- Automation & ControlView all 2,718 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Servo Drives
- Pneumatic Cylinders
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Festo
Festo SDE5-D10-O-Q4E-P-M8 Pressure Sensor
Description
SDE5-D10-O-Q4E-P-M8: Festo SDE5 0 to 10 bar pressure sensor with PNP switching output
The Festo Festo SDE5-D10-O-Q4E-P-M8 (Festo part number 527466) is a compact SDE5 pressure sensor with PNP switching output for compressed air and similar neutral gases. It measures relative pressure from 0 to 10 bar, provides a PNP switching output with fixed hysteresis, connects to the process through a QS-4 push-in port and to the controller through an M8x1, A-coded, to EN 61076-2-104 plug. Seven Star LLC supplies the Festo SDE5-D10-O-Q4E-P-M8 in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.
Decoding the SDE5-D10-O-Q4E-P-M8 type code
The elements below follow the datasheet values, so you can cross-check them against the nameplate:
- SDE5: Festo compact pressure sensor family
- D10: pressure range code, 0 to 10 bar according to the datasheet
- O: output style code; this version has a PNP switching output
- Q4E: pneumatic connection QS-4
- P: output polarity or signal type code
- M8: electrical connection, M8x1, A-coded, to EN 61076-2-104
Festo SDE5-D10-O-Q4E-P-M8 technical specifications
| Parameter | Specification |
|---|---|
| Manufacturer / part number | Festo SDE5-D10-O-Q4E-P-M8 (Festo part number 527466) |
| Product type | Pressure sensor |
| Approval | RCM; c UL us – Recognised (Oil) |
| CE mark (see declaration of conformity) | To EU EMC Directive; In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC; To UK RoHS instructions |
| Note on materials | RoHS compliant |
| Measured variable | Relative pressure |
| Measurement method | Piezoresistive pressure sensor |
| Start value for pressure measuring range | 0 MPa; 0 bar; 0 psi |
| End value for pressure measuring range | 1 MPa; 10 bar; 145 psi |
| Overload pressure | 1.5 MPa; 15 bar; 217.5 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible |
| Media temperature | 0 °C to 50 °C |
| Ambient temperature | 0 °C to 50 °C |
| Accuracy in ± % FS | 0.5 %FS |
| Repetition accuracy in ± %FS | 0.3 %FS |
| Temperature coefficient in ± %FS/K | 0.05 %FS/K |
| Switching output | PNP |
| Switching function | Threshold value with xed hysteresis |
| Switching element function | N/O contact |
| Hysteresis in ± %FS | 2 %FS |
| Switch-on time | 2 ms |
| Switch-off time | 2 ms |
| Max. output current | 100 mA |
| Voltage drop | 1.8 V |
| Short circuit current rating | Yes |
| Overload protection | Yes |
| Operational voltage range DC | 15 V to 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 |
| Electrical connection 1, number of connections/cores | 3 |
| Electrical connection 1, type of mounting | Snap-locking; Screw-type lock; Not rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with latching lock; Compatible with rotatable screw-type lock |
| Material connector housing | Brass, nickel-plated |
| Max. cable length | 30 M |
| Type of mounting | With accessories |
| Mounting position | Any |
| Pneumatic connection | QS-4 |
| Product weight | 19 g |
| Material housing | Reinforced PA; Reinforced POM |
| Material sealing ring | Fluoro rubber; NBR |
| Switching status indication | Yellow LED |
| Setting options | Teach-in |
| Setting range threshold value | 0 % to 100 % |
| Degree of protection | IP40 |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 4 according to ISO 14644-1 |
Measuring principle of the SDE5-D10-O-Q4E-P-M8
The sensor uses a piezoresistive element in a plastic housing: pressure acting on the sensing element changes its electrical resistance, which the electronics convert into the output signal. Accuracy is 0.5 %FS, repeatability is 0.3 %FS, and the supply range is 15 V to 30 V. The switching output is PNP and changes state when the pressure crosses the set threshold; the switching element function is N/O contact and the yellow LED shows the switching state on the sensor housing. Response times are 2 ms on and 2 ms off. The overload pressure is 15 bar.
Electrical connection, mounting and sizing data for the SDE5-D10-O-Q4E-P-M8
Electrical connection is via an M8x1, A-coded, to EN 61076-2-104 plug with 3 cores and a nickel-plated brass connector. Reverse polarity, short circuit and overload protection are stated in the datasheet. The housing material is Reinforced PA; Reinforced POM, the product weighs 19 g, and the permitted ambient temperature is 0 °C to 50 °C. Mounting is with accessories, in any position, so a bracket or a push-in connection directly on the tube is typical.
Where the SDE5-D10-O-Q4E-P-M8 fits: related SDE5 sensors
The SDE5 range combines pressure range, port size and output type. Related versions include SDE5-D10-O-Q6-P-M8, Festo SDE5-D10-O-Q4E-P-M8, SDE5-D10-NF-Q6-V-M8, SDE5-D10-O-Q6-N-M8 and SDE5-V1-O-Q6-P-M8. They share the same body and M8 connection concept, so replacing one with another normally affects only range, tube size or signal type, which must be checked against the control input.
| Part number | Range end value | Output | Port | Voltage |
|---|---|---|---|---|
| SDE5-D10-O-Q6-P-M8 | 10 bar | PNP | QS-6 | 15 V to 30 V |
| SDE5-D10-O-Q4E-P-M8 | 10 bar | PNP | QS-4 | 15 V to 30 V |
| SDE5-D10-NF-Q6-V-M8 | 10 bar | Analogue 0 – 10 V | QS-6 | 15 V to 30 V |
| SDE5-D10-O-Q6-N-M8 | 10 bar | NPN | QS-6 | 15 V to 30 V |
| SDE5-V1-O-Q6-P-M8 | -1 bar | PNP | QS-6 | 15 V to 30 V |
Selection and ordering checklist for SDE5-D10-O-Q4E-P-M8
Choose the QS-4 port version when the circuit uses 4 mm tubing.
