Brand:

Cortem EJBXE-5 Large Stainless Ex de Control Board

Description

Cortem EJBXE-5 product summary

The Cortem EJBXE-5 listing describes a large stainless steel Ex de control board enclosure for heavy equipment in corrosive areas. The assembly measures 1115 x 432 x 327 mm outside, with an Ex d interior of 632 x 360 x 275 mm, an Ex e interior of 414 x 322 x 275 mm and a weight of 147 kg. According to the manufacturer sheet it is marked II 2GD Ex de IIB+H2 Gb / Ex tb IIIC Db, IP66 and certified under ATEX CESI 15 ATEX 066U and IECEx CES 15.0018U for the empty enclosure.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer, and every figure here is paraphrased from the published data sheet, so please confirm it against the current edition when you order.

Key features

  • AISI 316L stainless Ex d box with 275 mm interior depth
  • Separate stainless Ex e terminal compartment 414 x 322 x 275 mm
  • Terminal capacity up to 3×67 WDU 1.5 vertically
  • Welded feet and welded hinges
  • Factory sealed version available on request

Specifications of Cortem EJBXE-5

Part number EJBXE-5
Series (414, 322, 275)
Outside dimensions A x B x C x D 1115 x 432 x 327 x 382 mm
Ex d inside a x b x c1 632 x 360 x 275 mm
Ex e inside a1 x d x c2 414 x 322 x 275 mm
Mounting X x Y, F 500 x 430 mm, F = 11
Weight 147 kg
Marking, empty enclosure II 2GD Ex de IIB+H2 Gb, Ex tb IIIC Db, IP66
Certificates, empty enclosure CESI 15 ATEX 066U; IECEx CES 15.0018U
Control version marking II 2GD Ex de IIB+H2 T6/T5 Gb, Ex tb IIIC T85/T100°C Db (CESI 12 ATEX 026)
Ambient range -50°C to +80°C empty (-40°C with polycarbonate lights)
Ex d rated voltage and current max. 690 Vac; 50 A; 50 to 60 Hz
Dissipation T6 / T5 with lights / T5 without, +40°C 210 W / 210 W / 315 W
Dissipation at +55°C 160 W / 160 W / 235 W
Ex e terminals WDU 2.5, vertical / horizontal 2×67 / 3×51
Ex d body and lid AISI 316L stainless steel, quartz sand blasted
Mounting feet 4 feet welded onto the body
Gasket Silicone, resistant to acids, hydrocarbons and temperature extremes

How EJBXE-5 differs from other EJBXE variants

Siblings in the EJBXE family look alike on a drawing, but EJBXE-5 has its own numbers. Here is what sets it apart.

  • Weight 147 kg against 63 kg for EJBXE-3 and 73 kg for EJBXE-4B.
  • Ex d interior 632 x 360 x 275 mm, wider than the 300 x 220 mm of size 3.
  • Dissipation 210 W (T6) versus 75 W for size 3.
  • Fixing centres 500 x 430 mm.

Applications: oil and gas, utilities, water, industry

For GCC projects, Cortem EJBXE-5 suits the places where gas or combustible dust can appear: oil and gas wellsites, tank farms, compressor houses, chemical blending halls and the process areas of power and water plants. At this size it can accommodate drives and contactor groups in offshore modules or coastal utility plants where stainless steel is specified. Sectors named by the manufacturer for the series are oil refineries, chemical and petrochemical plants and offshore platforms.

Compatibility and selection

When choosing Cortem EJBXE-5, match the marking II 2GD Ex de IIB+H2 Gb / Ex tb IIIC Db, IP66 to the hazardous area drawing, test the quoted ambient range (-50°C to +80°C without polycarbonate indicator lights on the lid (-40°C with them) for the empty enclosure) against the hottest and coldest day on site, and check the internal volume against the wiring plan. Dissipation limits are 210 W (T6) and 315 W (T5 without lights) at +40°C, with 160 W and 235 W at +55°C. Anything fitted to the enclosure, from glands to terminals, needs its own matching certification.

Installation and maintenance guide

During installation of EJBXE-5, secure the box on a flat surface using the fixing points shown in the dimension data, connect the earth screws and tighten the cover fasteners fully so the joint and gasket do their job. Mount it on the welded feet at 500 x 430 mm centres with 11 mm holes and use lifting gear for the 147 kg unit. After wiring, check insulation resistance and continuity, record the work in the hazardous area inspection file and keep the certificate with the loop documents.

Maintenance of Cortem EJBXE-5 mainly means periodic inspection: gasket condition, corrosion on fasteners, tightness of the earth connection and the state of cable entries. Inspect the welded hinges, the quartz-blasted surface and the stainless fasteners at planned outages, and keep the drain clear if one is fitted. Replace damaged parts only with parts that match the data sheet, and keep the joint faces free of paint and dirt.

Ordering notes and FAQ summary

Along with EJBXE-5, customers often need certified cable entries, plugs, mounting accessories and neighbouring box sizes. Please tell us the thread standard, the number of cables and the temperature class your project needs; this avoids a second round of questions.

Why the exact code matters: EJBXE-5 identifies one specific body, entry layout and size within the EJBXE family, so a neighbouring code is not a drop-in replacement. For replacement purchases on older plants, compare the nameplate, the dimensions in the table above and the certificate reference before sending the order, and keep the marking II 2GD Ex de IIB+H2 Gb / Ex tb IIIC Db, IP66 on the purchase record.

