Brand:

MTL 5043 – Analog Output Isolator Module (4–20 mA)

Description

Overview

The MTL 5043 is a high-reliability signal conditioning module from the MTL 5000 Series that provides isolated 4-20 mA analog outputs for critical industrial automation and process control systems. It ensures safe, accurate signal transfer from the control system to field devices, even in hazardous or electrically noisy environments, and is widely used where intrinsic safety and galvanic isolation are required.

Seven Star LLC supplies the MTL 5043 and the wider MTL 5000 Series signal conditioning range to process industries across Oman and the GCC, with technical guidance on module selection for specific isolation and hazardous-area requirements.

Operating Principle

The 5043 accepts a control signal input and converts it into an isolated 4-20 mA analog output, using 3-port isolation to keep the input, output, and power circuits fully separated from one another. This isolation breaks ground loops and blocks noise from propagating between the control system and the field device, which is essential when signal accuracy directly affects process control decisions.

Operating from a nominal 24 V DC supply (20-35 V DC range), the module is designed for continuous duty on DIN rail-mounted panels, giving a compact, modular way to isolate individual analog output channels without adding bulky external isolation transformers or barriers.

Engineering Design of the MTL 5043

As part of the MTL 5000 Series, the 5043 shares the same compact DIN rail form factor and mounting system as the rest of the family, allowing panel builders to mix isolator, barrier, and conditioning modules from the same series in a single rack without special adapters. Depending on batch and version, the module carries ATEX, IECEx, FM, and CSA approvals, supporting installations that require certified intrinsic safety barriers between the control room and hazardous-area field instrumentation.

The module’s reliability record within the MTL 5000 Series makes it a common choice for safety-related loops where a signal conditioning failure could affect process safety, not just measurement accuracy — a distinction that matters when specifying isolators for safety instrumented systems versus general-purpose analog signal runs.

Key Features

  • Isolated 4-20 mA analog output signal conditioning
  • 3-port isolation between input, output, and power
  • Nominal 24 V DC supply (20-35 V DC range)
  • Compact DIN rail mounting for panel space savings
  • ATEX, IECEx, FM, and CSA approvals (per batch/version)
  • Reduces noise and ground loops between control and field
  • Part of the proven MTL 5000 signal conditioning series
  • Suitable for safety-related and hazardous-area applications

Industrial Applications

The MTL 5043 is used across oil and gas process automation, chemical and petrochemical plants, power generation facilities, and water treatment and utility systems wherever a control system needs an isolated 4-20 mA output to a field device. It is a common component in panels that mix intrinsically safe and general-purpose signal paths, keeping hazardous-area circuits properly isolated from the rest of the control system.

Across Oman, Muscat, Sohar, Salalah, and the GCC, Seven Star LLC supports process industry operators as an authorized supplier of genuine MTL signal conditioning modules, helping plants maintain certified, reliable isolation on their critical analog signal loops.

Technical Specifications

ModelMTL 5043
SeriesMTL 5000 Series
FunctionAnalog output isolator / signal conditioner
OutputIsolated 4-20 mA analog
Isolation3-port (input / output / power)
Supply Voltage20-35 V DC (nominal 24 V DC)
MountingDIN rail
ApprovalsATEX, IECEx, FM, CSA (batch/version dependent)

Request a Quote for MTL 5043 – Analog Output Isolator Module (4–20 mA)

Contact Seven Star LLC for pricing, availability, and technical support on the MTL 5043 Analog Output Isolator and the full range of MTL 5000 Series signal conditioning modules across Oman and the GCC.

Related Products

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “MTL 5043 – Analog Output Isolator Module (4–20 mA)”

Your email address will not be published.Required fields are marked *

About brand
MTL (an Eaton brand) focuses on intrinsic safety, signal conditioning, and surge protection for control systems. The range includes IS barriers/isolators, HART multiplexers, power supplies, and surge devices that safeguard plant integrity in hazardous process environments.
Request for quotation (RFQ)
MTL 5043 Analog Output Isolator Module 4–20 mA, MTL 5000 Series
MTL 5043 Analog Output Isolator Module 4–20 mA, MTL 5000 Series
MTL 5043 Analog Output Isolator Module 4–20 mA, MTL 5000 Series
MTL 5043 Analog Output Isolator Module 4–20 mA, MTL 5000 Series
MTL 5043 Analog Output Isolator Module 4–20 mA, MTL 5000 Series
Click to enlarge
MTL 5043 Analog Output Isolator Module 4–20 mA, MTL 5000 Series
MTL 5043 Analog Output Isolator Module 4–20 mA, MTL 5000 Series
MTL 5043 Analog Output Isolator Module 4–20 mA, MTL 5000 Series
MTL 5043 Analog Output Isolator Module 4–20 mA, MTL 5000 Series
MTL 5043 Analog Output Isolator Module 4–20 mA, MTL 5000 Series
Request for quotation (RFQ)

Frequently Asked Questions

What isolation does the MTL 5043 provide?
It provides 3-port isolation between the input, output, and power circuits, breaking ground loops and blocking noise between control and field.
Is the MTL 5043 suitable for hazardous areas?
Yes, depending on batch and version it carries ATEX, IECEx, FM, and CSA approvals for use in certified hazardous-area installations.
What output signal does the module generate?
It converts a control signal input into an isolated 4-20 mA analog output for field devices.
How is the MTL 5043 mounted?
It is a compact DIN rail-mounted module, allowing it to be installed alongside other MTL 5000 Series modules in the same panel.
Is Seven Star LLC an authorized representative for MTL products?
Yes, Seven Star LLC supplies genuine MTL 5000 Series signal conditioning modules across Oman and the GCC, with technical support for module selection.