- Automation & ControlView all 2,760 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- HMI Displays
- Pneumatic Cylinders
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Rotork
Rotork IQD12 DC Multi-Turn Electric Valve Actuator
Description
Rotork IQD12 overview
The Rotork IQD12 is the direct-current version of the IQ multi-turn actuator. It is aimed at remote or critical installations where valves must keep working from battery-backed or solar-charged supplies, and Rotork publishes electrical data for 24 VDC, 48 VDC and 110 VDC. For the 48 VDC case the Rotork IQD12 is listed with a rated torque of up to 68 Nm (50 lbf.ft). Rotork now marks the document containing this data as legacy, so the exact IQD12 designation matters for plants maintaining older installations.
The IQD motor is a low inertia permanent magnet design in a totally enclosed non-ventilated housing, with class F insulation, class B temperature rise and dual embedded thermostats set at 132 °C. Like the rest of the IQ family it relies on torque switch protection measured at the output, so the motor and valve are protected without traditional motor overload devices.
This page is intended to help engineers and purchasers identify the IQD12 quickly, compare it with neighbouring sizes and prepare a clear enquiry. All figures come from Rotork’s own published electrical and specification documents, and where a value is not published we do not quote one.
Key features of the IQD12 actuator
- DC supply operation for the IQD12, suited to battery backed and solar powered valve stations.
- Solar mode sleep function: the actuator control current drops to 10 mA maximum when idle and wakes on an open, close or ESD command or a separate wake-up signal.
- Three modes are described by Rotork: standard (sleep disabled), solar, and solar plus.
- Permanent magnet motor with torque switch protection and embedded thermostats.
- Extended duty cycles are available with a higher thermostat and class H insulation for non-hazardous areas.
- Same IQ sealed enclosure, local controls and non-intrusive setting.
IQD12 technical specifications
| Parameter | Value |
|---|---|
| Manufacturer | Rotork |
| Model | IQD12 |
| Range | IQD direct-current multi-turn electric actuator |
| DC supplies published | 24 VDC, 48 VDC and 110 VDC |
| Data shown (48 VDC) | Rated torque up to 68 Nm (50 lbf.ft) |
| Motor | Low inertia permanent magnet motor, TENV, class F insulation, class B temperature rise |
| Motor protection | Dual embedded thermostat (132 °C), stall protection |
| Listed speeds (48 VDC) | 18, 24, 36 and 48 rpm |
| Starting / stall current at max torque row | 22.4 A |
| Rated torque current at max torque row | 7.5 A |
| Solar mode | Control draw reduced to 10 mA maximum when sleeping |
| Source of electrical data | PUB002-121 |
IQD12 electrical and performance data
The table lists each output speed published for the IQD12 under 48 VDC. Rotork compiles the values from averaged production test data, so use them for cable and protection sizing rather than as guaranteed unit values.
| Speed (rpm) | Rated torque (Nm) | Rated torque (lbf.ft) | Starting / stall current (A) | Rated torque current (A) | Average load current (A) | Average load power (kW) |
|---|---|---|---|---|---|---|
| 18 | 68 | 50 | 22.4 | 7.5 | 5.1 | 0.2 |
| 24 | 68 | 50 | 22.4 | 7.5 | 5.1 | 0.2 |
| 36 | 61 | 45 | 22.4 | 7.5 | 5.1 | 0.2 |
| 48 | 54 | 40 | 22.4 | 7.5 | 5.1 | 0.2 |
The 24, 48 and 110 VDC builds of the IQD12 family draw very different currents for the same torque, so specify the DC voltage first before comparing speeds.
Typical applications in Oman and the GCC
In oil and gas facilities in Oman, the IQD12 is specified on isolation and control valves in gathering stations, pipelines and tank farms, where an actuator with integral controls and a lockable local/stop/remote selector simplifies operations. Utilities and power plants use similar IQD actuators on cooling water, feedwater and fuel lines. Water and desalination operators across the GCC rely on them for intake, transfer and distribution valves, where the sealed enclosure copes with humidity and dust. In manufacturing and petrochemical sites the IQD12 appears on process utilities and skid packages. Because the actuators are described by Rotork as suitable for indoor and outdoor use, with ambient limits of minus 30 to plus 70 degrees Celsius in the IQ specification, they suit the hot coastal climate of Muscat, Sohar and Duqm.
Typical valve types include gate and globe valves for multi-turn actuators and ball, plug and butterfly valves for part-turn actuators, so confirm the valve stem or shaft details when you request the IQD12.
Selection and compatibility notes for the IQD12
When sizing the supply for the IQD12, check both the DC voltage and the starting current in the table, because a DC feeder with limited capacity is the main design constraint. In solar mode the control package sleeps between operations to save power, so the remote control circuit availability should be considered; Rotork lists the sleep function options as standard, solar and solar plus. Confirm battery capacity against the number of strokes per day.
