- Automation & ControlView all 2,895 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Festo
Festo LFR-3/8-D-MIDI Filter regulator
Description
Festo LFR-3/8-D-MIDI overview
The Festo LFR-3/8-D-MIDI (part number 159582) is a filter regulator in the Midi size of the D series, with G3/8 ports. The datasheet describes it as: filter regulator with pressure gauge.
It is rated for an operating pressure of 1 bar to 16 bar and offers a pressure regulation range of 0.5 bar to 12 bar, with a maximum pressure hysteresis of 0.2 bar. The standard nominal flow rate is 3100 l/min, which gives a sense of the size of air consumer that can be fed through the unit.
Key features of Festo LFR-3/8-D-MIDI
- Size Midi, series D, connection G3/8.
- Operating pressure 1 bar to 16 bar; regulation range 0.5 bar to 12 bar.
- Standard nominal flow rate 3100 l/min.
- Weight 920 g.
- Mounting: either Inline installation, With accessories.
- Filtration grade 40 µm with manual, rotating condensate drain; maximum condensate volume 43 cm³.
- Pressure gauge: with pressure gauge.
Technical specifications of LFR-3/8-D-MIDI
The table lists the data published for part number 159582.
| Parameter | Value |
|---|---|
| Part number | 159582 |
| Type designation | LFR-3/8-D-MIDI |
| Size | Midi |
| Series | D |
| Actuator lock | Rotary knob with detent |
| Mounting position | Vertical +/-5° |
| Grade of filtration | 40 µm |
| Condensate drain | Manual, rotating |
| Design | Filter regulator with pressure gauge |
| Max. condensate volume | 43 cm³ |
| Bowl guard | Metal bowl guard |
| Pressure gauge (ANALOG) or Pressure display (DIGITAL) | With pressure gauge |
| Operating pressure | 0.1 MPa…1.6 MPa, 1 bar…16 bar |
| Pressure regulation range | 0.5 bar…12 bar |
| Max. pressure hysteresis | 0.2 bar |
| Standard nominal flow rate (standardised to DIN 1343) | 3100 l/min |
| Operating medium | Compressed air to ISO 8573-1:2010 [-:9:-], Inert gas |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will, always be required) |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Storage temperature | -10 °C…60 °C |
| Air purity class at output | Compressed air to ISO 8573-1:2010 [7:8:4], Inert gas |
| Media temperature | -10 °C…60 °C |
| Ambient temperature | -10 °C…60 °C |
| Product weight | 920 g |
| Type of mounting | Either:, Inline installation, With accessories |
| Pneumatic connection, port 1 | G3/8 |
| Pneumatic connection, port 2 | G3/8 |
| Note on materials | RoHS compliant |
| Material housing | Die-cast zinc |
| Material bowl | Makrolon |
Typical applications in Oman and the GCC
Compressed air preparation units sit at the start of every pneumatic branch. The LFR-3/8-D-MIDI is used on machine inlets, workshop drops, valve islands and instrument air take-offs where a steady, filtered and regulated pressure protects the downstream valves and cylinders. In industrial areas of the GCC, with dust and warm ambient temperatures, a good regulator is among the cheapest ways to extend the life of the pneumatic components behind it.
Typical locations include packaging lines, water and wastewater plants, utility skids, and the auxiliary pneumatic panels at oil and gas facilities. In each case, the unit is selected by size, port and pressure range, and replaced by exact part number so that the panel layout does not need to change.
Selection and compatibility notes for LFR-3/8-D-MIDI
- Choose by flow: the datasheet value is 3100 l/min. Undersized units cause pressure drop during peak demand.
- Choose by port thread: G3/8 on both sides.
- Check the pressure window; the maximum primary pressure is 1 bar to 16 bar.
- Check whether you need a pressure gauge fitted. This version is described as: filter regulator with pressure gauge.
- Confirm the condensate drain type (manual, rotating) suits the maintenance routine.
The D series also has related units with other sizes, other drain types and other gauge options, so the suffix in the type code matters. Send us the full designation or the nameplate photo.
Installation and commissioning
Install the LFR-3/8-D-MIDI in the vertical position within the tolerance shown in the datasheet, following the flow arrow on the body. Support the pipework so that the housing carries no bending loads. Close the pressure setting before pressurising, then raise the output pressure slowly while watching the gauge or test port. Lock the setting knob where this is required.
Maintenance and spare parts
Check the bowl and drain regularly. A full bowl allows condensate to pass downstream. Clean the bowl only with the cleaning agents permitted for the bowl material, and replace worn bowls and guards. Keep a spare LFR-3/8-D-MIDI, part number 159582, if the air supply is critical.
Related products and ordering notes
Pair the LFR-3/8-D-MIDI with solenoid valves and cylinders from our Festo listing. Send the type code, port size and quantity with your RFQ.
Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with Festo. Product names and part numbers are used only to identify the item you ask for.
