Brand

Orbitalum Tools

Orbitalum Tools makes machines for tube and pipe preparation and orbital welding: pipe saws, cutting and beveling machines, end prep machines, orbital weld heads and orbital welding power sources. The business is based in Singen, Germany, and was formerly the pipe-joining technology business of Georg Fischer. It was sold to a subsidiary of Illinois Tool Works (ITW) in January 2013 and renamed Orbitalum on 1 October 2013; it now operates with E.H. Wachs as ITW Orbital Cutting & Welding. Seven Star LLC supplies Orbitalum pipe saws, tube facing machines and orbital welding systems to fabricators and site contractors in Oman, and many of these machines are listed on this page.

Read the full brand profile
  • 15 products
  • 2 categories

15 products

Brand profile

About Orbitalum Tools

All brands →
Founded
1960
Headquarters
Singen, Germany
Speciality
Orbital pipe cutting and welding tools
Listed with us
15 products in 2 categories

Orbitalum Tools makes machines for tube and pipe preparation and orbital welding: pipe saws, cutting and beveling machines, end prep machines, orbital weld heads and orbital welding power sources. The business is based in Singen, Germany, and was formerly the pipe-joining technology business of Georg Fischer. It was sold to a subsidiary of Illinois Tool Works (ITW) in January 2013 and renamed Orbitalum on 1 October 2013; it now operates with E.H. Wachs as ITW Orbital Cutting & Welding.

Seven Star LLC supplies Orbitalum pipe saws, tube facing machines and orbital welding systems to fabricators and site contractors in Oman, and many of these machines are listed on this page.

Orbitalum Tools company profile

Origins Pipe-joining technology business of Georg Fischer in Singen, Germany
Ownership Illinois Tool Works (ITW) since January 2013, in its welding division
Name Orbitalum Tools GmbH since 1 October 2013
Headquarters Singen, Baden-Württemberg, Germany
Sister company E.H. Wachs (Lincolnshire, Illinois); together ITW Orbital Cutting & Welding
Product families RA and GF pipe saws and cutting and beveling machines, end prep machines, ORBIWELD open and closed weld heads, Mobile Welder and ORBIMAT orbital power sources

Orbitalum cutting, facing and welding machines

The listing follows the workflow on the tube. Cutting comes first: the GFX 3.0 pipe cutting and beveling machine and the portable PS 4.5 Plus pipe saw. The RPG 4.5 then squares and faces the tube end ready for a butt weld without filler.

On the welding side, the Mobile Welder and Smart Welder Plus are orbital TIG power sources that store and run the weld program. They drive the weld heads:

  • ORBIWELD 17 and ORBIWELD 19, enclosed micro heads for small-bore tube
  • ORBIWELD TP, an open head for pipe
  • P16 EVO, for tube-to-tube-sheet welds
  • DVR M, a rotary device that turns the workpiece under a fixed torch

Where Orbitalum equipment is used

Orbital welding and tube preparation of this kind are used wherever a weld has to be repeatable and documented: semiconductor gas lines, pharmaceutical and biotech process piping, food and beverage plants and heat exchanger manufacturing. In the GCC that translates into clean utility and process piping in pharmaceutical and dairy plants, instrument and analyzer tubing, gas distribution lines and tube-sheet work on heat exchangers.

Orbitalum Tools products we list

Family Examples
Orbital Pipe Welding Systems DVR M Welding Rotary Device for Orbital TIG, Mobile Welder OC Plus Orbital Power Source, Mobile Welder Orbital Welding Power Source, ORBIWELD 12 Micro Orbital Weld Head, ORBIWELD 17 Micro Orbital Weld Head, ORBIWELD 19 Micro Orbital Weld Head, ORBIWELD TP Open Orbital Weld Head, P16 EVO Tube-to-Tube-Sheet Orbital Weld Head and 1 more
Pipe Cutting & Bevelling Machines GF 12 Pipe Cutting and Beveling Machine, GF 4 Pipe Cutting and Beveling Machine, GF 6 Pipe Cutting and Beveling Machine, GFX 3.0 Pipe Cutting and Beveling Machine, PS 4.5 Plus Portable Pipe Saw, RPG 4.5 Tube Squaring and Pipe Facing Machine

Ordering Orbitalum machines: what we need

Tell us the tube or pipe outside diameter range, wall thickness and material first, because every Orbitalum machine has a defined working range. For a saw or facing machine, add the mains voltage or battery version and the blade or tool bit type. For welding, state the joint type (tube to tube, fitting, tube sheet), whether filler wire is needed, the power source you already own and the clamping shells or collets by diameter. For spare parts, send the machine type, serial number and the part code from the manual. We check the selection against the manufacturer’s documentation.

Facts checked against trade press reports on the 2013 ITW acquisition and Orbitalum company literature, October 2026.

Request a Quote for Orbitalum Tools Products

Looking for Orbitalum Tools parts not listed here, or pricing for a project? Send us the part numbers and quantities. Seven Star LLC sources genuine Orbitalum Tools products for customers across Oman and the GCC and replies with a formal quotation.

Free, no-obligation quotation · takes about 1 minute

Other enquiries: [email protected] · WhatsApp

FAQ

Questions about Orbitalum Tools

Common questions about Orbitalum Tools equipment, part numbers and supply to Oman and the GCC.

01How do I choose between ORBIWELD 17, ORBIWELD 19 and ORBIWELD TP weld heads?
Start with the tube outside diameter and the space around the joint. Orbitalum lists the ORBIWELD 17 for tube from 3 mm to 17.2 mm OD and the ORBIWELD 19 for 3 mm to 19.05 mm, both as enclosed heads for small-bore work. The ORBIWELD TP is an open weld head made in several sizes for larger pipe diameters. Send your size range and joint type.
02Which Orbitalum power source works with which weld head?
Orbitalum power sources and weld heads are designed as a system, but not every head runs on every power source, and cooling and wire feed options differ. Before ordering a head, send the model and serial number of your Mobile Welder, Smart Welder or older ORBIMAT unit. We check the combination in the manufacturer's compatibility data and list any adapter cable required.
03What pipe sizes do the GFX 3.0 and RPG 4.5 cover?
According to published data for these machines, the GFX 3.0 cuts tube and pipe from 6 mm to 78 mm outside diameter, and the RPG 4.5 faces tube from 12.7 mm to 114.3 mm outside diameter. The wall thickness limit depends on the material. Check both against the manufacturer's data sheet for your case, and choose saw blades and tool bits to suit the alloy.
04What do I need to state when ordering clamping shells, blades or tool bits?
For clamping shells and collets, give the machine or weld head type and the exact tube outside diameter in millimeters or inches. For saw blades, give the machine type, the wall thickness and the material. For facing tool bits, give the RPG model and the material. Part codes from the operating manual, where you have them, make the match certain.
05Is Seven Star LLC an Orbitalum distributor?
No. Seven Star LLC is an independent industrial supplier and is not an authorized Orbitalum Tools distributor or service partner. We source Orbitalum machines, weld heads and consumables through commercial channels, check the selection against the manufacturer's documentation, and provide the datasheet and operating manual references with the order on request.