Brand:

Festo SMT-8M-A-PSO-24V-E-0,3-M8D Proximity Sensor

Description

SMT-8M-A-PSO-24V-E-0,3-M8D: magneto-resistive proximity sensor for T-slot cylinders

The Festo SMT-8M-A-PSO-24V-E-0,3-M8D (article 574344) is a magneto-resistive proximity sensor for T-slot mounting. It detects the magnet on a piston and signals the end positions of a cylinder electronically. Seven Star LLC supplies SMT-8M-A-PSO-24V-E-0,3-M8D in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer. This page restates the datasheet in selection terms.

Reading the part number against the datasheet:

  • SMT-8M is the sensor type on the datasheet: a proximity sensor for T-slots with magneto-resistive measuring principle.
  • PSO: switching output , N/C or N/O contact, switchable.
  • 24V: rated operational voltage 24 V DC.
  • Connection: M8x1 plug on a 0.3 m cable, as listed under electrical connection and cable length (0.3 m).
  • IP rating on the sheet: IP65; IP68; IP69K.

SMT-8M-A-PSO-24V-E-0,3-M8D technical specifications

Values below are taken from the manufacturer data sheet for article 574344.

Parameter Specification
Manufacturer / part number Festo / SMT-8M-A-PSO-24V-E-0,3-M8D
Article number 574344
Design for T-slot
Based on the standard EN 60947-5-2
Authorisation RCM Mark; c UL us – Listed (OL)
CE mark (see declaration of conformity) to EU directive for EMC; in accordance with EU RoHS directive
UKCA marking (see declaration of conformity) To UK instructions for EMC; To UK RoHS instructions
KC mark KC-EMV
Special characteristics Oil resistant
Materials note Conforms to RoHS; Halogen-free
Instructions for use Support / Actuator-sensor overview “The right sensor for the actuator”
Measured variable Position
Measuring principle Magnetoresistive
Ambient temperature -40 to 85 °C
Repetition accuracy 0.2 mm
Switch output PNP
Switching element function N/C or N/O contact, switchable
Switch-on time ≤ 1 ms
Switch-off time ≤ 1 ms
Max. switching frequency 180 Hz
Max. output current 100 mA
Max. output current in mounting kits 100 mA
Max. contact rating DC 2.7 W
Max. switching capacity DC in mounting kits 2.7 W
Voltage drop < 2.5 V
Short circuit strength Yes
Overload withstand capability Available
Nominal operating voltage DC 24 V
Operating voltage range DC 7 to 30 V
Polarity protected for all electrical connections
Electrical connection 1, connection type Cable with plug
Electrical connection 1, connection technology M8x1, A-coded to EN 61076-2-104
Electrical connection 1, number of pins/wires 3
Electrical connection 1, type of mounting Screw lock
Connector exit direction axial
Test conditions of cable Bending strength according to Festo standard; Test conditions on request; Chain link trunking: 5 million cycles, bending radius 28 mm; Torsion resistance: > 300,000 cycles, ±270°/0.1 m
Cable length 0.3 m
Cable attribute Energy chain + robot
Cable sheath colour Grey
Material cable sheath TPE-U(PUR)
Mounting type Tightened; Insertable in slot from above
Max. tightening torque 0.6 Nm
Assembly position Any
Product weight 9g
Housing colour Black
Material housing Nickel-plated brass; PA-reinforced; High alloy steel, non-corrosive
Operating status display Yellow LED (for normally open contact) / White LED (for normally; closed contact)
Ambient temperature with flexible cable installation -20 to 85 °C

How the SMT-8M-A-PSO-24V-E-0,3-M8D detects the piston position

A cylinder with a magnetic piston carries a permanent magnet. As the piston reaches the sensor, the magnet field changes the resistance of a thin magneto-resistive element, and the electronics convert the change into a clean switching signal. There is no contact and no moving part in the sensor, so the wear is negligible.

The output is and N/C or N/O contact, switchable, with a switch-on time of ≤ 1 ms and a switch-off time of ≤ 1 ms. The maximum switching frequency is 180 Hz, which is far above any normal cylinder cycle. Output current is 100 mA, with a voltage drop of < 2.5 V on the sheet, and short-circuit and overload protection are listed.

The operating voltage range is 7 to 30 V, rated at 24 V DC. The LED shows the selected contact state: yellow for normally open and white for normally closed, as listed on the sheet.

