Brand:

Festo SDE5-D10-O-Q6-P-M8 Pressure Sensor

Description

SDE5-D10-O-Q6-P-M8: Festo SDE5 0 to 10 bar pressure sensor with PNP switching output

The Festo Festo SDE5-D10-O-Q6-P-M8 (Festo part number 527464) is a compact SDE5 pressure sensor with PNP switching output for compressed air and similar neutral gases. It measures relative pressure from 0 to 10 bar, provides a PNP switching output with fixed hysteresis, connects to the process through a QS-6 push-in port and to the controller through an M8x1, A-coded, to EN 61076-2-104 plug. Seven Star LLC supplies the Festo SDE5-D10-O-Q6-P-M8 in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.

Decoding the SDE5-D10-O-Q6-P-M8 type code

The elements below follow the datasheet values, so you can cross-check them against the nameplate:

  • SDE5: Festo compact pressure sensor family
  • D10: pressure range code, 0 to 10 bar according to the datasheet
  • O: output style code; this version has a PNP switching output
  • Q6: pneumatic connection QS-6
  • P: output polarity or signal type code
  • M8: electrical connection, M8x1, A-coded, to EN 61076-2-104

Festo SDE5-D10-O-Q6-P-M8 technical specifications

Parameter Specification
Manufacturer / part number Festo SDE5-D10-O-Q6-P-M8 (Festo part number 527464)
Product type Pressure sensor
Approval RCM; c UL us – Recognised (Oil)
CE mark (see declaration of conformity) To EU EMC Directive; In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity) To UK instructions for EMC; To UK RoHS instructions
Note on materials RoHS compliant
Measured variable Relative pressure
Measurement method Piezoresistive pressure sensor
Start value for pressure measuring range 0 MPa; 0 bar; 0 psi
End value for pressure measuring range 1 MPa; 10 bar; 145 psi
Overload pressure 1.5 MPa; 15 bar; 217.5 psi
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible
Media temperature 0 °C to 50 °C
Ambient temperature 0 °C to 50 °C
Accuracy in ± % FS 0.5 %FS
Repetition accuracy in ± %FS 0.3 %FS
Temperature coefficient in ± %FS/K 0.05 %FS/K
Switching output PNP
Switching function Threshold value with xed hysteresis
Switching element function N/O contact
Hysteresis in ± %FS 2 %FS
Switch-on time 2 ms
Switch-off time 2 ms
Max. output current 100 mA
Voltage drop 1.8 V
Short circuit current rating Yes
Overload protection Yes
Operational voltage range DC 15 V to 30 V
Reverse polarity protection For all electrical connections
Electrical connection 1, connection type Plug
Electrical connection 1, connector system M8x1, A-coded, to EN 61076-2-104
Electrical connection 1, number of connections/cores 3
Electrical connection 1, type of mounting Snap-locking; Screw-type lock; Not rotatable
Electrical connection 1, compatible type of mounting Compatible with latching lock; Compatible with rotatable screw-type lock
Material connector housing Brass, nickel-plated
Max. cable length 30 M
Type of mounting With accessories
Mounting position Any
Pneumatic connection QS-6
Product weight 19 g
Material housing Reinforced PA; Reinforced POM
Material sealing ring Fluoro rubber; NBR
Switching status indication Yellow LED
Setting options Teach-in
Setting range threshold value 0 % to 100 %
Degree of protection IP40
Corrosion resistance class CRC 2 – Moderate corrosion stress
LABS (PWIS) conformity VDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14 Class 4 according to ISO 14644-1

Measuring principle of the SDE5-D10-O-Q6-P-M8

The sensor uses a piezoresistive element in a plastic housing: pressure acting on the sensing element changes its electrical resistance, which the electronics convert into the output signal. Accuracy is 0.5 %FS, repeatability is 0.3 %FS, and the supply range is 15 V to 30 V. The switching output is PNP and changes state when the pressure crosses the set threshold; the switching element function is N/O contact and the yellow LED shows the switching state on the sensor housing. Response times are 2 ms on and 2 ms off. The overload pressure is 15 bar.