A short guide to reading the Rotork electrical data helps when comparing builds. Rated torque is the catalogued torque output at full load and represents a torque switch setting of 100 percent. The starting or stall figure is the current at the start of movement or under stall, and standard IQ protection limits torque to about 150 percent of rated when torque switch bypass is enabled, with stall limited to a maximum of 5 seconds. Rated torque current is the average current at the catalogue torque, while the average load columns correspond to roughly one third of rated torque. The IQD motor uses low inertia rotors, permanent magnet construction, a totally enclosed non-ventilated housing, class F insulation, class B temperature rise, dual embedded thermostats at 132 °C and sealed bearings lubricated for life. Power supply cable sizing should be checked against the starting current, and Rotork notes that fuses or trip devices should protect the supply cable under fault conditions rather than the motor.
Match the IQD12 to the valve by the maximum valve torque including a safety margin, the stroke or number of turns, the mounting flange and the required operating time. Rotork’s sizing guidance says the actuator must guarantee valve closure at the specified differential pressure and temperature, with enough margin that the torque switch can still trip at maximum valve torque when the supply is 10 percent below nominal. Mention any hazardous-area, SIL or fieldbus requirement in your enquiry, because the certification of an actuator depends on the exact build.
Installation and commissioning
Check the polarity and cable size for the DC feeder, as the IQD12 draws a high starting current at low voltage. Fit the drive coupling to the valve stem and wire the control terminals. Choose the sleep mode (standard, solar or solar plus) with the Rotork setting tool and confirm that remote open, close or ESD signals wake the unit correctly in a bench test before leaving site.
Rotork supplies a commissioning kit with its actuators comprising an installation manual, wiring diagram and cover seals. Keep the terminal compartment dry during cabling, and torque the cover fasteners evenly after wiring so the IQD12 retains its enclosure rating.
Maintenance and spare parts for the IQD12
Rotork designs the gear case as an oil-filled enclosure suitable for operation at any angle, and the motor and internal electrical elements are sealed from the environment, so routine maintenance on the IQD12 is mainly visual and functional. Check the cable glands, cover seals and fasteners during shutdowns, exercise infrequently used valves, and review the datalogger or event records for torque trends that point to valve wear. Replace seals if covers were opened. For hard-to-find parts and replacement units please send the full nameplate details together with the model IQD12.
FAQ summary
The most common questions we receive about the IQD12 concern its torque rating, available output speeds, supply voltage options, and how to specify a replacement. In short, the IQD12 is a Rotork DC powered multi-turn electric valve actuator; the data on this page is taken from the Rotork documents listed below; and the exact build always depends on the voltage, speed and options that you confirm in your RFQ. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.
Documents and quotation
The datasheet for the IQD12 is the Rotork electrical data document PUB002-121, which you can download from this page when available. To obtain pricing and lead time, send the RFQ with the part number IQD12, the quantity, supply voltage and frequency, valve type and any special requirements, and our team will respond promptly. Please note that the product is described by its model designation and that final configuration is confirmed against the manufacturer’s data.
Other Models in the IQD Range
Seven Star LLC supplies models from the IQD range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Rotork IQD10 DC Multi-Turn Electric Valve Actuator | Electric Actuators | View details |
| Rotork IQD12 DC Multi-Turn Electric Valve Actuator | Electric Actuators | You are viewing this model |
| Rotork IQD18 DC Multi-Turn Electric Valve Actuator | Electric Actuators | View details |
Datasheets & Documents
- Datasheet Rotork IQD12 DC Multi-Turn Electric Valve Actuator Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Rotork is a British flow control company best known for electric valve actuators. Jeremy Fry founded Rotork Engineering Company in Bath in 1957, the year its first actuator, the 100A, went on sale, and the group is still headquartered in Bath and listed on the London Stock Exchange. Today Rotork makes electric, pneumatic, hydraulic and electro-hydraulic actuators, gearboxes, precision regulators and valve positioners.
Seven Star LLC is an independent supplier listing Rotork actuators, Rotork Fairchild regulators, YTC positioners and spare parts for buyers in Oman and the GCC. Replacement units are matched from the actuator nameplate and wiring diagram number.
Rotork company profile
| Origin | Founded by Jeremy Fry in 1957 in Bath, England; first product the 100A valve actuator |
|---|---|
| Headquarters | Brassmill Lane, Bath, United Kingdom |
| Ownership | Rotork plc, a public company listed on the London Stock Exchange |
| Acquired brands | Fairchild precision pneumatic controls (2011, Winston-Salem, USA), YTC valve positioners (Young Tech Co., Seoul, 2014), Mastergear gearboxes (2016) |
| Product families | Intelligent electric actuators, control valve actuators, electro-hydraulic and fluid power actuators, gearboxes, precision regulators, positioners and network control systems |
Milestones
- 1957: Jeremy Fry founds Rotork in Bath, England; the first product is the 100A valve actuator.
