Brand:

Weidmuller 8951370000 CP M SNT 500W 24V 20A Power Supply

Description

Weidmuller Weidmüller 8951370000 CP M SNT 500W 24V 20A overview

Weidmuller Weidmüller 8951370000 is the order number of the CP M SNT 500W 24V 20A, catalogued as: Power supply, switch-mode power supply unit, 24 V. This page summarises what the manufacturer data sheet states for Weidmüller 8951370000, so that engineers and buyers in Oman and the GCC can check the main parameters before sending a request for quotation. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer, so every figure below is taken from the published data sheet and should be confirmed against the current document for your project.

The PRO-M family (Power, Reliable, Optimized) is described by the maker as a dependable 24 V DC supply for automation technology. A solid but slim metal housing allows installation without side gaps on the mounting rail, a wide AC and DC input range and a wide temperature range allow use almost anywhere, and high efficiency, overload resistance and power reserves are highlighted. The literature adds that three-phase members keep working in two-phase mode if one phase fails.

Catalogue status matters for this item. The manufacturer data sheet for 8951370000 carries the delivery status note: Discontinued. It gives 2016-06-30 as the availability date. The same sheet names PRO MAX 480W 24V 20A as the alternative product. Because of this status, buyers maintaining an installed plant often search for the exact number to repair or extend an existing panel without redesigning it. If stock for the exact number is the priority, state that clearly in your RFQ so that we can confirm what can be sourced.

Key features of 8951370000

The data sheet for 8951370000 lists the following headline characteristics for the CP M SNT 500W 24V 20A.

  • Nominal output of 500 W at 24 V DC ± 1 %.
  • Input range 85…264 V AC (derating at 100 V AC).
  • Efficiency stated as 90 % at 230 V AC / > 85 % at 115 V AC.
  • Protection degree IP20 with housing: Metal, corrosion resistant.
  • Parallel connection option: yes, max. 3.
  • Width 121 mm, depth 150 mm, height 130 mm.
  • Short-circuit, overload and over-temperature protection are listed as: short-circuit, overload, over-heating.

Technical specifications for 8951370000

The table collects the values printed in the manufacturer data sheet. Values that are not printed there are intentionally left out rather than estimated. The GTIN printed for 8951370000 is 4032248742585.

Parameter Value
Order No. 8951370000
Type CP M SNT 500W 24V 20A
Version Power supply, switch-mode power supply unit, 24 V
GTIN (EAN) 4032248742585
Catalogue delivery status Discontinued
Available until 2016-06-30
Alternative product named by the maker PRO MAX 480W 24V 20A
Output power 500 W
Rated output voltage 24 V DC ± 1 %
Output voltage, min. 22.5 V
Output voltage, max. 29.5 V
Nominal output current for Unom 20 A @ 60 °C 55 °C, 15 A @ 70 °C
Rated input voltage 100…240 V AC (wide-range input)
AC input voltage range 85…264 V AC (derating at 100 V AC)
DC input voltage range 80…370 V DC (Derating @ 120 V DC)
Frequency range AC 47…63 Hz
Inrush current max. 5 A
AC current consumption 2.4 A @ 230 V AC / 4.8 A @ 115 V AC
Degree of efficiency 90 % at 230 V AC / > 85 % at 115 V AC
Power factor (approx.) > 0.98 @ 230 V AC / > 0.99 @ 115 V AC
AC failure bridging time @ Inom > 20 ms @ 230 V AC / > 20 ms @ 115 V AC
Parallel connection option yes, max. 3
Overload protection Yes
Short-circuit protection Yes
Protection against over-heating Yes
Residual ripple, breaking spikes < 50 mVPP @ 24 V DC, IN
Connection system Screw connection
Protection degree IP20
Protection class I, with PE connection
Housing version Metal, corrosion resistant
Width 121 mm
Height 130 mm
Depth 150 mm
Net weight 2387 g
Storage temperature -40 °C…85 °C
Tightening torque, max. 0.6 Nm
Certificate no. (cULus) E258476

