- Automation & ControlView all 2,896 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Cortem
Cortem SAG111108 Ex eb Heavy-Wall Junction Box
Description
Cortem SAG111108 overview
Cortem SAG111108 is a compact heavy-wall Ex eb aluminium junction box with 7 mm walls. This is the smallest heavy-duty SAG body: 110 x 110 x 83 mm outside, 96 x 96 x 64 mm inside, with 7 mm walls and a weight of only 0.75 kg. Its marking reads II 2GD Ex eb IIC T6/T5/T4 Gb / Ex tb IIIC T75/T110°C Db, IP66, and the data sheet ties it to ATEX CESI 03 ATEX 333 and IECEx CES 13.0001.
Seven Star LLC works as an independent supplier for Oman and the GCC and is not affiliated with the manufacturer. The values quoted here are summarised from the published data sheet, so check the current edition at order time.
What stands out on this unit
- 7 mm thick walls that accept threaded holes directly
- IK10 impact rating and IP66 ingress protection
- Captive stainless steel cover screws
- Earth studs with anti-rotation brackets inside and outside
- Cast aluminium feet for M6 mounting screws
Technical data for Cortem SAG111108
| Part number | SAG111108 |
|---|---|
| Series | SA / SAG Ex eb aluminium junction boxes |
| Outside dimensions A x B x C | 110 x 110 x 83 mm |
| Inside dimensions a x b x c | 96 x 96 x 64 mm |
| Wall thickness S1 / S2 | 7 mm / 2.5 mm |
| Fixing X x Y | 94 x 94 mm |
| Fixing hole diameter | 6.5 mm |
| Weight | 0.75 kg |
| Marking | II 2GD Ex eb IIC T6/T5/T4 Gb, Ex tb IIIC T75/T110°C Db, IP66 |
| Certificates | CESI 03 ATEX 333; IECEx CES 13.0001; INMETRO DNV 15.0119; UL E550165 |
| Impact rating | IK10 |
| Rated voltage and current | 1000 Vac/dc; 312 A; 1.5 to 300 mm2 terminals |
| Drilling area, sides A and C | 58 x 55 mm: 3 x 3/8″, 2 x 1/2″, 1 x 3/4″, 1 x 1″ |
| Drilling area, sides B and D | 58 x 55 mm (square box, same as sides A and C) |
| Max terminals | 1.5 mm2: 16; 2.5 mm2: 11; 4 mm2: 9; 6 mm2: 7; 10 mm2: 5 |
| Body and lid | Low copper aluminium alloy; polyester RAL 7035 (Ex e) or RAL 5015 (Ex i) |
| Screws | Stainless steel, captive |
| Mounting | Cast aluminium feet for M6 screws |
How SAG111108 differs from other SA/SAG variants
A quick comparison for SAG111108 within the SA/SAG range follows; each point is taken from the selection chart of the data sheet.
- Wall thickness 7 mm against 3 mm for SA171108 and 4.5 mm for SA301410.
- Inside 96 x 96 x 64 mm, smaller than the 164 x 104 x 65 mm of SA171108.
- Weight 0.75 kg, compared with 0.80 kg for SA171108 and 27 kg for SAG606018.
- Terminal capacity 16 of 1.5 mm2 and 5 of 10 mm2, less than the 32 and 11 of SA171108.
Where SAG111108 is used
Where would you use SAG111108? Think of cable marshalling at pump skids, instrument cabling on process units, local control points beside motors, and branch junctions along cable trays at utilities, water and power sites across Oman and the GCC. Its thick walls allow threaded entries, so an instrument cable can enter through a tapered thread or a pipe fitting directly, a common requirement at transmitter and switch locations. The manufacturer lists refineries, petrochemical plants, onshore and offshore installations and loading wharfs as target sectors for this family.
Compatibility and selection
When choosing Cortem SAG111108, match the marking II 2GD Ex eb IIC T6/T5/T4 Gb / Ex tb IIIC T75/T110°C Db, IP66 to the hazardous area drawing, test the quoted ambient range (-40°C to +55°C as standard (T6 at +40°C, T5 at +55°C), with extended ranges down to -60°C and up to +85°C depending on terminals) against the hottest and coldest day on site, and check the internal volume against the wiring plan. Because the body is square, the sheet gives the same drilling area of 58 x 55 mm on every side, with up to 3 holes of 3/8 inch, 2 of 1/2 inch and 1 each of 3/4 inch and 1 inch. Anything fitted to the enclosure, from glands to terminals, needs its own matching certification.
Installation, commissioning and maintenance
Mounting SAG111108 is simple if the fixings are laid out first: use the listed centres, take the earth bond from the dedicated screw, and torque the cover bolts in a cross pattern. The 94 x 94 mm fixing pattern with 6.5 mm holes is easy to mount on a pipe-rack bracket or a plate; use captive stainless screws for the cover. Finish with insulation testing, a check that every unused entry is closed with a certified plug, and a signed inspection record.
A sensible service routine for SAG111108: inspect, clean, retighten, document. Entries in the walls are threaded, so check for thread damage and gland tightness at inspection; the lid gasket is silicone. Keep spare cover screws and a gasket on file, never apply paint over the machined joint and record each opening of the cover in the plant inspection log.
Ordering information and FAQ summary
Buyers who ask for Cortem SAG111108 frequently add glands, stopping plugs, terminals and DIN rails to the same enquiry. Say in the RFQ whether the box should be empty or equipped, and list the entry sizes and thread type so the supply can be matched to your cable plan.