Where SMT-8M-A-PSO-24V-E-0,3-M8D fits: compatible and related parts

The sensor slides into the T-slot of a suitable cylinder profile from above and is held by a screw, so it can be retrofitted without removing the cylinder. It works with cylinders that have a magnetic piston and a matching T-slot; the exact compatibility must be checked against the cylinder datasheet.

Other versions of this sensor that we handle include SMT-8M-A-PS-24V-E-0,3-M12, SMT-8M-A-PS-24V-E-0,3-M8D, SMT-8M-A-NS-24V-E-0,3-M8D, SMT-8M-A-NS-24V-E-2,5-OE, SMT-8M-A-PS-24V-E-5,0-OE. They differ in PNP or NPN output, connector, cable length and contact function.

Selection and ordering checklist for SMT-8M-A-PSO-24V-E-0,3-M8D

  • Output type: ; this must match the PLC input type.
  • Connection: M8x1 plug on a 0.3 m cable.
  • Supply: 7 to 30 V, nominal 24 V DC.
  • Ambient temperature range on the sheet: -40 to 85 °C, and IP rating IP65; IP68; IP69K.
  • Contact function: N/C or N/O contact, switchable.
  • The datasheet is of an older layout with its own limits: for example a wider 7 to 30 V operating range and 180 Hz switching frequency. Confirm the contact function you need is the one set when it arrives.

Installation, commissioning and maintenance of SMT-8M-A-PSO-24V-E-0,3-M8D

Insert the sensor from above into the T-slot, move it to the position where the LED switches as the piston arrives, and tighten the screw. The datasheet lists a maximum tightening torque of 0.6 Nm; do not exceed it because the housing is small.

Route the cable clear of moving parts and, for the plug versions, tighten the connector by hand. Check the LED during commissioning; if the orange function reserve LED is lit, reposition the sensor. Keep a spare sensor per type, because replacement is quick and a failed end-position sensor stops a machine.

Typical applications of SMT-8M-A-PSO-24V-E-0,3-M8D in Oman and the GCC

Oman and the wider GCC put pneumatic and sensing equipment under demanding conditions: summer ambient heat, fine desert dust, high humidity in coastal plants and compressed-air systems that are not always perfectly dried. This version has a switchable contact function, normally open or normally closed, selected in the sensor, and a two-colour LED that shows which state is set. It lets one spare cover both logic needs on a plant with mixed cylinder wiring.

The datasheet lists protection ratings IP65; IP68; IP69K, and an ambient range of -40 to 85 °C, so the sensor tolerates washdown and heat in typical plant conditions. Fine dust and sand do not affect a magnetic sensor, but cables should be protected from sunlight and abrasion.

SMT-8M-A-PSO-24V-E-0,3-M8D compared with other SMT-8M sensors

Output, cable, connector and weight from the manufacturer sheets of the sensors listed in this range.

Part number Output Cable Connector Weight
SMT-8M-A-PSO-24V-E-0,3-M8D PNP 0.3 m None (open end) 9g
SMT-8M-A-PS-24V-E-0,3-M12 PNP 0.3 m M12x1, A-coded to EN 61076-2-101 15.9 g
SMT-8M-A-PS-24V-E-0,3-M8D PNP 0.3 m M8x1, A-coded, to EN 61076-2-104 8.9 g
SMT-8M-A-NS-24V-E-0,3-M8D NPN 0.3 m M8x1, A-coded, to EN 61076-2-104 8.9 g
SMT-8M-A-NS-24V-E-2,5-OE NPN 2.5 m Open end 29.1 g
SMT-8M-A-PS-24V-E-5,0-OE PNP 5m Open end 57.1 g

Information to send with your SMT-8M-A-PSO-24V-E-0,3-M8D RFQ

  • Full part number SMT-8M-A-PSO-24V-E-0,3-M8D and quantity.
  • PLC input type: PNP or NPN.
  • Connector type or open-end wiring and the cable length needed.
  • Cylinder model on which the sensor will be fitted.
  • Supply voltage and environment.
  • Delivery location in Oman or the GCC.

Documents and quotation

The manufacturer data sheet for SMT-8M-A-PSO-24V-E-0,3-M8D is attached on this page for download.

Send the part number SMT-8M-A-PSO-24V-E-0,3-M8D with quantity and delivery location and we will confirm availability and a quotation. Seven Star LLC is an independent supplier and is not affiliated with the manufacturer.

