR-X100 Autofocus 2D Code Reader

Ordering Keyence sensors: what we need

Keyence type codes are short but exact. Send the complete model, such as LR-ZB250CP, because the letters at the end decide the output type and the connection. Remember that many Keyence sensors need a separately ordered cable or connector, and code readers need a cable, a power supply and often a mounting bracket. List those items, the cable length, and the communication interface your PLC uses.

Facts checked against Keyence's published company profile, October 2026.

FAQ

Questions about the Keyence LV-NH300 Laser Sensor Head, Area Thrubeam

Answers from our engineering team on installation, compatibility and integration.

01What is Keyence LV-NH300?
LV-NH300 is a Keyence LV-N series product described by the maker as: Sensor head, Area Thrubeam, High performance. Seven Star LLC supplies it in Oman and the GCC as an independent supplier.
02What is the detecting range of LV-NH300?
The datasheet lists 2000 mm in MEGA mode with a detecting area of 30 mm across the beam.
03What laser class is LV-NH300?
The datasheet lists it as a Class 1 laser product under FDA (CDRH) Part 1040.10, using a visible red 660 nm semiconductor laser.
04Does Seven Star LLC supply LV-NH300 in Oman?
Yes, we quote LV-NH300 on request for Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer. Send the part number and quantity with your RFQ and we confirm availability and lead time.
05What should I check before ordering LV-NH300?
Check output polarity, connection style, the rated distance or range in the specification table, the ambient temperature at the installation point and any matching accessories. Send the part number and we will confirm available documents.