Treat the code SAG111108 as the whole order specification: it fixes the size, the entry layout and the family. When you replace a unit, check the old nameplate, the fixing pattern and the certificate number, then confirm them against the data above; the marking to match is II 2GD Ex eb IIC T6/T5/T4 Gb / Ex tb IIIC T75/T110°C Db, IP66.
In summary, SAG111108 is the small thick-walled box for threaded entries; the answers cover walls, size, terminals, impact rating and the RFQ.
Documents and quotation
You will find the SA/SAG datasheet attached as a PDF. When you are ready, send the RFQ quoting Cortem SAG111108, the number of pieces and where the goods must go, and mention any requirement for documentation or special options.
Other Models in the SA/SAG Range
Seven Star LLC supplies models from the SA/SAG range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Cortem SAG302318 Deep Ex eb Heavy-Wall Junction Box | Switchgear, Enclosures & Distribution | View details |
| Cortem SA171108 Ex eb Aluminium Junction Box | Switchgear, Enclosures & Distribution | View details |
| Cortem SAG111108 Ex eb Heavy-Wall Junction Box | Switchgear, Enclosures & Distribution | You are viewing this model |
Datasheets & Documents
- Datasheet Cortem SAG111108 Ex eb Heavy-Wall Junction Box Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Cortem is the Italian maker of explosion-proof and increased-safety electrical equipment: Ex d and Ex e lighting, enclosures, control stations, plugs and sockets, cable glands and signalling devices. Marco Rossi and Renato Gratton founded the company on 24 February 1968 in Villesse, in the Friuli Venezia Giulia region of north-east Italy. Cortem S.p.A. heads the Cortem Group, which also includes Elfit and the Fondisonzo foundry, and supplies onshore and offshore oil and gas, chemical and industrial plants.
Seven Star LLC is an independent supplier in Muscat. We list Cortem junction boxes, lighting, plugs and sockets and control stations for oil and gas and process projects in Oman and the GCC.
Cortem company profile
| Founded | 24 February 1968, Villesse (Gorizia), Italy |
|---|---|
| Founders | Marco Rossi and Renato Gratton |
| Name | From the Italian for electromechanical construction and technical representation |
| Group companies | Cortem S.p.A., Elfit and Fondisonzo |
| Approvals | ATEX and IECEx certified explosion-protected equipment |
| Product families | Ex d and Ex e luminaires and LED fittings, emergency and exit lights, obstruction lights, junction and control boxes, control stations, plugs and sockets, cable glands, alarm and signalling devices |
Milestones
- 1968: Marco Rossi and Renato Gratton found Cortem in Villesse on 24 February.
- 2011: Research and development on LED lighting for hazardous areas begins.
- 2012: The first Cortem LED fixture series is launched.
- 2022: The third generation of Cortem LED fixtures is released.
Cortem product series
Enclosures include the EJBX stainless steel Ex d junction boxes, EJBC aluminium Ex d boxes for gas group IIC, the SA and SAG Ex eb aluminium boxes in 18 sizes and the EJBE and EJBXE Ex de control and distribution boards. Control and power connection products include the CMD Ex e fibreglass control stations and the PYN, SPYN and CMBSP07 Ex plugs and sockets from 16 to 125 A.
Lighting covers the SLED-ME and EVL-40 Ex LED floodlights, the Ex nR SLED-MN and EVNL-40 floodlights for zone 2, the LIFEX-M linear fixture, the FLOWEX high bay, the EVML low bay, STREETEX street lighting and the XLFE-LIB and XLFE-MIA obstruction lights for stacks and towers. The GRDE-4200 is an electronic earthing system for road tanker loading bays.
Where Cortem equipment is used
Refineries, gas plants, tank farms and loading terminals, offshore platforms and ships, chemical and pharmaceutical plants and mining. Products are certified to ATEX and IECEx, with other schemes according to model.
Cortem products we list
Ordering Cortem products: what we need
Send the model code, the zone and gas or dust group, temperature class, ingress protection, the certification scheme required, and for enclosures the size, entries and internal components. For lighting give the wattage, voltage and mounting; for plugs and sockets the current, poles and voltage.
Facts checked against Cortem Group's published company history, October 2026.
Browse Cortem products by category: Automation Accessories.
FAQ
Questions about the Cortem SAG111108 Ex eb Heavy-Wall Junction Box
Answers from our engineering team on installation, compatibility and integration.
01Why choose Cortem SAG111108 over an SA box?
The G means thick 7 mm walls, so the body accepts tapered threaded entries; the thinner SA walls only take clearance holes.
02What are the dimensions of Cortem SAG111108?
110 x 110 x 83 mm outside and 96 x 96 x 64 mm inside, with a weight of 0.75 kg.
03How many terminals does Cortem SAG111108 hold?
Up to 16 of 1.5 mm2, 11 of 2.5 mm2, 9 of 4 mm2, 7 of 6 mm2 and 5 of 10 mm2 as a rough guide.
04What impact rating does Cortem SAG111108 have?
The series carries IK10 and IP66, with polyester RAL 7035 coating.
05How do I request Cortem SAG111108?
Send an RFQ with the part number SAG111108, quantity and delivery place in Oman or the GCC.


















Reviews
There are no reviews yet.