Brand:

IMI STI RTCH Hydraulic Scotch Yoke Actuator

Description

RTCH hydraulic Scotch yoke quarter-turn actuator

The IMI STI RTCH is a range of compact hydraulic quarter-turn actuators for ball, butterfly and plug valves on onshore and offshore plants. A Scotch yoke inside a sealed carbon steel housing converts the straight movement of a hydraulic piston into 90° rotation, and the range covers both on-off and modulating duty across many pressure classes. Seven Star LLC supplies RTCH actuators in Oman and the GCC as an independent supplier in Muscat, quoted against your valve torque, hydraulic pressure and fail-safe requirement.

What the RTCH range covers

RTCH is a series name, not a single ordering code, so the exact unit is defined by torque, configuration and options. The brochure gives these boundaries:

  • Double acting output torque from 40 Nm up to 6,000 Nm, with higher values on request.
  • Spring return (single acting) spring-ending torque from 40 Nm up to 2,500 Nm, higher on request.
  • Canted or symmetrical Scotch yoke mechanism.
  • Operating hydraulic pressure up to 350 bar.
  • ISO 5211 flange connection and a VDI/VDE 3845 NAMUR drive slot for the position indicator.

RTCH technical specifications

Parameter Specification
Manufacturer / part number IMI STI / RTCH series
Actuator type Hydraulic Scotch yoke, quarter turn, double acting or spring return
Operating pressure Up to 350 bar
Supply medium Hydraulic oil as standard; special version for fire resistant fluids on request
Output torque, double acting 40 Nm to 6,000 Nm (higher on request)
Spring ending torque, single acting 40 Nm to 2,500 Nm (higher on request)
Operating temperature -30 °C to 100 °C; high or low temperature design on request
Travel stops Stainless steel, stroke adjustment between 82° and 98°
Housing Carbon steel, no cast, grey or ductile iron and no aluminum parts
Mounting ISO 5211 flange; NAMUR slot per VDI/VDE 3845
Manual override Integral or declutchable handwheel on request
Listed approvals for the series PED 2014/68/EU, ATEX 2014/34/EU, EAC TR TS 012/2011, Machinery Directive 2006/42/EC, IP66/67M per IEC/EN 60529, SIL3 (IEC 61508) as a single device, designed and tested to EN 15714-4

The approvals above are those the manufacturer lists for the series; confirm the marking required for your specific unit when ordering.

How a RTCH Scotch yoke actuator works

Hydraulic oil acts on a piston whose rod drives a sliding block inside a slot of the yoke. As the block moves linearly, the yoke turns the output shaft through a quarter turn. The mechanism is available in canted and symmetrical forms, which give different torque curves over the stroke. A symmetrical yoke gives high torque at both ends of travel, typical for butterfly and some plug valves, while a canted yoke concentrates torque at the end where a ball or seated valve needs the most force to break free and seal.

In the spring-return design the hydraulic cylinder is installed inside the spring, and the spring pack allows compression to be released without removing the cylinder cap and screws. The housing itself is not pressurised, which reduces leakage points. A chromium plated guide bar takes lateral forces, the cylinder is electroless nickel plated to reduce friction and corrosion, and bushings are a high strength bronze alloy, with other materials on application.

Materials and construction details of the RTCH

The brochure’s part list shows a carbon steel housing, cover, guiding block, head and end flanges and cylinder tube, an alloy steel Scotch yoke, guide bar, piston rod and tie rod, a bronze sliding block, steel/bronze/PTFE yoke bushings, NBR O-rings, PTFE/NBR rod seals and stainless steel stop screws. A full stainless steel version is available on request. Multiple certified lifting lugs are placed to balance the centre of gravity, which matters when you handle a multi-hundred-kilogram actuator on a platform or skid.

RTCH system fit and accessories

A hydraulic RTCH actuator is normally part of a pumped or accumulator-based hydraulic power unit with directional valves, filters and often a solenoid or redundant valve manifold. IMI STI states that it designs and produces control panels and cabinets that can be installed on the actuator or supplied loose for remote mounting, which keeps electronics away from heat and vibration. A related hydraulic quarter-turn range from the same maker is the RTQH, and the maker also lists position transmitters and Maxseal solenoid poppet valves among accessories. Ask us to confirm which control package suits your emergency shutdown or modulating duty.