Electrical connection, mounting and sizing data for the SDE5-D10-O-Q6-P-M8

Electrical connection is via an M8x1, A-coded, to EN 61076-2-104 plug with 3 cores and a nickel-plated brass connector. Reverse polarity, short circuit and overload protection are stated in the datasheet. The housing material is Reinforced PA; Reinforced POM, the product weighs 19 g, and the permitted ambient temperature is 0 °C to 50 °C. Mounting is with accessories, in any position, so a bracket or a push-in connection directly on the tube is typical.

Where the SDE5-D10-O-Q6-P-M8 fits: related SDE5 sensors

The SDE5 range combines pressure range, port size and output type. Related versions include Festo SDE5-D10-O-Q6-P-M8, SDE5-D10-O-Q4E-P-M8, SDE5-D10-NF-Q6-V-M8, SDE5-D10-O-Q6-N-M8 and SDE5-V1-O-Q6-P-M8. They share the same body and M8 connection concept, so replacing one with another normally affects only range, tube size or signal type, which must be checked against the control input.

Part number Range end value Output Port Voltage
SDE5-D10-O-Q6-P-M8 10 bar PNP QS-6 15 V to 30 V
SDE5-D10-O-Q4E-P-M8 10 bar PNP QS-4 15 V to 30 V
SDE5-D10-NF-Q6-V-M8 10 bar Analogue 0 – 10 V QS-6 15 V to 30 V
SDE5-D10-O-Q6-N-M8 10 bar NPN QS-6 15 V to 30 V
SDE5-V1-O-Q6-P-M8 -1 bar PNP QS-6 15 V to 30 V

Selection and ordering checklist for SDE5-D10-O-Q6-P-M8

Choose this version for 0 to 10 bar monitoring with a PNP switching output and the QS-6 push-in port.

  • Range: 0 to 10 bar; make sure the working pressure sits inside it and below the overload value.
  • Output: PNP switching; match to the PLC input type.
  • Port: QS-6; confirm tube size and fittings.
  • Supply: 15 V…30 V.
  • Connector: M8, 3-pin A-coded; select the cable with the right length and angle.
  • Environment: ambient range 0 °C to 50 °C.

Installation, commissioning and maintenance of the SDE5-D10-O-Q6-P-M8

Push the sensor onto the tube or fix it with the accessory bracket, then connect the M8 cable and supply 15 V to 30 V DC. For the switching version, set the threshold and hysteresis as described in the datasheet and watch the yellow LED while cycling the pressure. Keep the compressed air clean and dry; particles and condensate are the main cause of drift. Inspect the connector for loosening in vibrating machines and keep a spare sensor on critical lines.

Typical applications of the SDE5-D10-O-Q6-P-M8 in Oman and the GCC

A 0 to 10 bar switching pressure sensor with PNP output is a common choice for monitoring compressed-air supply pressure on machines, gripper vacuum or pressure, and clamping circuits. The yellow LED shows the switching state at the sensor itself. In Oman and the GCC the sensor often works in warm cabinets and outdoor skids, so check the ambient range and protect the cable and connector from sun and dust.

Information to send with an RFQ for SDE5-D10-O-Q6-P-M8

  • Full type code SDE5-D10-O-Q6-P-M8 and Festo part number 527464.
  • Quantity and timeframe.
  • Pressure range and output type needed by the controller.
  • Tube size and fittings.
  • Connector cables required.
  • Delivery destination in Oman or the GCC.

Documents and quotation

A datasheet for the SDE5-D10-O-Q6-P-M8 is attached on this page. It contains the data above; check application limits against it.

To request a quotation, send the part number SDE5-D10-O-Q6-P-M8, quantity and delivery location. Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer.

