- Automation & ControlView all 2,479 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- CCTV & Security
- Motor Soft Starters
- Encoders
- Safety Switches & Guard Locking
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Festo
Festo SMT-8M-A-PS-24V-E-5,0-OE Proximity Sensor
Description
SMT-8M-A-PS-24V-E-5,0-OE: magneto-resistive proximity sensor for T-slot cylinders
The Festo SMT-8M-A-PS-24V-E-5,0-OE (article 574336) is a magneto-resistive proximity sensor for T-slot mounting. It detects the magnet on a piston and signals the end positions of a cylinder electronically. Seven Star LLC supplies SMT-8M-A-PS-24V-E-5,0-OE in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer. This page restates the datasheet in selection terms.
Reading the part number against the datasheet:
- SMT-8M is the sensor type on the datasheet: a proximity sensor for T-slots with magneto-resistive measuring principle.
- PS: switching output PNP, N/O contact.
- 24V: rated operational voltage 24 V DC.
- Connection: 5 m cable with open end and wire ferrules, as listed under electrical connection and cable length (5m).
- IP rating on the sheet: IP65; IP68; IP69K.
SMT-8M-A-PS-24V-E-5,0-OE technical specifications
Values below are taken from the manufacturer data sheet for article 574336.
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Festo / SMT-8M-A-PS-24V-E-5,0-OE |
| Article number | 574336 |
| Design | For T-slot |
| Based on standard | EN 60947-5-2 |
| Approval | RCM; c UL us – Listed (Oil) |
| CE mark (see declaration of conformity) | To EU EMC Directive; In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC; To UK RoHS instructions |
| Special characteristics | Oil-resistant |
| Measured variable | Position |
| Measuring principle | Magneto-resistive |
| Ambient temperature | -40 °C to 85 °C |
| Repetition accuracy | 0.2 mm |
| Switching output | PNP |
| Switching element function | N/O contact |
| Switch-on time | 1.3 ms |
| Switch-off time | 7.3 ms |
| Max. switching frequency | 130 Hz |
| Max. output current | 100 mA |
| Max. output current using mounting kits | 100 mA |
| Max. switching capacity DC | 2.8 W |
| Max. switching capacity DC using mounting kits | 2.8 W |
| Voltage drop | 1.5 V |
| Short circuit current rating | Yes |
| Overload protection | Yes |
| Rated operational voltage DC | 24 V |
| Operational voltage range DC | 5 V to 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Cable |
| Electrical connection 1, connector system | Open end |
| Electrical connection 1, number of connections/cores | 3 |
| Connection outlet orientation | In-line |
| Cable length | 5m |
| Cable characteristic | Suitable for energy chains/robot applications |
| Cable sheath colour | Grey |
| Material cable sheath | TPE-U(PUR) |
| Material insulating sheath | PP |
| Wire ends | Wire ferrule |
| Type of mounting | Screw-clamped; Insertable in the slot from above |
| Max. tightening torque | 0.6 Nm |
| Mounting position | Any |
| Product weight | 57.1 g |
| Housing colour | Black |
| Material housing | Reinforced PA; High-alloy stainless steel |
| Switching status indication | Yellow LED |
| Function reserve indication | Orange LED |
| Ambient temperature with moving cable | -20 °C to 85 °C |
| Degree of protection | IP65; IP68; IP69K |
| LABS (PWIS) conformity | VDMA24364-B2-L |
How the SMT-8M-A-PS-24V-E-5,0-OE detects the piston position
A cylinder with a magnetic piston carries a permanent magnet. As the piston reaches the sensor, the magnet field changes the resistance of a thin magneto-resistive element, and the electronics convert the change into a clean switching signal. There is no contact and no moving part in the sensor, so the wear is negligible.
The output is PNP and N/O contact, with a switch-on time of 1.3 ms and a switch-off time of 7.3 ms. The maximum switching frequency is 130 Hz, which is far above any normal cylinder cycle. Output current is 100 mA, with a voltage drop of 1.5 V on the sheet, and short-circuit and overload protection are listed.
The operating voltage range is 5 V to 30 V, rated at 24 V DC. A yellow LED shows the switching state and an orange LED is listed as the function reserve indicator, which warns before the magnet signal becomes marginal.
