Brand:

Cortem EJBXE-4B Stainless Ex de Control Board Size 4B

Description

Cortem EJBXE-4B at a glance

EJBXE-4B is the Cortem code for a stainless steel Ex de control board enclosure in size 4 with shallow depth, taken from the EJBXE stainless steel Ex de control board series (AISI 316L Ex d enclosure with Ex e terminal enclosure). Dimensions are 771 x 332 x 217 mm outside, with an Ex d interior of 360 x 260 x 165 mm, an Ex e interior of 270 x 246 x 166 mm and a mass of 73 kg. The sheet gives the marking II 2GD Ex de IIB+H2 Gb / Ex tb IIIC Db, IP66 and cites ATEX CESI 15 ATEX 066U and IECEx CES 15.0018U for the empty enclosure.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Treat the summary below as a reading aid for the published data sheet and confirm details against its current issue.

Design points worth noting

  • AISI 316L stainless construction for the Ex d and Ex e compartments
  • Shallow size-4 body with 165 mm interior depth
  • Cortem TP sealed bushings in stainless steel on request
  • Quartz sand blasted surface
  • Terminals up to 2×36 WDU 2.5

Cortem EJBXE-4B technical specifications

Part number EJBXE-4B
Series (270, 246, 166)
Outside dimensions A x B x C x D 771 x 332 x 217 x 306 mm
Ex d inside a x b x c1 360 x 260 x 165 mm
Ex e inside a1 x d x c2 270 x 246 x 166 mm
Mounting X x Y, F 300 x 330 mm, F = 11
Weight 73 kg
Marking, empty enclosure II 2GD Ex de IIB+H2 Gb, Ex tb IIIC Db, IP66
Certificates, empty enclosure CESI 15 ATEX 066U; IECEx CES 15.0018U
Control version marking II 2GD Ex de IIB+H2 T6/T5 Gb, Ex tb IIIC T85/T100°C Db (CESI 12 ATEX 026)
Ambient range -50°C to +80°C empty (-40°C with polycarbonate lights)
Ex d rated voltage and current max. 690 Vac; 50 A; 50 to 60 Hz
Dissipation T6 / T5 with lights / T5 without, +40°C 75 W / 75 W / 130 W
Dissipation at +55°C 56 W / 56 W / 100 W
Ex e terminals WDU 2.5, vertical / horizontal 2×36 / 2×36
Ex d body and lid AISI 316L stainless steel, quartz sand blasted
Mounting feet 4 feet welded onto the body
Gasket Silicone, resistant to acids, hydrocarbons and temperature extremes

How EJBXE-4B differs from other EJBXE variants

The table below shows where EJBXE-4B sits against its siblings in the EJBXE family. Dimensions, weight, capacity and the numbers of entries all change from one code to the next, so the code you order matters.

  • Weight 73 kg, against 34 kg for aluminium EJBE-4B.
  • Outside depth 217 mm versus 223 mm for EJBE-4B.
  • Fixing centres 300 x 330 mm, compared with 350 x 330 mm for EJBE-4B.
  • Ex d interior 360 x 260 x 165 mm, 2 mm deeper than the 163 mm of EJBE-4B.

Where EJBXE-4B is used

Where would you use EJBXE-4B? Think of cable marshalling at pump skids, instrument cabling on process units, local control points beside motors, and branch junctions along cable trays at utilities, water and power sites across Oman and the GCC. It fits corrosive coastal process areas and shipyard or marine terminals where a mid-size stainless control board with a separate terminal box is needed. The manufacturer lists refineries, petrochemical plants, onshore and offshore installations and loading wharfs as target sectors for this family.

Selection checklist

Compatibility checks for EJBXE-4B are straightforward. Zone and group: see II 2GD Ex de IIB+H2 Gb / Ex tb IIIC Db, IP66. Temperature: -50°C to +80°C without polycarbonate indicator lights on the lid (-40°C with them) for the empty enclosure. Volume and wiring space: see the dimension rows above. Dissipation limits are 75 W (T6) and 130 W (T5 without lights) at +40°C, and 56 W and 100 W at +55°C. Glands, stopping plugs and terminals added later should all carry their own Ex certification that suits the box.

Mounting, start-up and service

To install EJBXE-4B, mark the drilling pattern from the dimensional drawing, fix the box, connect the protective earth and run the cables through correctly fitted glands. Mounting uses 300 x 330 mm fixing centres and 11 mm holes on the welded feet, so measure the support frame to match. Complete a pre-energising inspection that covers the joint surfaces, gasket condition, torque of the cover screws and the identification of circuits.

Routine care for EJBXE-4B is light: look over the coating and gasket during planned inspections, keep the joint surfaces clean and undamaged, and re-tighten cover screws that have been disturbed. Rinse salt deposits regularly and check that the lost-wax cast hinges and the flange gasket stay in good order. Never paint the flame or sealing surfaces and never modify the enclosure outside what the certificate allows.

Related products, ordering and FAQ summary

Buyers who ask for Cortem EJBXE-4B frequently add glands, stopping plugs, terminals and DIN rails to the same enquiry. Say in the RFQ whether the box should be empty or equipped, and list the entry sizes and thread type so the supply can be matched to your cable plan.