In summary, EJBXE-5 is a big stainless control board; the FAQs address weight, interior size, thermal limits, terminal capacity and the RFQ.

Documents and quotation

You will find the EJBXE datasheet attached as a PDF. When you are ready, send the RFQ quoting Cortem EJBXE-5, the number of pieces and where the goods must go, and mention any requirement for documentation or special options.

Other Models in the EJBXE Range

Seven Star LLC supplies models from the EJBXE range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Cortem EJBXE-3 Stainless Ex de Control BoardSwitchgear, Enclosures & DistributionView details
Cortem EJBXE-5 Large Stainless Ex de Control BoardSwitchgear, Enclosures & DistributionYou are viewing this model
Cortem EJBXE-4B Stainless Ex de Control Board Size 4BSwitchgear, Enclosures & DistributionView details
Datasheets & Documents
  • PDF Datasheet Cortem EJBXE-5 Large Stainless Ex de Control Board Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Cortem is the Italian maker of explosion-proof and increased-safety electrical equipment: Ex d and Ex e lighting, enclosures, control stations, plugs and sockets, cable glands and signalling devices. Marco Rossi and Renato Gratton founded the company on 24 February 1968 in Villesse, in the Friuli Venezia Giulia region of north-east Italy. Cortem S.p.A. heads the Cortem Group, which also includes Elfit and the Fondisonzo foundry, and supplies onshore and offshore oil and gas, chemical and industrial plants.

Seven Star LLC is an independent supplier in Muscat. We list Cortem junction boxes, lighting, plugs and sockets and control stations for oil and gas and process projects in Oman and the GCC.

Cortem company profile

Founded 24 February 1968, Villesse (Gorizia), Italy
Founders Marco Rossi and Renato Gratton
Name From the Italian for electromechanical construction and technical representation
Group companies Cortem S.p.A., Elfit and Fondisonzo
Approvals ATEX and IECEx certified explosion-protected equipment
Product families Ex d and Ex e luminaires and LED fittings, emergency and exit lights, obstruction lights, junction and control boxes, control stations, plugs and sockets, cable glands, alarm and signalling devices

Milestones

  • 1968: Marco Rossi and Renato Gratton found Cortem in Villesse on 24 February.
  • 2011: Research and development on LED lighting for hazardous areas begins.
  • 2012: The first Cortem LED fixture series is launched.
  • 2022: The third generation of Cortem LED fixtures is released.

Cortem product series

Enclosures include the EJBX stainless steel Ex d junction boxes, EJBC aluminium Ex d boxes for gas group IIC, the SA and SAG Ex eb aluminium boxes in 18 sizes and the EJBE and EJBXE Ex de control and distribution boards. Control and power connection products include the CMD Ex e fibreglass control stations and the PYN, SPYN and CMBSP07 Ex plugs and sockets from 16 to 125 A.

Lighting covers the SLED-ME and EVL-40 Ex LED floodlights, the Ex nR SLED-MN and EVNL-40 floodlights for zone 2, the LIFEX-M linear fixture, the FLOWEX high bay, the EVML low bay, STREETEX street lighting and the XLFE-LIB and XLFE-MIA obstruction lights for stacks and towers. The GRDE-4200 is an electronic earthing system for road tanker loading bays.

Where Cortem equipment is used

Refineries, gas plants, tank farms and loading terminals, offshore platforms and ships, chemical and pharmaceutical plants and mining. Products are certified to ATEX and IECEx, with other schemes according to model.

Cortem products we list

Family Examples
Automation Accessories CMBSP07 Ex GRP Plugs and Sockets 16 A to 125 A, CMD Ex e Fibreglass Control and Signalling, EJBC Aluminium Ex d Junction Boxes for Gas, EJBE-EJBXE Ex de Control and Distribution, EJBX Stainless Steel Ex d Junction Box IIB+H2, EV Ex d Luminaires for Traditional and LED, EVL-40 Ex LED Floodlight with 40 Degree Beam, EVML Ex LED Low Bay Luminaire and 14 more

Ordering Cortem products: what we need

Send the model code, the zone and gas or dust group, temperature class, ingress protection, the certification scheme required, and for enclosures the size, entries and internal components. For lighting give the wattage, voltage and mounting; for plugs and sockets the current, poles and voltage.

Facts checked against Cortem Group's published company history, October 2026.

FAQ

Questions about the Cortem EJBXE-5 Large Stainless Ex de Control Board

Answers from our engineering team on installation, compatibility and integration.

01What is the weight of Cortem EJBXE-5?
The selection chart lists 147 kg. This applies to part number EJBXE-5 as listed in the manufacturer data sheet.
02What are the internal dimensions of the Ex d box in Cortem EJBXE-5?
632 x 360 x 275 mm, with the Ex e terminal box at 414 x 322 x 275 mm.
03How much heat can Cortem EJBXE-5 dissipate?
At +40°C 210 W for T6 and 315 W for T5 without lights; at +55°C 160 W and 235 W.
04How many WDU 2.5 terminals fit in Cortem EJBXE-5?
The sheet gives 2x67 for vertical mounting and 3x51 for horizontal mounting.
05How do I order Cortem EJBXE-5?
Send an RFQ with EJBXE-5, quantity and delivery location and any window or factory sealing requirement.