Input and output figures should be read together with the derating information in the data sheet. For 8951370000 the nominal output is 500 W at 24 V DC ± 1 %, and the output current is given as 20 A @ 60 °C 55 °C, 15 A @ 70 °C. A panel designer normally compares the continuous load of all connected devices, adds the inrush of any capacitive or motor-driven loads, and leaves headroom so that the supply does not operate at the limit of its rating at the highest cabinet temperature. The data sheet contains a derating curve, and that curve rather than the nominal value should be used when the cabinet is hot, as is common in Gulf summer conditions.

Typical applications of 8951370000 in Oman and the GCC

A DIN rail supply such as 8951370000 is used wherever 24 V DC or another low-voltage rail is needed for controllers, I/O, instruments and communication hardware. In oil and gas facilities it powers remote terminal units, marshalling cabinets and analyser shelters. In utilities and water treatment it feeds PLC panels at pumping stations, desalination skids and substations. In manufacturing it supplies machine control cabinets, conveyor drives interfaces and packaging lines. Operators of ageing plants in Oman also look for the exact order number when a failed unit has to be replaced during a short shutdown window.

Selection and compatibility notes for 8951370000

When selecting 8951370000, confirm the supply network first: the rated input voltage is stated as 100…240 V AC (wide-range input) and the AC range as 85…264 V AC (derating at 100 V AC). Check the available space against the dimensions of 121 mm width, 130 mm height and 150 mm depth, and confirm that the connection system (Screw connection) fits your wiring standard. If your plan includes redundancy, check the parallel connection entry and use external diode or redundancy modules as recommended in the maker literature. Where the data sheet lists an alternative product for 8951370000, compare terminals, width and output rating before treating it as a drop-in replacement, because mounting depth and wiring may differ between generations.

Installation and commissioning of 8951370000

Mount 8951370000 on a TS 35 rail in the orientation given in the data sheet and keep the ventilation clearances recommended by the maker so that the housing can dissipate its power loss. Connect the protective earth first, use conductors within the cross-section range printed in the data sheet, and tighten the terminals to the stated torque. Protect the input with the recommended back-up fuse or breaker, set the output voltage with the adjustment potentiometer if the data sheet provides one, and check the status LED and any signalling contact before loading the supply. Measure the output under load after commissioning and record the value for later maintenance comparison.

Maintenance and spare part planning for 8951370000

For long service life keep dust and conductive deposits away from the vents and terminals, re-tighten terminals during planned shutdowns, and compare output or switching behaviour with the commissioning record. Because 8951370000 may be requested as a spare for a running installation, keeping one unit in a clean, dry store with its paperwork can shorten outage time. Record the order number 8951370000 and the type CP M SNT 500W 24V 20A on the panel drawing so that the right item is requested when it must be replaced.

Related products and ordering notes for 8951370000

Other members of the same product family differ in output rating, width, input system and approvals, so the order number is the only safe way to identify the exact item. Quote 8951370000 together with the type CP M SNT 500W 24V 20A when you contact us. We can also help with related rail accessories, end brackets, redundancy or buffer modules and neighbouring ratings when you are reviewing a whole panel. Lead time and availability are confirmed per request, and no price is shown on this page.

Frequently asked points about 8951370000

  • What is 8951370000? It is the order number of the CP M SNT 500W 24V 20A.
  • Which family does it belong to? The PRO-M family (Power, Reliable, Optimized) is described by the maker as a dependable 24 V DC supply for automation technology.
  • Where are the dimensions? Width 121 mm, height 130 mm, depth 150 mm as printed in the data sheet.
  • How do I order? Send the RFQ with the part number 8951370000 and the required quantity.

