- Automation & ControlView all 2,895 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand
Hypertherm
Hypertherm is an American manufacturer of plasma, laser and waterjet cutting systems, founded in 1968 in Hanover, New Hampshire, by Dick Couch and Bob Dean. The two engineers set out to commercialise the water-injection plasma arc cutting process they had invented together, starting in a two-car garage. The company, now trading as Hypertherm Associates, has been owned by its employees (associates) since 2001 and is still based in Hanover. Seven Star LLC lists Hypertherm plasma cutting systems from the Powermax, HPR and XPR families and supplies them to fabricators and maintenance shops in Oman.
Read the full brand profile ↓- 12 products
- 1 category

12 products
Brand profile
About Hypertherm
- Founded
- 1968
- Headquarters
- Hanover, New Hampshire, USA
- Speciality
- Plasma cutting systems
- Listed with us
- 12 products
Hypertherm is an American manufacturer of plasma, laser and waterjet cutting systems, founded in 1968 in Hanover, New Hampshire, by Dick Couch and Bob Dean. The two engineers set out to commercialise the water-injection plasma arc cutting process they had invented together, starting in a two-car garage. The company, now trading as Hypertherm Associates, has been owned by its employees (associates) since 2001 and is still based in Hanover.
Seven Star LLC lists Hypertherm plasma cutting systems from the Powermax, HPR and XPR families and supplies them to fabricators and maintenance shops in Oman.
Hypertherm company profile
| Founded | 1968, Hanover, New Hampshire, USA |
|---|---|
| Founders | Dick Couch and Bob Dean |
| Headquarters | Hanover, New Hampshire, USA |
| Ownership | Employee-owned; associate ownership began in 2001 |
| Product families | Powermax air plasma systems, XPR and HPRXD mechanised plasma, consumables (electrodes, nozzles, shields, swirl rings), torches, CNC controls and nesting software, waterjet pumps and parts |
Milestones
- 1968: Dick Couch and Bob Dean start Hypertherm as a unit of the consulting firm Creare.
- 1971: Dick Couch buys the majority stake and becomes CEO.
- 2001: Hypertherm begins transferring ownership to its associates.
- 2018: Hypertherm marks 50 years of industrial cutting.
Hypertherm plasma families listed here
The number in each Hypertherm model name is its output current class in amperes:
- Powermax30 XP and Powermax125: air plasma systems, from portable to heavy duty
- Powermax65 SYNC and Powermax105 SYNC: the SYNC generation of Powermax
- HPR400XD: HyPerformance mechanized plasma
- XPR300: X-Definition mechanized plasma
The listing also includes the Powermax45 and 85 SYNC, XPR170 and XPR460. The manufacturer also lists HPR800XD and MAXPRO200, together with Duramax torches, EDGE Connect CNC and ProNest software.
Where Hypertherm systems are used
Hypertherm names heavy equipment, industrial pressure vessels, job shops, steel service centers, shipbuilding and structural steel as its main industries. Powermax units are used for hand cutting and gouging in workshops and on site, and can also be run on a cutting table with a machine torch. HPR and XPR systems are built into CNC machines for production cutting of plate, a common setup in GCC fabrication yards.
Hypertherm products we list
Ordering Hypertherm equipment and consumables: what we need
For a system, send the model, the input voltage and phases at your site, the torch type (hand or machine) and the lead length. Hypertherm sells most systems under a configuration part number, so send that number if you have it. For consumables, send the system model, the torch model, the cutting current and the process (cutting, gouging, shielded or fine cut), or simply the part numbers printed on the old parts. For mechanized systems, tell us the make of the cutting table and CNC.
Frequently requested Hypertherm models: Hypertherm XPR460 Plasma Cutting System.
Facts checked against Hypertherm press releases and company fact sheets, October 2026.
Hypertherm products by category
Request a Quote for Hypertherm Products
Looking for Hypertherm parts not listed here, or pricing for a project? Send us the part numbers and quantities. Seven Star LLC sources genuine Hypertherm products for customers across Oman and the GCC and replies with a formal quotation.
- Genuine OEM products
- Supply across Oman & the GCC
- Formal quotation from our sales team
Free, no-obligation quotation · takes about 1 minute
Other enquiries: [email protected] · WhatsApp
FAQ
Questions about Hypertherm
Common questions about Hypertherm equipment, part numbers and supply to Oman and the GCC.
01What is the difference between Powermax and Powermax SYNC?
Both are Hypertherm air plasma systems. The SYNC models, listed by the manufacturer as Powermax45, 65, 85 and 105 SYNC, are a newer generation with their own torches and consumables. Because parts differ between generations, state SYNC or non-SYNC and the torch model when ordering consumables.
02How do I choose between HPR400XD and XPR300?
Both are mechanized plasma systems for CNC tables. The manufacturer lists HPR under HyPerformance and XPR under its X-Definition class, with XPR170, XPR300 and XPR460 as the available sizes. The choice depends on plate thickness, cut quality target and what your table builder supports, so involve the table maker.
03How do I identify the right Hypertherm consumables?
Consumables are specific to the system, torch, current and process. Each part carries a six-digit part number. Send those numbers, or send the system and torch model with the amperage and the process you run. We check the combination against the Hypertherm consumables chart before quoting.
04Can a Powermax be used on a CNC table?
Yes, Powermax systems can be ordered with a machine torch and interface for mechanized cutting as well as with a hand torch. The configuration part number differs between the two. Tell us the table make and the interface your CNC needs so the correct configuration is checked.
05Is Seven Star LLC a distributor of Hypertherm?
No. Seven Star LLC is an independent industrial supplier based in Muscat. We source Hypertherm cutting systems and consumables through commercial channels, check the model or order code against the manufacturer's documentation before quoting, and provide the manufacturer's datasheet and the certificates the manufacturer issues with the order on request.




















