Brand:

Cortem SA171108 Ex eb Aluminium Junction Box

Description

Cortem SA171108: what the code means

Looking for Cortem SA171108? This is a small rectangular lightweight Ex eb aluminium junction box from the SA and SAG Ex eb aluminium junction box series. It is a 170 x 110 x 83 mm box with 164 x 104 x 65 mm inside, 3 mm walls and a weight of 0.80 kg, belonging to the lighter SA line. The marking printed in the data sheet is II 2GD Ex eb IIC T6/T5/T4 Gb / Ex tb IIIC T75/T110°C Db, IP66, with ATEX CESI 03 ATEX 333 and IECEx CES 13.0001 listed as the certification basis.

As an independent supplier serving Oman and the GCC, Seven Star LLC is not affiliated with the manufacturer. All values on this page are summarised from the data sheet and need a final check against the latest issue.

Construction highlights

  • 3 mm wall lightweight Ex eb body
  • IP66 with silicone lid gasket
  • Cast aluminium feet for M6 screws
  • Stainless earth studs inside and outside
  • Terminals up to 32 x 1.5 mm2

Cortem SA171108 technical specifications

Part number SA171108
Series SA / SAG Ex eb aluminium junction boxes
Outside dimensions A x B x C 170 x 110 x 83 mm
Inside dimensions a x b x c 164 x 104 x 65 mm
Wall thickness S1 / S2 3 mm / 2.5 mm
Fixing X x Y 154 x 94 mm
Fixing hole diameter 6.5 mm
Weight 0.80 kg
Marking II 2GD Ex eb IIC T6/T5/T4 Gb, Ex tb IIIC T75/T110°C Db, IP66
Certificates CESI 03 ATEX 333; IECEx CES 13.0001; INMETRO DNV 15.0119; UL E550165
Impact rating IK10
Rated voltage and current 1000 Vac/dc; 312 A; 1.5 to 300 mm2 terminals
Drilling area, sides A and C 68 x 55 mm: 3 x 3/8″, 2 x 1/2″, 1 x 3/4″, 1 x 1″
Drilling area, sides B and D 128 x 55 mm: 5 x 3/8″, 5 x 1/2″, 3 x 3/4″, 2 x 1″, 2 x 1 1/4″, 2 x 1 1/2″
Max terminals 1.5 mm2: 32; 2.5 mm2: 22; 4 mm2: 19; 6 mm2: 14; 10 mm2: 11; 16 mm2: 9
Body and lid Low copper aluminium alloy; polyester RAL 7035 (Ex e) or RAL 5015 (Ex i)
Screws Stainless steel, captive
Mounting Cast aluminium feet for M6 screws

How SA171108 differs from other SA/SAG variants

The table below shows where SA171108 sits against its siblings in the SA/SAG family. Dimensions, weight, capacity and the numbers of entries all change from one code to the next, so the code you order matters.

  • Wall 3 mm against 7 mm on the SAG111108.
  • Length 170 mm versus 110 mm for the square 111108 size.
  • 32 terminals of 1.5 mm2 compared with 16 for the 111108.
  • Fixing 154 x 94 mm instead of 94 x 94 mm.

Applications: oil and gas, utilities, water, industry

For GCC projects, Cortem SA171108 suits the places where gas or combustible dust can appear: oil and gas wellsites, tank farms, compressor houses, chemical blending halls and the process areas of power and water plants. The longer base gives room for a small terminal row, so it is used as a signal or sensor junction near field instruments or lighting circuits. Sectors named by the manufacturer for the series are oil refineries, chemical and petrochemical plants and offshore platforms.

Specifying SA171108

A short compatibility list for SA171108: (1) the area must be within the marking II 2GD Ex eb IIC T6/T5/T4 Gb / Ex tb IIIC T75/T110°C Db, IP66; (2) site temperatures must stay inside -40°C to +55°C as standard (T6 at +40°C, T5 at +55°C), with extended ranges down to -60°C and up to +85°C depending on terminals; (3) terminals, glands and plugs must be separately certified. Sides B and D offer a wider 128 x 55 mm drilling area than A and C (68 x 55 mm), allowing up to 5 holes of 3/8 inch there. If your requirement falls outside these limits, ask for a variant instead of modifying the box on site.

Installing and servicing SA171108

Commissioning Cortem SA171108 follows the usual Ex routine. Mount it at the stated fixing dimensions, make the earth connection, route the cables through certified entries and close the lid. Fix it at 154 x 94 mm with 6.5 mm holes and drill entries only in the permitted areas; the SA walls take clearance holes only, not tapered threads. Before energising, verify polarity and terminations, confirm gasket seating and note the serial label for the asset register.

Routine care for SA171108 is light: look over the coating and gasket during planned inspections, keep the joint surfaces clean and undamaged, and re-tighten cover screws that have been disturbed. Check that cable glands have a gasket and locknut at each entry, as the thin SA wall relies on them to keep IP66. Never paint the flame or sealing surfaces and never modify the enclosure outside what the certificate allows.

Related products, ordering and FAQ summary

Along with SA171108, customers often need certified cable entries, plugs, mounting accessories and neighbouring box sizes. Please tell us the thread standard, the number of cables and the temperature class your project needs; this avoids a second round of questions.

Spare-part buyers should verify SA171108 against the installed nameplate, because codes in the SA/SAG family are close in appearance but not interchangeable. Check dimensions, fixing centres and certificates, and note that the marking to preserve is II 2GD Ex eb IIC T6/T5/T4 Gb / Ex tb IIIC T75/T110°C Db, IP66.

