Phoenix Contact FL MGUARD RS4004 TX/DTX Security Router

Description

FL MGUARD RS4004 TX/DTX: compact security router with 4-port switch and DMZ

The FL MGUARD RS4004 TX/DTX is a 45 mm wide DIN-rail security router that combines a firewall, NAT, a managed four-port switch and a DMZ port. It is designed for machine builders and plant operators who need to protect a single machine or cell and want a compact device with several local ports. Order number 2701876 does not include VPN, which is available in the sibling version with VPN in its name. Seven Star LLC supplies the FL MGUARD RS4004 TX/DTX in Oman and the GCC as an independent supplier in Muscat.

The name FL MGUARD RS4004 signals the RS family with four switch ports, TX means copper twisted-pair interfaces and DTX adds the DMZ port. The speed is 10/100 Mbps.

Technical specifications of the FL MGUARD RS4004 TX/DTX

Parameter Specification
Manufacturer / part number Phoenix Contact FL MGUARD RS4004 TX/DTX (order no. 2701876)
Function Security router with managed 4-port switch, firewall, NAT and DMZ
Transmission speed 10/100 Mbps
Firewall Configurable stateful inspection firewall with full scope of functions
Firewall throughput Max. 130 Mbps in router mode, default rules, bidirectional
Routing functions Standard routing, NAT, 1:1 NAT, port forwarding
Supply voltage 24 V DC, redundant, range 11 to 36 V DC
Current consumption Max. 180 mA with unloaded outputs
Ambient temperature -20 to 60 °C
Dimensions 45 x 130 x 120.6 mm (W x H x D)

How the FL MGUARD RS4004 TX/DTX isolates a machine network

The device has one external (WAN) port, a managed internal switch with four ports and a DMZ port. Machine equipment is connected to the internal switch; the WAN port goes to the plant network, and servers that must be reached by both sides can sit on the DMZ. The firewall inspects traffic between zones, and NAT allows identical machine networks to be copied from machine to machine with the same internal addresses.

Compared with a gigabit unit, the throughput limit of 130 Mbps in router mode is sufficient for typical machine control traffic such as PLC data, HMI and remote service, but it is not meant for large video streams.

Where the FL MGUARD RS4004 TX/DTX fits

This model fits at the entrance of a machine or skid cabinet, where a service engineer connects from a remote location. Because the supply range of 11 to 36 V DC is wide and a redundant feed is possible, the router can be powered from 12 V or 24 V systems.

For gigabit uplinks and SFP fibre links, the FL MGUARD GT/GT is more suitable; for plain switching without security, an unmanaged FL SWITCH such as the 1008N is enough.

Selection and ordering checklist for the FL MGUARD RS4004 TX/DTX

  • Number of machine devices on the internal switch (four ports).
  • Need for a DMZ for servers or service access.
  • Traffic against the 130 Mbps router throughput.
  • Whether VPN is required (separate version or licence).
  • Supply: 11 to 36 V DC.
  • Cabinet temperature up to 60 °C.

Installation, commissioning and maintenance of the FL MGUARD RS4004 TX/DTX

Snap the device on a 35 mm rail, connect the DC supply and attach the cables to the WAN, LAN and DMZ ports. Configure through the web interface, setting addresses, firewall rules and NAT according to the network plan.

Document the rules, back up the configuration and update the firmware according to your security process. Label cables clearly so that a field engineer does not plug the WAN cable into a LAN port by mistake.

Typical applications in Oman and the GCC

In Oman and the GCC, machine builders and operators use compact security routers for packaged equipment such as compressor skids, water treatment packages and test benches, where the vendor needs controlled remote access. A firewall at the machine boundary protects the controller while the DMZ port allows data logging servers.

The 45 mm width fits crowded cabinets, and the wide supply range suits both 12 V and 24 V sites.

One practical benefit of NAT in this device is machine duplication: several identical skids can be built with the same internal addresses, and each one is given a unique external address when it reaches the site. That saves re-addressing the PLC and HMI of each machine and avoids address conflicts on the plant network. Keep an address list for every machine with its internal and external address, the firewall rules applied and the firmware version, so that a spare unit can be configured quickly after a failure.

Comparison with related devices

Device Distinguishing data
FL MGUARD RS4004 TX/DTX (this part) 10/100 Mbps, 4-port switch, DMZ, 130 Mbps
FL MGUARD RS4004 TX/DTX VPN Version with VPN (separate order number)
FL MGUARD GT/GT Gigabit, SFP combo, 417 Mbps
FL NAT 2008 NAT router for machine network duplication

Information to send with an RFQ for the FL MGUARD RS4004 TX/DTX

  • Part number FL MGUARD RS4004 TX/DTX and quantity.
  • Number of devices behind it.
  • DMZ and VPN needs.
  • Supply voltage.
  • Cabinet temperature.