Accuracy of the part number saves time: EJBXE-4B is not the same as the codes next to it in the EJBXE range. Compare the nameplate, the fixing dimensions and the certificates before ordering, and keep the marking II 2GD Ex de IIB+H2 Gb / Ex tb IIIC Db, IP66 in the documentation package.

Recapping, EJBXE-4B is the shallow stainless version of size 4; the FAQs deal with dimensions, weight, mounting centres, dissipation and ordering.

Documents and quotation

Download the attached datasheet to confirm the figures summarised above. Then submit your RFQ with the exact part number EJBXE-4B, quantity and destination so we can reply with availability and delivery information.

Other Models in the EJBXE Range

Seven Star LLC supplies models from the EJBXE range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Cortem EJBXE-3 Stainless Ex de Control BoardSwitchgear, Enclosures & DistributionView details
Cortem EJBXE-5 Large Stainless Ex de Control BoardSwitchgear, Enclosures & DistributionView details
Cortem EJBXE-4B Stainless Ex de Control Board Size 4BSwitchgear, Enclosures & DistributionYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Cortem EJBXE-4B Stainless Ex de Control Board Size 4B Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Cortem is the Italian maker of explosion-proof and increased-safety electrical equipment: Ex d and Ex e lighting, enclosures, control stations, plugs and sockets, cable glands and signalling devices. Marco Rossi and Renato Gratton founded the company on 24 February 1968 in Villesse, in the Friuli Venezia Giulia region of north-east Italy. Cortem S.p.A. heads the Cortem Group, which also includes Elfit and the Fondisonzo foundry, and supplies onshore and offshore oil and gas, chemical and industrial plants.

Seven Star LLC is an independent supplier in Muscat. We list Cortem junction boxes, lighting, plugs and sockets and control stations for oil and gas and process projects in Oman and the GCC.

Cortem company profile

Founded 24 February 1968, Villesse (Gorizia), Italy
Founders Marco Rossi and Renato Gratton
Name From the Italian for electromechanical construction and technical representation
Group companies Cortem S.p.A., Elfit and Fondisonzo
Approvals ATEX and IECEx certified explosion-protected equipment
Product families Ex d and Ex e luminaires and LED fittings, emergency and exit lights, obstruction lights, junction and control boxes, control stations, plugs and sockets, cable glands, alarm and signalling devices

Milestones

  • 1968: Marco Rossi and Renato Gratton found Cortem in Villesse on 24 February.
  • 2011: Research and development on LED lighting for hazardous areas begins.
  • 2012: The first Cortem LED fixture series is launched.
  • 2022: The third generation of Cortem LED fixtures is released.

Cortem product series

Enclosures include the EJBX stainless steel Ex d junction boxes, EJBC aluminium Ex d boxes for gas group IIC, the SA and SAG Ex eb aluminium boxes in 18 sizes and the EJBE and EJBXE Ex de control and distribution boards. Control and power connection products include the CMD Ex e fibreglass control stations and the PYN, SPYN and CMBSP07 Ex plugs and sockets from 16 to 125 A.

Lighting covers the SLED-ME and EVL-40 Ex LED floodlights, the Ex nR SLED-MN and EVNL-40 floodlights for zone 2, the LIFEX-M linear fixture, the FLOWEX high bay, the EVML low bay, STREETEX street lighting and the XLFE-LIB and XLFE-MIA obstruction lights for stacks and towers. The GRDE-4200 is an electronic earthing system for road tanker loading bays.

Where Cortem equipment is used

Refineries, gas plants, tank farms and loading terminals, offshore platforms and ships, chemical and pharmaceutical plants and mining. Products are certified to ATEX and IECEx, with other schemes according to model.

Cortem products we list

Family Examples
Automation Accessories CMBSP07 Ex GRP Plugs and Sockets 16 A to 125 A, CMD Ex e Fibreglass Control and Signalling, EJBC Aluminium Ex d Junction Boxes for Gas, EJBE-EJBXE Ex de Control and Distribution, EJBX Stainless Steel Ex d Junction Box IIB+H2, EV Ex d Luminaires for Traditional and LED, EVL-40 Ex LED Floodlight with 40 Degree Beam, EVML Ex LED Low Bay Luminaire and 14 more

Ordering Cortem products: what we need

Send the model code, the zone and gas or dust group, temperature class, ingress protection, the certification scheme required, and for enclosures the size, entries and internal components. For lighting give the wattage, voltage and mounting; for plugs and sockets the current, poles and voltage.

Facts checked against Cortem Group's published company history, October 2026.

FAQ

Questions about the Cortem EJBXE-4B Stainless Ex de Control Board Size

Answers from our engineering team on installation, compatibility and integration.

01What are the outside dimensions of Cortem EJBXE-4B?
771 x 332 x 217 mm, according to the selection chart.
02What does Cortem EJBXE-4B weigh?
73 kg, which is about double the 34 kg of the aluminium EJBE-4B.
03What are the fixing centres of Cortem EJBXE-4B?
The chart gives 300 x 330 mm with 11 mm holes.
04What dissipation does Cortem EJBXE-4B allow?
75 W for T6 and 130 W for T5 without lights at +40°C; 56 W and 100 W at +55°C.
05How can I request Cortem EJBXE-4B?
Send an RFQ stating EJBXE-4B, quantity and delivery location in Oman or the GCC.