- Range: 0 to 10 bar; make sure the working pressure sits inside it and below the overload value.
- Output: PNP switching; match to the PLC input type.
- Port: QS-4; confirm tube size and fittings.
- Supply: 15 V…30 V.
- Connector: M8, 3-pin A-coded; select the cable with the right length and angle.
- Environment: ambient range 0 °C to 50 °C.
Installation, commissioning and maintenance of the SDE5-D10-O-Q4E-P-M8
Push the sensor onto the tube or fix it with the accessory bracket, then connect the M8 cable and supply 15 V to 30 V DC. For the switching version, set the threshold and hysteresis as described in the datasheet and watch the yellow LED while cycling the pressure. Keep the compressed air clean and dry; particles and condensate are the main cause of drift. Inspect the connector for loosening in vibrating machines and keep a spare sensor on critical lines.
Typical applications of the SDE5-D10-O-Q4E-P-M8 in Oman and the GCC
This model has the same 0 to 10 bar range but a QS-4 port for 4 mm tubing, typical for small compact pneumatic circuits like grippers or small cylinders where the tube size is limited. In Oman and the GCC the sensor often works in warm cabinets and outdoor skids, so check the ambient range and protect the cable and connector from sun and dust.
Information to send with an RFQ for SDE5-D10-O-Q4E-P-M8
- Full type code SDE5-D10-O-Q4E-P-M8 and Festo part number 527466.
- Quantity and timeframe.
- Pressure range and output type needed by the controller.
- Tube size and fittings.
- Connector cables required.
- Delivery destination in Oman or the GCC.
Documents and quotation
A datasheet for the SDE5-D10-O-Q4E-P-M8 is attached on this page. It contains the data above; check application limits against it.
To request a quotation, send the part number SDE5-D10-O-Q4E-P-M8, quantity and delivery location. Seven Star LLC is an independent supplier in Muscat and is not affiliated with the manufacturer.
Other Models in the Festo Sde5 Range
Seven Star LLC supplies models from the Festo Sde5 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Festo SDE5-D10-O-Q6-P-M8 Pressure Sensor | Automation Accessories | View details |
| Festo SDE5-D10-O-Q4E-P-M8 Pressure Sensor | Automation Accessories | You are viewing this model |
Datasheets & Documents
- Datasheet Festo SDE5-D10-O-Q4E-P-M8 Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Festo is a German maker of pneumatic and electric automation technology, founded in 1925 in Esslingen am Neckar by Albert Fezer and Gottlieb Stoll; the name comes from their surnames. It first made woodworking machines and power tools before moving into pneumatics in the 1950s. Festo is family-owned and still headquartered in Esslingen.
Seven Star LLC sources and supplies Festo cylinders, valves and valve terminals for machine maintenance and projects in Oman and the GCC.
Festo company profile
| Founded | 1925, Esslingen am Neckar, Germany |
|---|---|
| Founders | Albert Fezer and Gottlieb Stoll |
| Name | From FEzer and STOll |
| Headquarters | Esslingen am Neckar |
| Ownership | Family-owned |
| Product families | DSBC and ADN pneumatic cylinders, VUVG and VTUG solenoid valves and valve terminals, MS series air preparation units, CPX-AP remote I/O, EMMT servo motors and CMMT servo drives, electric axes and grippers |
Milestones
- 1925: Fezer and Stoll found the company in Esslingen.
- 1950s: Festo begins making pneumatic components.
Festo products listed
Two items show the two halves of a pneumatic circuit. The VTUG is a valve terminal: a manifold that carries a row of directional valves with common air supply and a shared electrical connection. The DSBC-32-100-PPVA-N3 is an ISO standard cylinder. Its type code reads as 32 mm piston diameter and 100 mm stroke, with adjustable end-position cushioning and a piston magnet for position sensing.
Festo products we list
Ordering Festo parts: what we need
Festo parts carry both a type code and a numeric part number on the label. Send both when you can; the part number is the shortest route to an exact match. For a cylinder give the full type code as on the listed DSBC example, plus mounting parts and proximity switches if required. For a VTUG valve terminal send the configuration code or a label photo: number of valve positions, valve functions, coil voltage and the electrical connection type all vary from one terminal to the next.
Facts checked against Festo's corporate history pages, October 2026.
Browse Festo products by category: Solenoid Valve, Valve Actuator.
FAQ
Questions about the Festo SDE5-D10-O-Q4E-P-M8 Pressure Sensor
Answers from our engineering team on installation, compatibility and integration.
01What pressure range does the SDE5-D10-O-Q4E-P-M8 measure?
The datasheet gives a measuring range of 0 bar to 10 bar (relative pressure), with an overload pressure of 15 bar.
02What kind of output does the SDE5-D10-O-Q4E-P-M8 have?
It has a PNP switching output with a fixed-hysteresis threshold function. Match this to the input type of your controller.
03What supply voltage and connector does the SDE5-D10-O-Q4E-P-M8 use?
The supply range is 15 V...30 V and the connector is M8x1, A-coded, to EN 61076-2-104. Reverse polarity and short circuit protection are stated in the datasheet.
04How accurate is the SDE5-D10-O-Q4E-P-M8?
The datasheet lists accuracy of 0.5 %FS and repetition accuracy of 0.3 %FS. Check the table on this page for the temperature coefficient.
05What pneumatic connection does the SDE5-D10-O-Q4E-P-M8 have?
It has a QS-4 push-in port. Confirm the tube diameter in your circuit before ordering.


















Reviews
There are no reviews yet.