To sum up, SA171108 is a light rectangular junction box; the FAQs deal with inside size, entry counts, threads, terminal count and the RFQ.

Documents and quotation

The attached PDF is the manufacturer datasheet that this summary is based on. Please send the RFQ with part number SA171108, quantity and delivery location, and tell us if you need a particular thread type or finish.

Installation and Commissioning Planning

Planning ahead shortens downtime when a Cortem SA171108 goes into service. Confirm the available mounting space, cable entry or process connection, and the tools and spare seals needed on the day. Keep the existing configuration or calibration data so the new unit can be set up to match, and check that loop drawings and the asset register are updated after the swap. If the installation has to fit a short shutdown window, tell us the date when you request a quotation so that delivery of the Cortem equipment can be planned around it.

Other Models in the SA/SAG Range

Seven Star LLC supplies models from the SA/SAG range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Cortem SAG302318 Deep Ex eb Heavy-Wall Junction BoxSwitchgear, Enclosures & DistributionView details
Cortem SA171108 Ex eb Aluminium Junction BoxSwitchgear, Enclosures & DistributionYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Cortem SA171108 Ex eb Aluminium Junction Box Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Cortem is the Italian maker of explosion-proof and increased-safety electrical equipment: Ex d and Ex e lighting, enclosures, control stations, plugs and sockets, cable glands and signalling devices. Marco Rossi and Renato Gratton founded the company on 24 February 1968 in Villesse, in the Friuli Venezia Giulia region of north-east Italy. Cortem S.p.A. heads the Cortem Group, which also includes Elfit and the Fondisonzo foundry, and supplies onshore and offshore oil and gas, chemical and industrial plants.

Seven Star LLC is an independent supplier in Muscat. We list Cortem junction boxes, lighting, plugs and sockets and control stations for oil and gas and process projects in Oman and the GCC.

Cortem company profile

Founded 24 February 1968, Villesse (Gorizia), Italy
Founders Marco Rossi and Renato Gratton
Name From the Italian for electromechanical construction and technical representation
Group companies Cortem S.p.A., Elfit and Fondisonzo
Approvals ATEX and IECEx certified explosion-protected equipment
Product families Ex d and Ex e luminaires and LED fittings, emergency and exit lights, obstruction lights, junction and control boxes, control stations, plugs and sockets, cable glands, alarm and signalling devices

Milestones

  • 1968: Marco Rossi and Renato Gratton found Cortem in Villesse on 24 February.
  • 2011: Research and development on LED lighting for hazardous areas begins.
  • 2012: The first Cortem LED fixture series is launched.
  • 2022: The third generation of Cortem LED fixtures is released.

Cortem product series

Enclosures include the EJBX stainless steel Ex d junction boxes, EJBC aluminium Ex d boxes for gas group IIC, the SA and SAG Ex eb aluminium boxes in 18 sizes and the EJBE and EJBXE Ex de control and distribution boards. Control and power connection products include the CMD Ex e fibreglass control stations and the PYN, SPYN and CMBSP07 Ex plugs and sockets from 16 to 125 A.

Lighting covers the SLED-ME and EVL-40 Ex LED floodlights, the Ex nR SLED-MN and EVNL-40 floodlights for zone 2, the LIFEX-M linear fixture, the FLOWEX high bay, the EVML low bay, STREETEX street lighting and the XLFE-LIB and XLFE-MIA obstruction lights for stacks and towers. The GRDE-4200 is an electronic earthing system for road tanker loading bays.

Where Cortem equipment is used

Refineries, gas plants, tank farms and loading terminals, offshore platforms and ships, chemical and pharmaceutical plants and mining. Products are certified to ATEX and IECEx, with other schemes according to model.

Cortem products we list

Family Examples
Automation Accessories CMBSP07 Ex GRP Plugs and Sockets 16 A to 125 A, CMD Ex e Fibreglass Control and Signalling, EJBC Aluminium Ex d Junction Boxes for Gas, EJBE-EJBXE Ex de Control and Distribution, EJBX Stainless Steel Ex d Junction Box IIB+H2, EV Ex d Luminaires for Traditional and LED, EVL-40 Ex LED Floodlight with 40 Degree Beam, EVML Ex LED Low Bay Luminaire and 14 more

Ordering Cortem products: what we need

Send the model code, the zone and gas or dust group, temperature class, ingress protection, the certification scheme required, and for enclosures the size, entries and internal components. For lighting give the wattage, voltage and mounting; for plugs and sockets the current, poles and voltage.

Facts checked against Cortem Group's published company history, October 2026.

FAQ

Questions about the Cortem SA171108 Ex eb Aluminium Junction Box

Answers from our engineering team on installation, compatibility and integration.

01What are the inside dimensions of Cortem SA171108?
164 x 104 x 65 mm, and the outside is 170 x 110 x 83 mm.
02How many entries does Cortem SA171108 allow on its long sides?
The 128 x 55 mm area allows up to 5 holes of 3/8 inch, 5 of 1/2 inch, 3 of 3/4 inch and 2 each of 1 inch, 1 1/4 inch and 1 1/2 inch.
03Can Cortem SA171108 take tapered threads?
No, SA walls are thin; use through holes with locknuts, or choose the SAG version for threaded entries.
04How many terminals fit in Cortem SA171108?
32 of 1.5 mm2, 22 of 2.5 mm2, 19 of 4 mm2 and 9 of 16 mm2 as a rough guide.
05How do I request Cortem SA171108?
Send an RFQ with SA171108, quantity and delivery location.