Other Models in the Festo Smt 8m Proximity Sensor Range

Seven Star LLC supplies models from the Festo Smt 8m Proximity Sensor range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Festo SMT-8M-A-PS-24V-E-0,3-M12 Proximity SensorMagnetic, Cylinder & Capacitive SensorsView details
Festo SMT-8M-A-PS-24V-E-0,3-M8D Proximity SensorMagnetic, Cylinder & Capacitive SensorsView details
Festo SMT-8M-A-NS-24V-E-0,3-M8D Proximity SensorMagnetic, Cylinder & Capacitive SensorsView details
Festo SMT-8M-A-NS-24V-E-2,5-OE Proximity SensorMagnetic, Cylinder & Capacitive SensorsView details
Festo SMT-8M-A-PS-24V-E-5,0-OE Proximity SensorMagnetic, Cylinder & Capacitive SensorsView details
Festo SMT-8M-A-PSO-24V-E-0,3-M8D Proximity SensorMagnetic, Cylinder & Capacitive SensorsYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Festo SMT-8M-A-PSO-24V-E-0,3-M8D Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Festo is a German maker of pneumatic and electric automation technology, founded in 1925 in Esslingen am Neckar by Albert Fezer and Gottlieb Stoll; the name comes from their surnames. It first made woodworking machines and power tools before moving into pneumatics in the 1950s. Festo is family-owned and still headquartered in Esslingen.

Seven Star LLC sources and supplies Festo cylinders, valves and valve terminals for machine maintenance and projects in Oman and the GCC.

Festo company profile

Founded 1925, Esslingen am Neckar, Germany
Founders Albert Fezer and Gottlieb Stoll
Name From FEzer and STOll
Headquarters Esslingen am Neckar
Ownership Family-owned
Product families DSBC and ADN pneumatic cylinders, VUVG and VTUG solenoid valves and valve terminals, MS series air preparation units, CPX-AP remote I/O, EMMT servo motors and CMMT servo drives, electric axes and grippers

Milestones

  • 1925: Fezer and Stoll found the company in Esslingen.
  • 1950s: Festo begins making pneumatic components.

Festo products listed

Two items show the two halves of a pneumatic circuit. The VTUG is a valve terminal: a manifold that carries a row of directional valves with common air supply and a shared electrical connection. The DSBC-32-100-PPVA-N3 is an ISO standard cylinder. Its type code reads as 32 mm piston diameter and 100 mm stroke, with adjustable end-position cushioning and a piston magnet for position sensing.

Festo products we list

Family Examples
Automation Accessories KMP3-9P-08-5 Connecting Cable, KMPYE-AIF-1-GS-GD-2 Cable
Pneumatic Cylinders ADN-100-30-A-P-A Compact Cylinder
Valve Actuators DSBC-32-100-PPVA-N3 ISO Cylinder
Pressure Instrumentation VPEV-1/8 Pressure Switch
Solenoid Valves VTUG Valve Terminal

Ordering Festo parts: what we need

Festo parts carry both a type code and a numeric part number on the label. Send both when you can; the part number is the shortest route to an exact match. For a cylinder give the full type code as on the listed DSBC example, plus mounting parts and proximity switches if required. For a VTUG valve terminal send the configuration code or a label photo: number of valve positions, valve functions, coil voltage and the electrical connection type all vary from one terminal to the next.

Facts checked against Festo's corporate history pages, October 2026.

FAQ

Questions about the Festo SMT-8M-A-PSO-24V-E-0,3-M8D Proximity Sensor

Answers from our engineering team on installation, compatibility and integration.

01What output does the SMT-8M-A-PSO-24V-E-0,3-M8D have?
The datasheet lists a output with a N/C or N/O contact, switchable. Match it to a PLC input of the same logic type.
02What connection does the SMT-8M-A-PSO-24V-E-0,3-M8D use?
It has M8x1 plug on a 0.3 m cable according to the data sheet, with a cable length of 0.3 m.
03How fast does the SMT-8M-A-PSO-24V-E-0,3-M8D switch?
The datasheet gives a switch-on time of ≤ 1 ms, a switch-off time of ≤ 1 ms and a maximum switching frequency of 180 Hz.
04What protection rating does the SMT-8M-A-PSO-24V-E-0,3-M8D have?
The datasheet lists IP65; IP68; IP69K and an ambient temperature of -40 to 85 °C, so it is suited to demanding machine environments.
05How is the SMT-8M-A-PSO-24V-E-0,3-M8D mounted?
It is inserted from above into the T-slot of a suitable cylinder and clamped with a screw, with a maximum tightening torque of 0.6 Nm.