Other Models in the Festo Sde5 Range

Seven Star LLC supplies models from the Festo Sde5 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Festo SDE5-D10-O-Q6-P-M8 Pressure SensorAutomation AccessoriesYou are viewing this model
Festo SDE5-D10-O-Q4E-P-M8 Pressure SensorAutomation AccessoriesView details
Datasheets & Documents
  • PDF Datasheet Festo SDE5-D10-O-Q6-P-M8 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Festo is a German maker of pneumatic and electric automation technology, founded in 1925 in Esslingen am Neckar by Albert Fezer and Gottlieb Stoll; the name comes from their surnames. It first made woodworking machines and power tools before moving into pneumatics in the 1950s. Festo is family-owned and still headquartered in Esslingen.

Seven Star LLC sources and supplies Festo cylinders, valves and valve terminals for machine maintenance and projects in Oman and the GCC.

Festo company profile

Founded 1925, Esslingen am Neckar, Germany
Founders Albert Fezer and Gottlieb Stoll
Name From FEzer and STOll
Headquarters Esslingen am Neckar
Ownership Family-owned
Product families DSBC and ADN pneumatic cylinders, VUVG and VTUG solenoid valves and valve terminals, MS series air preparation units, CPX-AP remote I/O, EMMT servo motors and CMMT servo drives, electric axes and grippers

Milestones

  • 1925: Fezer and Stoll found the company in Esslingen.
  • 1950s: Festo begins making pneumatic components.

Festo products listed

Two items show the two halves of a pneumatic circuit. The VTUG is a valve terminal: a manifold that carries a row of directional valves with common air supply and a shared electrical connection. The DSBC-32-100-PPVA-N3 is an ISO standard cylinder. Its type code reads as 32 mm piston diameter and 100 mm stroke, with adjustable end-position cushioning and a piston magnet for position sensing.

Festo products we list

Family Examples
Automation Accessories KMP3-9P-08-5 Connecting Cable, KMPYE-AIF-1-GS-GD-2 Cable
Pneumatic Cylinders ADN-100-30-A-P-A Compact Cylinder
Valve Actuators DSBC-32-100-PPVA-N3 ISO Cylinder
Pressure Instrumentation VPEV-1/8 Pressure Switch
Solenoid Valves VTUG Valve Terminal

Ordering Festo parts: what we need

Festo parts carry both a type code and a numeric part number on the label. Send both when you can; the part number is the shortest route to an exact match. For a cylinder give the full type code as on the listed DSBC example, plus mounting parts and proximity switches if required. For a VTUG valve terminal send the configuration code or a label photo: number of valve positions, valve functions, coil voltage and the electrical connection type all vary from one terminal to the next.

Facts checked against Festo's corporate history pages, October 2026.

FAQ

Questions about the Festo SDE5-D10-O-Q6-P-M8 Pressure Sensor

Answers from our engineering team on installation, compatibility and integration.

01What pressure range does the SDE5-D10-O-Q6-P-M8 measure?
The datasheet gives a measuring range of 0 bar to 10 bar (relative pressure), with an overload pressure of 15 bar.
02What kind of output does the SDE5-D10-O-Q6-P-M8 have?
It has a PNP switching output with a fixed-hysteresis threshold function. Match this to the input type of your controller.
03What supply voltage and connector does the SDE5-D10-O-Q6-P-M8 use?
The supply range is 15 V...30 V and the connector is M8x1, A-coded, to EN 61076-2-104. Reverse polarity and short circuit protection are stated in the datasheet.
04How accurate is the SDE5-D10-O-Q6-P-M8?
The datasheet lists accuracy of 0.5 %FS and repetition accuracy of 0.3 %FS. Check the table on this page for the temperature coefficient.
05What pneumatic connection does the SDE5-D10-O-Q6-P-M8 have?
It has a QS-6 push-in port. Confirm the tube diameter in your circuit before ordering.