Selection and ordering checklist for the RTCH

  • Valve type, size, pressure class and the break, running and end torque at the worst-case differential pressure.
  • Double acting or spring return, and the fail-safe direction (open or close).
  • Available hydraulic pressure at the actuator, and fluid type, including fire resistant fluids.
  • Symmetrical or canted yoke, based on the valve torque curve.
  • Mounting flange per ISO 5211 and stem coupling dimensions.
  • Ambient temperature range, material option (carbon or stainless steel), and handwheel requirement.
  • Area classification, SIL requirement and certificate list.

Installation and maintenance for RTCH actuators

Lift the actuator only from the certified lugs, mount it on the valve flange with the correct coupling, and set the travel stops within the 82° to 98° range with the valve fully cycled. Flush the hydraulic lines before connecting, and use filtered oil of the grade specified for the unit. In the spring-return version the power module design allows the cylinder seals to be replaced without danger, so plan a seal kit as a routine spare. Check for oil weeping around the rod seal and the cylinder flanges during every shutdown inspection, and exercise ESD valves on a schedule so seals do not stick.

Typical RTCH applications in Oman and the GCC

The sealed carbon steel construction and nickel plated cylinders suit offshore platforms, coastal terminals and onshore pipeline stations where salt, sand and high summer temperatures attack exposed mechanisms. Hydraulic Scotch yoke actuators are typically chosen for large, high-torque valves such as pipeline block valves, wellhead and manifold valves, and emergency shutdown valves in oil and gas, plus large butterfly valves in power and desalination water systems.

Information to send with an RFQ for the RTCH

  • Valve data sheet with torque values or the valve maker and model.
  • Hydraulic supply pressure and fluid.
  • Fail-safe action and required closing time.
  • Hazardous area and SIL documentation needs.
  • Accessories: handwheel, limit switches, control panel.
  • Destination, project name and delivery date.

Documents and quotation

A manufacturer brochure for the RTCH series is attached on this page with the feature list, parts breakdown and technical data.

Tell us the valve, the torque and the hydraulic supply, and Seven Star LLC will propose a suitable RTCH configuration and confirm availability for Oman and the GCC.

Other Models in the Sti Actuator Quarter Turn Range

Seven Star LLC supplies models from the Sti Actuator Quarter Turn range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
IMI STI ARA Axial Rotary Actuator, Compact Quarter-TurnValve ActuatorsView details
IMI STI RTQH Hydraulic Scotch Yoke ActuatorPneumatic & Hydraulic ActuatorsView details
IMI STI RTCH Hydraulic Scotch Yoke ActuatorPneumatic & Hydraulic ActuatorsYou are viewing this model
Datasheets & Documents
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

IMI STI is an Italian manufacturer of pneumatic, hydraulic and direct-gas valve actuators, valve positioners and actuator accessories. It is based in Levate, near Bergamo, and is part of the IMI plc group (IMI Process Automation).

Seven Star LLC is an independent supplier in Muscat. We list IMI STI positioners, actuators and switches for valve automation in Oman and the GCC and source them by full model code.

IMI STI company profile

Established 1960, in Gorle (Bergamo), Italy
Manufacturing site Levate (Bergamo), Italy, since 2014. The plant is about 15 km from the original Gorle site.
Group IMI plc, Process Automation division. STI S.r.l. is the legal entity and IMI STI is the brand name.
Product families Quarter-turn Scotch yoke actuators, linear actuators, lift-and-turn actuators, stepper actuators, valve positioners, limit switches, pressure switches and pneumatic accessories
Typical duty Emergency shutdown and isolation valves, anti-surge valves, turbine bypass and steam valves, dampers and process control valves
Industries Oil and gas, power, petrochemicals, process industries, water and metals

Milestones

  • 1960: STI is founded in Gorle, Bergamo.
  • 2002: IMI plc acquires STI, according to the company's own literature.
  • 2014: Manufacturing moves to the new plant in Levate, about 15 km from Gorle.