Festo LFR-3/8-D-MIDI vs Other Festo Filter regulator Variants
The Festo LFR-3/8-D-MIDI is the choice when your application specifically needs LFR-3/8-D-MIDI. Ordering a neighbouring size or rating in this family is the most common cause of returns, so compare the figure on the existing unit or the design data sheet before you send an RFQ.
| Variant | Distinguishing detail |
|---|---|
| Festo LFR-1/2-D-MIDI Filter regulator | LFR-1/2-D-MIDI |
| Festo LFR-3/8-D-MIDI Filter regulator (this page) | LFR-3/8-D-MIDI |
FAQ summary for LFR-3/8-D-MIDI
What is the Festo part number for LFR-3/8-D-MIDI? The part number for the LFR-3/8-D-MIDI is 159582. Please quote both the type code and the part number 159582 in your RFQ so the correct item is identified.
What are the port size and flow rate of LFR-3/8-D-MIDI? The ports are G3/8 and the standard nominal flow rate is 3100 l/min, as stated in the datasheet.
What pressure range does LFR-3/8-D-MIDI regulate? The pressure regulation range is 0.5 bar to 12 bar and the operating pressure is 1 bar to 16 bar.
Does LFR-3/8-D-MIDI include a pressure gauge? The datasheet describes it as: filter regulator with pressure gauge.
What size is LFR-3/8-D-MIDI? It belongs to the Midi size of the D series and weighs 920 g.
Documents and quotation
A datasheet for part number 159582 is available from us on request and is attached to this product page when published. To receive a quotation, send the RFQ with the part number 159582, the type designation LFR-3/8-D-MIDI and the quantity required, together with the delivery location in Oman or the GCC. We will confirm availability and lead time and answer technical questions about fit and function.
Datasheets & Documents
- Datasheet Festo LFR-3/8-D-MIDI Filter regulator Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Festo is a German maker of pneumatic and electric automation technology, founded in 1925 in Esslingen am Neckar by Albert Fezer and Gottlieb Stoll; the name comes from their surnames. It first made woodworking machines and power tools before moving into pneumatics in the 1950s. Festo is family-owned and still headquartered in Esslingen.
Seven Star LLC sources and supplies Festo cylinders, valves and valve terminals for machine maintenance and projects in Oman and the GCC.
Festo company profile
| Founded | 1925, Esslingen am Neckar, Germany |
|---|---|
| Founders | Albert Fezer and Gottlieb Stoll |
| Name | From FEzer and STOll |
| Headquarters | Esslingen am Neckar |
| Ownership | Family-owned |
| Product families | DSBC and ADN pneumatic cylinders, VUVG and VTUG solenoid valves and valve terminals, MS series air preparation units, CPX-AP remote I/O, EMMT servo motors and CMMT servo drives, electric axes and grippers |
Milestones
- 1925: Fezer and Stoll found the company in Esslingen.
- 1950s: Festo begins making pneumatic components.
Festo products listed
Two items show the two halves of a pneumatic circuit. The VTUG is a valve terminal: a manifold that carries a row of directional valves with common air supply and a shared electrical connection. The DSBC-32-100-PPVA-N3 is an ISO standard cylinder. Its type code reads as 32 mm piston diameter and 100 mm stroke, with adjustable end-position cushioning and a piston magnet for position sensing.
Festo products we list
Ordering Festo parts: what we need
Festo parts carry both a type code and a numeric part number on the label. Send both when you can; the part number is the shortest route to an exact match. For a cylinder give the full type code as on the listed DSBC example, plus mounting parts and proximity switches if required. For a VTUG valve terminal send the configuration code or a label photo: number of valve positions, valve functions, coil voltage and the electrical connection type all vary from one terminal to the next.
Facts checked against Festo's corporate history pages, October 2026.
Browse Festo products by category: Solenoid Valve, Valve Actuator.
FAQ
Questions about the Festo LFR-3/8-D-MIDI Filter regulator
Answers from our engineering team on installation, compatibility and integration.
01What is the Festo part number for LFR-3/8-D-MIDI?
The part number for the LFR-3/8-D-MIDI is 159582. Please quote both the type code and the part number 159582 in your RFQ so the correct item is identified.
02What are the port size and flow rate of LFR-3/8-D-MIDI?
The ports are G3/8 and the standard nominal flow rate is 3100 l/min, as stated in the datasheet.
03What pressure range does LFR-3/8-D-MIDI regulate?
The pressure regulation range is 0.5 bar to 12 bar and the operating pressure is 1 bar to 16 bar.
04Does LFR-3/8-D-MIDI include a pressure gauge?
The datasheet describes it as: filter regulator with pressure gauge.
05What size is LFR-3/8-D-MIDI?
It belongs to the Midi size of the D series and weighs 920 g.


















Reviews
There are no reviews yet.