Where SMT-8M-A-PS-24V-E-5,0-OE fits: compatible and related parts
The sensor slides into the T-slot of a suitable cylinder profile from above and is held by a screw, so it can be retrofitted without removing the cylinder. It works with cylinders that have a magnetic piston and a matching T-slot; the exact compatibility must be checked against the cylinder datasheet.
Other versions of this sensor that we handle include SMT-8M-A-PS-24V-E-0,3-M12, SMT-8M-A-PS-24V-E-0,3-M8D, SMT-8M-A-NS-24V-E-0,3-M8D, SMT-8M-A-NS-24V-E-2,5-OE, SMT-8M-A-PSO-24V-E-0,3-M8D. They differ in PNP or NPN output, connector, cable length and contact function.
Selection and ordering checklist for SMT-8M-A-PS-24V-E-5,0-OE
- Output type: PNP; this must match the PLC input type.
- Connection: 5 m cable with open end and wire ferrules.
- Supply: 5 V to 30 V, nominal 24 V DC.
- Ambient temperature range on the sheet: -40 °C to 85 °C, and IP rating IP65; IP68; IP69K.
- Contact function: N/O contact.
- Check that the 5 m cable length fits the routing, and that the PNP output matches the input card. The cable weighs more than the short-lead versions, so support it with clips.
Installation, commissioning and maintenance of SMT-8M-A-PS-24V-E-5,0-OE
Insert the sensor from above into the T-slot, move it to the position where the LED switches as the piston arrives, and tighten the screw. The datasheet lists a maximum tightening torque of 0.6 Nm; do not exceed it because the housing is small.
Route the cable clear of moving parts and, for the plug versions, tighten the connector by hand. Check the LED during commissioning; if the orange function reserve LED is lit, reposition the sensor. Keep a spare sensor per type, because replacement is quick and a failed end-position sensor stops a machine.
Typical applications of SMT-8M-A-PS-24V-E-5,0-OE in Oman and the GCC
Oman and the wider GCC put pneumatic and sensing equipment under demanding conditions: summer ambient heat, fine desert dust, high humidity in coastal plants and compressed-air systems that are not always perfectly dried. The 5 m open-end cable reaches from a cylinder on a machine frame to a remote terminal box without an extension, which suits long runs on conveyors, gates, stoppers and process-line actuators.
The datasheet lists protection ratings IP65; IP68; IP69K, and an ambient range of -40 °C to 85 °C, so the sensor tolerates washdown and heat in typical plant conditions. Fine dust and sand do not affect a magnetic sensor, but cables should be protected from sunlight and abrasion.
SMT-8M-A-PS-24V-E-5,0-OE compared with other SMT-8M sensors
Output, cable, connector and weight from the manufacturer sheets of the sensors listed in this range.
| Part number | Output | Cable | Connector | Weight |
|---|---|---|---|---|
| SMT-8M-A-PS-24V-E-5,0-OE | PNP | 5m | Open end | 57.1 g |
| SMT-8M-A-PS-24V-E-0,3-M12 | PNP | 0.3 m | M12x1, A-coded to EN 61076-2-101 | 15.9 g |
| SMT-8M-A-PS-24V-E-0,3-M8D | PNP | 0.3 m | M8x1, A-coded, to EN 61076-2-104 | 8.9 g |
| SMT-8M-A-NS-24V-E-0,3-M8D | NPN | 0.3 m | M8x1, A-coded, to EN 61076-2-104 | 8.9 g |
| SMT-8M-A-NS-24V-E-2,5-OE | NPN | 2.5 m | Open end | 29.1 g |
| SMT-8M-A-PSO-24V-E-0,3-M8D | PNP | 0.3 m | None (open end) | 9g |
Information to send with your SMT-8M-A-PS-24V-E-5,0-OE RFQ
- Full part number SMT-8M-A-PS-24V-E-5,0-OE and quantity.
- PLC input type: PNP or NPN.
- Connector type or open-end wiring and the cable length needed.
- Cylinder model on which the sensor will be fitted.
- Supply voltage and environment.
- Delivery location in Oman or the GCC.
Documents and quotation
The manufacturer data sheet for SMT-8M-A-PS-24V-E-5,0-OE is attached on this page for download.
Send the part number SMT-8M-A-PS-24V-E-5,0-OE with quantity and delivery location and we will confirm availability and a quotation. Seven Star LLC is an independent supplier and is not affiliated with the manufacturer.