Documents and quotation

The manufacturer data sheet for 8951370000 contains the full parameter list, approvals, derating information and accessory suggestions, and we can supply a copy of the data sheet with the quotation. To request a quotation, send your RFQ with the part number 8951370000, the type CP M SNT 500W 24V 20A and the quantity you need, plus your delivery location in Oman or the GCC. Please state if you need the exact catalogue number only or if an alternative is acceptable.

Other Models in the Pm Range

Seven Star LLC supplies models from the Pm range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Weidmuller 8951360000 CP M SNT 250W 24V 10A Power SupplyPower ModulesView details
Weidmuller 8951370000 CP M SNT 500W 24V 20A Power SupplyPower ModulesYou are viewing this model
Datasheets & Documents
  • PDF Datasheet CP M SNT 500W 24V 20A Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Weidmüller is a German family-owned maker of electrical connection and industrial electronics products, headquartered in Detmold. The company dates from 1850 and was re-established in Detmold in 1948; it specialised in terminal blocks from the 1940s onward. Weidmüller makes Klippon terminal blocks, power supplies, remote I/O and enclosures, and reported over one billion euros in revenue in 2023.

Seven Star LLC lists Weidmüller PRO MAX power supplies and SAK terminal blocks, and supplies Weidmüller components to panel shops and plants in Oman and the GCC.

Weidmüller company profile

Founded 1850, Germany
Headquarters Detmold, Germany (since 1948)
Ownership Family-owned
Revenue Over €1 billion (2023)
Product families Klippon Connect terminal blocks, PRO MAX and PRO TOP power supplies, u-remote I/O and fieldbus couplers, Klippon enclosures, connectors and tools

Milestones

  • 1850: Weidmüller is founded.
  • 1948: The company is re-established in Detmold.

Weidmüller products listed here

The listed power supplies are DIN rail switch-mode units with 24 V DC output: a PRO MAX single-phase unit rated 180 W and 7.5 A (85 to 277 V AC input), and a PRO MAX3 three-phase unit rated 240 W and 10 A (320 to 575 V AC input). The SAK series is the screw clamp feed-through terminal block family found in many existing panels. Weidmüller now flags several SAK types as being phased out and names a replacement for some of them.

Weidmüller products we list

Family Examples
Power Modules Weidmuller PRO MAX 180W 24V 7.5A DIN Rai…, Weidmuller PRO MAX3 240W 24V 10A Three-P…
Switchgear, Enclosures & Distribution Weidmuller Klippon Connect SAK Terminal…
PLC & I/O Cards Weidmuller UR20-FBC-PN-IRT-V2 u-remote P…

Ordering Weidmüller parts: what we need

Weidmüller identifies every item by a ten-digit order number, and that number is the surest way to quote. Without it, send the type printed on the part. For power supplies add input voltage and phases, output voltage and current. For terminal blocks add the conductor cross-section, color, and the end plates, cross-connections and markers you need, since accessories are specific to each series.

Facts checked against Weidmüller milestone lists and distributor profiles, October 2026.

FAQ

Questions about the Weidmuller 8951370000 CP M SNT 500W 24V 20A Power

Answers from our engineering team on installation, compatibility and integration.

01What is Weidmuller 8951370000?
8951370000 is the order number of the CP M SNT 500W 24V 20A, catalogued by the manufacturer as: Power supply, switch-mode power supply unit, 24 V.
02What are the main ratings of 8951370000?
The data sheet lists 500 W at 24 V DC ± 1 % with input 85...264 V AC (derating at 100 V AC).
03What are the dimensions of 8951370000?
The data sheet gives width 121 mm, height 130 mm and depth 150 mm, mounted on a TS 35 rail.
04Is 8951370000 still available from the manufacturer?
The data sheet shows the status: Discontinued. Available until 2016-06-30. Named alternative: PRO MAX 480W 24V 20A.
05How do I request a quote for 8951370000?
Send an RFQ to Seven Star LLC with the part number 8951370000 and the quantity. We are an independent supplier and not affiliated with the manufacturer.