- 2011: Fairchild precision pneumatic controls (Winston-Salem, USA) is acquired.
- 2014: YTC valve positioners (Young Tech Co., Seoul) is acquired.
- 2016: Mastergear gearboxes is acquired.
Rotork actuators, regulators and positioners
| Series | Type | Typical use |
|---|---|---|
| IQ3 | Intelligent multi-turn electric actuator | Gate and globe valves, penstocks and sluice gates; non-intrusive setup with a Bluetooth setting tool, double-sealed enclosure, data logging |
| IQT3 | Intelligent part-turn electric actuator | Ball, butterfly and plug valves and dampers, with the same setup and diagnostics as IQ3 |
| CVA | Precision control valve electric actuator | Continuous modulating control of linear and part-turn control valves where instrument air is not available |
| CMA | Compact modulating electric actuator | Small control valves, chemical injection and metering pumps |
| Skilmatic SI3 | Self-contained electro-hydraulic actuator | Spring-return fail-safe and ESD duty with partial stroke testing, needing only an electrical supply |
| GP / GH | Scotch yoke pneumatic (GP) and hydraulic (GH) actuators | Large quarter-turn valves on pipelines and ESD service; spring-return or double-acting |
| CP | Compact pneumatic quarter-turn actuator | Smaller on-off ball and butterfly valves on plant air |
| Fairchild 10, 30, 55, 66, M11, 81 | Precision pressure regulators | Instrument air to positioners and actuators, test benches; Model 66 in stainless steel for corrosive and offshore sites |
| Fairchild 1000 | No-bleed precision regulator | Saves instrument air or gas where continuous bleed is not acceptable |
| Fairchild 10BP, 4000ABP | Back pressure regulators | Holding upstream pressure in process and test systems |
| YTC YT-1000, YT-3300 | Valve positioners | Electro-pneumatic (YT-1000) and smart HART (YT-3300) positioning of linear and rotary pneumatic actuators |
Where Rotork equipment is used
Rotork actuators are common on oil and gas pipelines and terminals, refineries and gas plants, water and wastewater networks, desalination plants and power stations. Electric IQ actuators handle isolation valves on long pipelines and water mains, often networked over Rotork Pakscan, Modbus or another fieldbus. Skilmatic and scotch yoke actuators cover emergency shutdown valves, and Fairchild regulators and YTC positioners sit on pneumatic control valves throughout process plants.
Ordering Rotork actuators and spare parts: what we need
Send photos of the actuator nameplate with the model, serial number and wiring diagram number; the wiring diagram is usually inside the terminal cover. Rotork can identify the original build, including options and control interface, from the serial number. For a new application add the valve type and size, required torque or thrust, operating time, mounting flange (ISO 5210 or ISO 5211), power supply, control signal or network protocol, fail-safe requirement and hazardous-area marking. For regulators and positioners send the full model code and the pressure or signal ranges.
Facts checked against Rotork plc company information and product data, October 2026.
Browse Rotork products by category: Valve Actuator, Regulators, Valve Positioner.
FAQ
Questions about the Rotork IQD12 DC Multi-Turn Electric Valve Actuator
Answers from our engineering team on installation, compatibility and integration.
01What is the maximum rated torque of the Rotork IQD12?
In the Rotork electrical data for 48 VDC, the IQD12 is listed with a maximum rated torque of 68 Nm (50 lbf.ft) at its 18 rpm build, and a lowest listed torque of 54 Nm at the fastest speed shown.
02Which output speeds are listed for the IQD12?
The data table for 48 VDC lists 18, 24, 36 and 48 rpm for the IQD12. Other speeds, supply voltages or options may exist, so confirm the exact build in your RFQ.
03What current does the IQD12 draw at rated torque?
For the 18 rpm build under 48 VDC, Rotork lists a rated torque current of 7.5 A and a starting or stall current of 22.4 A. Individual production test certificates are available from the manufacturer for exact unit values.
04Can the IQD12 be set up without opening the covers?
Rotork describes setting of torque levels, position limits and indication contacts for the IQ family over an infrared or Bluetooth wireless interface, without removing the actuator covers and, where needed, without mains power.
05How do I request a quotation for the IQD12?
Send the part number IQD12 with quantity, speed, supply voltage, valve details and any hazardous-area or network needs, and we will answer your RFQ. Seven Star LLC is an independent supplier and is not affiliated with Rotork.


















Reviews
There are no reviews yet.