IMI STI product series

Series Type Key published data
RTC Pneumatic Scotch yoke quarter-turn actuator Up to 12 bar supply, -30 to +100 °C ambient, 90° rotation; single-acting, double-acting or spring-return; air, nitrogen, sweet or sour gas; ISO 5211 mounting; SIL 3, ATEX, PED, IP66/67M
RTQ High-torque pneumatic Scotch yoke actuator For large ball, plug and butterfly valves in harsh environments; canted or symmetrical yoke
RTQD / RTQH Direct-gas and hydraulic Scotch yoke actuators RTQD: gas-over-oil, operating pressure up to 114 bar, -20 to +100 °C; RTQH: hydraulic version for sites with a hydraulic power supply
SC/V, SC Pneumatic linear actuators For globe and gate valves (SC/V) and for dampers (SC); SC/VLT is the lift-and-turn version
SHP Smart high-performance positioner HART 7, self-tuning, Cv up to 2.3, 2.5 to 10.5 bar supply, ATEX and IECEx, IP66 aluminium or stainless steel housing
SHP-SIS Safety positioner IEC 61508:2010 up to SIL 3, built-in partial stroke testing, -55 to +85 °C ambient
FasTrak FT, QuickTrak Smart digital positioners and valve control systems Digital positioning with valve diagnostics
SA/CL Analog positioner Analog positioner for control valve actuators
2130 Limit switch box Position feedback for rotary valve actuators

Scotch yoke actuators give their highest torque at the start and end of the stroke. That is where a ball, plug or butterfly valve needs the most break-out and seating torque, so a Scotch yoke can be smaller than a rack-and-pinion actuator for the same valve. A canted yoke moves the torque peak toward one end of the stroke, for valves whose highest demand is when they close. A symmetrical yoke gives the same curve in both directions.

Where IMI STI products are used

In the GCC, IMI STI actuators and positioners appear mostly on emergency shutdown (ESD) and blowdown valves, compressor anti-surge valves, steam turbine bypass valves and large dampers in oil and gas, refining, petrochemical and power plants. On shutdown valves the SHP-SIS positioner adds partial stroke testing, so the valve can be proven to move without taking the plant down.

Ordering and replacement: what we need

For an actuator, send the full model code from the nameplate, the valve type and size, required torque or thrust with safety factor, supply medium and pressure, fail position (fail-close, fail-open or fail-last), stroke time, mounting flange (ISO 5211) and stem adaptor, ambient temperature range and the hazardous-area certification required. For a positioner, send the model, actuator type, signal (4-20 mA, HART), whether partial stroke testing or a SIL rating is needed, and the cable entry thread. When a series has been superseded, we quote the successor that IMI names in its documentation and point out any differences in mounting or signal.

Facts checked against IMI Process Automation product pages and published company history, October 2026.

FAQ

Questions about the IMI STI RTCH Hydraulic Scotch Yoke Actuator

Answers from our engineering team on installation, compatibility and integration.

01What is the output torque range of the RTCH?
Double acting versions cover 40 Nm up to 6,000 Nm, with higher values on request. Spring return versions list a spring-ending torque from 40 Nm up to 2,500 Nm.
02What operating pressure does the RTCH use?
Operating pressure is up to 350 bar. Hydraulic oil is the standard medium, and a special version for fire resistant fluids is available on request.
03Is the RTCH available in spring return form?
Yes. It is modular and offered as double acting or spring return. In spring return, the cylinder sits inside the spring and its seals can be replaced without removing the spring.
04How much can the travel stops be adjusted?
The stainless steel travel stops allow fine stroke adjustment between 82° and 98°, around the nominal 90° quarter turn.
05How is the RTCH mounted to a valve?
It has an ISO 5211 flange connection and a VDI/VDE 3845 NAMUR drive slot for the position indicator. Certified lifting lugs are provided for handling.