Site conditions in Oman for the FL MGUARD RS4004 TX/DTX

Control cabinets in Gulf plants often run hot, because many sit in outdoor kiosks or in rooms where air conditioning is not always reliable. Before you finalise the FL MGUARD RS4004 TX/DTX, check the permitted ambient range and any derating stated by the manufacturer against the real temperature inside your panel, and leave the recommended spacing around the device so that heat can escape. Long cable runs between the field and the marshalling cabinet are common on large sites, so confirm the signal types, wiring limits and earthing arrangement early in the design.

It also helps to standardise on a small number of part numbers across a project. Keeping a few spare FL MGUARD RS4004 TX/DTX units on site in Oman shortens recovery time after a fault, and documenting configuration settings makes replacement faster for the maintenance team.

Documents and quotation

Send us the part number FL MGUARD RS4004 TX/DTX and the quantity you need, and we will confirm which official documents are available for this item. Seven Star LLC is an independent supplier in Muscat and quotes for projects across Oman and the GCC; we do not act on behalf of the manufacturer.

Please also tell us the delivery location and the project timeline so that availability can be checked before you commit to a schedule.

Other Models in the Phoenix Mguard Range

Seven Star LLC supplies models from the Phoenix Mguard range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Phoenix Contact FL MGUARD GT/GT Gigabit Security RouterControllers & Data AcquisitionView details
Phoenix Contact FL MGUARD RS4004 TX/DTX Security RouterControllers & Data AcquisitionYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Phoenix Contact FL MGUARD RS4004 TX/DTX Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Phoenix Contact is a German, family-owned manufacturer of electrical connection technology and industrial automation, founded in 1923 in Essen by Hugo Knümann. It began as a sales company, and in 1928 Knümann developed the modular terminal block mounted on a rail, the product the company is still best known for. Phoenix Contact is headquartered in Blomberg, North Rhine-Westphalia.

Seven Star LLC lists Phoenix Contact surge protection, power supplies and safety relays, and sources these components by order number for panel builders and maintenance teams in Oman.

Phoenix Contact company profile

Founded 1923, Essen, Germany, by Hugo Knümann, as Phönix Elektro- und Industrie-Bedarfsgesellschaft
Headquarters Blomberg, Germany
Ownership Family-owned (Eisert and Stührenberg families)
Key invention The modular terminal block on a DIN rail, 1928
Product families CLIPLINE terminal blocks, PCB terminals and connectors, QUINT and TRIO power supplies, relay modules, surge protection, signal conditioners, Ethernet switches and PLCnext controllers

Milestones

  • 1923: Hugo Knümann founds the company in Essen.
  • 1928: The first modular terminal block is developed.
  • Later: Headquarters move to Blomberg, Ostwestfalen-Lippe.

Phoenix Contact parts listed on this page

The TTC-6-2X1-24DC-UT (order number 2906799) is a surge protection device with screw connection for two 24 V DC signal wires that share a common reference potential. The QUINT-PS/1AC/24DC/10 is a single-phase DIN rail power supply delivering 24 V DC at 10 A. The PSR-SCP-24DC/ESP4/2X1/1X2 (order number 2981020) is a single-channel PSR safety relay for emergency stop and safety door monitoring, with two enabling current paths and plug-in screw terminals.

Phoenix Contact products we list

Family Examples
Isolator & Barrier 2906799 TTC-6-2X1-24DC-UT Surge Protector, MACX MCR-EX-SL-RPSSI-I Signal Isolator, MINI MCR-2-UI-UI 3-Way Signal Conditione…, PLT-SEC-T3-230-FM Type 3 Surge Protectio…
Power Modules QUINT-PS/1AC/24DC/10 QUINT Power Supply, QUINT4-PS/1AC/24DC/10 Power Supply, TRIO-PS-2G/1AC/24DC/10 Power Supply, UNO-PS/1AC/24DC/100W Power Supply
Automation Accessories PLC-RSC-24DC/21 Relay Module, PSR-SCP-24DC/ESP4/2X1/1X2 Safety Relay (…

Ordering Phoenix Contact components: what we need

Phoenix Contact items are ordered by a seven-digit order number together with the type designation, both printed on the side of the module. Send both, plus the quantity. If the number is unreadable, send the type text and a photo. For power supplies, state input voltage, output current and whether the unit runs in parallel or with a redundancy module. For buyers in the GCC replacing an older unit, we check the manufacturer's documentation for the listed successor type.

Facts checked against Phoenix Contact's own company history (phoenixcontact.com), October 2026.

FAQ

Questions about the Phoenix Contact FL MGUARD RS4004 TX/DTX Security

Answers from our engineering team on installation, compatibility and integration.

01What does the FL MGUARD RS4004 TX/DTX include?
A firewall, NAT, a managed four-port switch and a DMZ port.
02What is the speed?
10/100 Mbps.
03What is the firewall throughput?
Up to 130 Mbps in router mode with default rules.
04What supply range?
24 V DC nominal, 11 to 36 V DC, redundant.
05Does it include VPN?
This order number does not; the VPN version has a separate part number.