Titan Enterprises Process Atrato Ultrasonic Flow Meter

Overview

The Titan Enterprises Process Atrato is a rugged, 316 stainless steel ultrasonic flow meter purpose-built for the demanding industrial process and control environments that a standard laboratory instrument cannot survive. Based on Titan’s proven Atrato ultrasonic measurement platform, the Process Atrato repackages that same breakthrough non-invasive technology into an IP65-sealed, chemically resistant enclosure rated to 20 bar, giving plant engineers a low-flow instrument that combines laboratory-grade accuracy with genuine process-floor durability. With no moving parts to wear, jam, or foul, the Titan Enterprises Process Atrato delivers consistent, repeatable readings across four low-flow ranges spanning 2 ml/min to 15 litres per minute, at a stated accuracy of ±1% across the entire flow range.

With fast quotation turnaround and technical support, Seven Star LLC proudly supplies the Titan Enterprises Process Atrato ultrasonic flow meter to process engineers, OEM integrators, and instrumentation buyers across Oman and the wider GCC. Facilities in Muscat, Sohar, and Salalah increasingly specify low-flow ultrasonic metering for dosing skids, additive injection, and small-bore chemical transfer lines, and Seven Star LLC ensures genuine Titan Enterprises hardware, full calibration documentation, and responsive regional technical support are available locally rather than through a distant overseas reseller.

Measurement Principle

The Process Atrato measures flow using Titan’s proprietary ultrasonic transit-time technology, in which a pair of ultrasonic transducers positioned along the flow path exchange sound pulses upstream and downstream through the liquid. The difference in transit time between the two directions is directly proportional to the fluid’s velocity, and the onboard signal-processing electronics convert that differential into a precise volumetric flow reading. Because the measurement is derived entirely from the acoustic signal path rather than from any moving component, the Titan Enterprises Process Atrato is able to measure both viscous and non-viscous liquids reliably across the full Reynolds number range, a capability that mechanical low-flow meters such as turbine or oval gear devices cannot match at these flow rates. This is the same core measurement principle that underpins the standard Titan Enterprises Atrato range, adapted for process duty in the Process Atrato variant.

This ultrasonic architecture carries substantial practical advantages for process engineers. With no impeller, gear, or rotating element in the wetted path, the Process Atrato introduces zero mechanical wear, meaning the calibrated accuracy achieved on day one is retained for the operational life of the instrument rather than degrading as bearings and gears wear down. There are no crevices for fouling media to lodge in, no bearings to seize on dry-running or low-lubricity fluids, and no pressure drop penalty from a physical flow restriction, which keeps the Titan Enterprises Process Atrato suitable for continuous duty on dosing, additive, and small-bore transfer applications where mechanical meters would require frequent maintenance intervention.

Engineering Design of the Titan Enterprises Process Atrato

The Titan Enterprises Process Atrato is built around a solid 316 stainless steel flow body, chosen specifically for its resistance to the aggressive chemicals and process fluids common in industrial dosing and transfer duty. The only other wetted materials are PEEK and the customer’s choice of elastomer seal, giving specifying engineers control over chemical compatibility on a per-application basis. The electronics housing is built in and fully sealed to IP65, protecting the internal signal-processing circuitry from washdown, humidity, and dust ingress in a way that a laboratory-grade instrument’s open enclosure cannot, which is precisely the gap the Process Atrato was engineered to close between Titan’s standard Atrato meter and the realities of a working process plant.

On the Titan Enterprises Process Atrato, electrical connection is made through a standard M12, four-pin sensor connector, simplifying field wiring and enabling quick swap-out without re-terminating loose leads. The instrument provides two frequency pulse outputs, one PNP and one NPN, giving integration flexibility across a wide range of PLC and control-system input types without requiring an external signal converter. Two multicolour LEDs on the housing give the operator immediate visual feedback on signal strength, incorrect supply voltage, and pulse output activity, so commissioning and troubleshooting can be carried out at the meter itself without needing a laptop or handheld communicator. Every Titan Enterprises Process Atrato is factory-calibrated with a pre-set K-factor, and because all meters of the same flow range share that same calibrated K-factor, units are fully interchangeable, which considerably simplifies spares holding, assembly, and set-up procedures for OEM manufacturers building the meter into their own skids and control panels.

Key Features

The Titan Enterprises Process Atrato ultrasonic flow meter combines process-grade ruggedness with the accuracy engineers expect from Titan’s ultrasonic platform, and its feature set reflects that dual focus on durability and precision.

• 316 stainless steel flow body rated to 20 bar for genuine industrial process duty rather than benchtop laboratory use only.
• IP65-sealed, built-in electronics housing that resists washdown, humidity, and dust ingress on the plant floor.
• Four low-flow measurement ranges covering 2 ml/min to 15 litres per minute for precise dosing and small-bore metering.
• Stated accuracy of ±1% across the full flow range, with repeatability figures down to 0.01%.
• No moving parts, eliminating mechanical wear, bearing seizure, and the associated recalibration drift over time.
• Dual frequency pulse outputs, one PNP and one NPN, for flexible integration with PLCs and control systems.
• Pre-set, factory-calibrated K-factor that makes same-range meters fully interchangeable for OEM assembly.
• Standard M12 four-pin sensor connector for fast, reliable field wiring and instrument replacement.

Industrial Applications

The Titan Enterprises Process Atrato is widely specified wherever a facility needs to meter a small, precise volume of liquid reliably under real process conditions rather than in a controlled laboratory setting. Typical duty includes chemical dosing and additive injection skids in water treatment plants, cooling tower biocide and scale-inhibitor dosing loops, small-bore transfer lines in food and beverage production, and low-flow monitoring on pilot and skid-mounted process units across oil, gas, and petrochemical facilities. Its 316 stainless steel construction and IP65 rating also make it a strong fit for pharmaceutical and fine-chemical manufacturing, where both chemical compatibility and washdown resistance are non-negotiable requirements.

With engineering support in Muscat, Seven Star LLC supplies the Process Atrato ultrasonic flow meter throughout the Sultanate of Oman and the broader GCC, supporting district cooling operators, desalination and water treatment plants, and process manufacturers across the Sohar and Salalah economic zones. Regional engineering teams sourcing low-flow dosing instrumentation for new-build or retrofit skids benefit from Titan Enterprises calibration certification and direct technical support from Seven Star LLC’s instrumentation division.

Technical Specifications

The table below summarizes the key technical characteristics of the Titan Enterprises Process Atrato ultrasonic flow meter, confirmed against Titan Enterprises’ official published specifications for the Process Atrato platform.

Request a Quote for Titan Enterprises Process Atrato Ultrasonic Flow Meter

Seven Star LLC invites process engineers, OEM integrators, and procurement teams across Oman and the GCC to submit a formal RFQ for the Titan Enterprises Process Atrato ultrasonic flow meter. Buyers evaluating the Titan Enterprises Process Atrato against alternative low-flow metering technologies are encouraged to request a side-by-side technical comparison. Supply is on request with lead time confirmed at quotation, and full technical datasheets are available on request for specification and approval submissions. Backed by manufacturer datasheet documentation, Seven Star LLC’s instrumentation division is available to advise on flow range selection, wetted-material compatibility, and integration into new or existing control systems – contact Seven Star LLC today to request pricing, documentation, or technical consultation on the Process Atrato platform.

Browse the full Titan Enterprises range or see more Flowmeters products supplied by Seven Star LLC in Oman and the GCC.