Other Models in the Festo Smt 8m Proximity Sensor Range
Seven Star LLC supplies models from the Festo Smt 8m Proximity Sensor range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Festo SMT-8M-A-PS-24V-E-0,3-M12 Proximity Sensor | Magnetic, Cylinder & Capacitive Sensors | View details |
| Festo SMT-8M-A-PS-24V-E-0,3-M8D Proximity Sensor | Magnetic, Cylinder & Capacitive Sensors | View details |
| Festo SMT-8M-A-NS-24V-E-0,3-M8D Proximity Sensor | Magnetic, Cylinder & Capacitive Sensors | View details |
| Festo SMT-8M-A-NS-24V-E-2,5-OE Proximity Sensor | Magnetic, Cylinder & Capacitive Sensors | View details |
| Festo SMT-8M-A-PS-24V-E-5,0-OE Proximity Sensor | Magnetic, Cylinder & Capacitive Sensors | You are viewing this model |
Datasheets & Documents
- Datasheet Festo SMT-8M-A-PS-24V-E-5,0-OE Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Festo is a German maker of pneumatic and electric automation technology, founded in 1925 in Esslingen am Neckar by Albert Fezer and Gottlieb Stoll; the name comes from their surnames. It first made woodworking machines and power tools before moving into pneumatics in the 1950s. Festo is family-owned and still headquartered in Esslingen.
Seven Star LLC sources and supplies Festo cylinders, valves and valve terminals for machine maintenance and projects in Oman and the GCC.
Festo company profile
| Founded | 1925, Esslingen am Neckar, Germany |
|---|---|
| Founders | Albert Fezer and Gottlieb Stoll |
| Name | From FEzer and STOll |
| Headquarters | Esslingen am Neckar |
| Ownership | Family-owned |
| Product families | DSBC and ADN pneumatic cylinders, VUVG and VTUG solenoid valves and valve terminals, MS series air preparation units, CPX-AP remote I/O, EMMT servo motors and CMMT servo drives, electric axes and grippers |
Milestones
- 1925: Fezer and Stoll found the company in Esslingen.
- 1950s: Festo begins making pneumatic components.
Festo products listed
Two items show the two halves of a pneumatic circuit. The VTUG is a valve terminal: a manifold that carries a row of directional valves with common air supply and a shared electrical connection. The DSBC-32-100-PPVA-N3 is an ISO standard cylinder. Its type code reads as 32 mm piston diameter and 100 mm stroke, with adjustable end-position cushioning and a piston magnet for position sensing.
Festo products we list
Ordering Festo parts: what we need
Festo parts carry both a type code and a numeric part number on the label. Send both when you can; the part number is the shortest route to an exact match. For a cylinder give the full type code as on the listed DSBC example, plus mounting parts and proximity switches if required. For a VTUG valve terminal send the configuration code or a label photo: number of valve positions, valve functions, coil voltage and the electrical connection type all vary from one terminal to the next.
Facts checked against Festo's corporate history pages, October 2026.
Browse Festo products by category: Solenoid Valve, Valve Actuator.
FAQ
Questions about the Festo SMT-8M-A-PS-24V-E-5,0-OE Proximity Sensor
Answers from our engineering team on installation, compatibility and integration.
01What output does the SMT-8M-A-PS-24V-E-5,0-OE have?
The datasheet lists a PNP output with a N/O contact. Match it to a PLC input of the same logic type.
02What connection does the SMT-8M-A-PS-24V-E-5,0-OE use?
It has 5 m cable with open end and wire ferrules according to the data sheet, with a cable length of 5m.
03How fast does the SMT-8M-A-PS-24V-E-5,0-OE switch?
The datasheet gives a switch-on time of 1.3 ms, a switch-off time of 7.3 ms and a maximum switching frequency of 130 Hz.
04What protection rating does the SMT-8M-A-PS-24V-E-5,0-OE have?
The datasheet lists IP65; IP68; IP69K and an ambient temperature of -40 °C to 85 °C, so it is suited to demanding machine environments.
05How is the SMT-8M-A-PS-24V-E-5,0-OE mounted?
It is inserted from above into the T-slot of a suitable cylinder and clamped with a screw, with a maximum tightening torque of 0.6 Nm.


















Reviews
There are no reviews yet.