Brand:

Panametrics DigitalFlow XMT868i Liquid Ultrasonic Flow Transmitter

Description

Panametrics XMT868i overview

The Panametrics DigitalFlow XMT868i is a complete ultrasonic flow metering system for liquids. It combines transit-time flow measurement with a low-cost transmitter package that can be installed right at the measurement point, and it carries certification for hazardous (classified) locations typical of petrochemical and chemical plants. The XMT868i measures hydrocarbon liquids, liquefied natural gas, crude oil, lubricating oils, diesel and fuel oils, solvents, water and wastewater, hot and chilled water, chemicals, beverages and other liquids.

The all-digital XMT868i has no moving parts, needs minimal maintenance and gives long-term, drift-free operation. An onboard microprocessor provides digital signal coding and correlation detection, automatic adjustment to changing fluid properties and dynamically configured operating software. A unique infrared six-button keypad lets technicians program and verify the meter through the glass in a hazardous location, with no need to open the case. The PanaFlow wetted meter system uses the XMT868i as its transmitter.

Key features of the XMT868i

  • Nonintrusive clamp-on or wetted transducer measurement on a wide range of pipe sizes and materials.
  • Hazardous (classified) location certification options.
  • Infrared six-button keypad for safe programming and diagnostics.
  • Optional two-channel, two-path version to measure two pipes or average two paths.
  • Energy measurement option and backlit LCD display.
  • Velocity, volumetric and energy flow rates with totalized flow and trend data.
  • Automatic Tracking Window to keep measuring when fluid sound speed changes.
  • RS232 as standard with RS485, HART, Modbus, Foundation Fieldbus, OPC and Ethernet options.

Panametrics DigitalFlow XMT868i technical specifications

Parameter Value
Flow measurement Patented correlation transit-time mode
Fluid types Acoustically conductive fluids, many with entrained solids or gas bubbles
Clamp-on pipe sizes 0.5 in to 300 in (12.7 mm to 7.6 m) and larger
Wetted pipe sizes 1 in to 200 in (25.4 mm to 5 m) and larger
Pipe wall thickness Up to 3 in (76.2 mm)
Accuracy (velocity) Plus or minus 0.5 percent of reading achievable with process calibration
Typical clamp-on accuracy Pipe ID above 6 in: 1 to 2 percent; below 6 in: 2 to 5 percent
Typical wetted accuracy Plus or minus 1 percent of reading
Repeatability Plus or minus 0.1 to 0.3 percent of reading
Range (bidirectional) -40 to 40 ft/s (-12.2 to 12.2 m/s); rangeability 400:1
Power 100-240 VAC plus or minus 10 percent; optional 12 to 28 VDC; 20 W maximum
Standard outputs Two isolated 0/4 to 20 mA outputs, 600 ohm maximum, NAMUR NE043
Enclosure Epoxy-coated aluminum Type 4X/IP66, Class I Division 1 Groups B, C and D; flameproof II 2 GD EEx d IIC T5/T6; stainless option
Operating temperature -40 to 140 deg F (-40 to 60 deg C)
Size and weight 8.2 in x 6.6 in (208 x 168 mm); 10 lb (4.5 kg)
Logging Optional, up to 150,000 flow data points

Clamp-on transducers cover -40 to 150 deg C as standard and -200 to 400 deg C as an option; standard wetted transducers cover -40 to 100 deg C. The transducer set is quoted separately by pipe size and temperature.

Typical applications in Oman and the GCC

The XMT868i fits crude oil and refined product lines, LNG and low-temperature hydrocarbon service, chemical dosing and solvent lines, cooling and chilled water loops, and water or wastewater pipes. In Oman and the GCC this makes it relevant to refinery and terminal transfer lines, utility water systems, desalination plants and district cooling, where clamp-on installation avoids shutdowns and pipe cutting.

Selection and compatibility notes

Decide between clamp-on and wetted transducers, then define pipe material, wall thickness and liquid temperature to select the transducer and mounting. Choose single or two-channel, the I/O cards needed (analog, pulse, RTD and relay) and the digital protocol required by your DCS. If energy flow is needed, specify the RTD or temperature input option. Consult the manufacturer for concrete, composite or heavily lined pipes.

Installation and commissioning

Observe the straight-run assumption of about 10 diameters upstream and 5 downstream for the stated accuracy, and keep flow velocity above 1 ft/s (0.3 m/s). Mount the XMT868i near the pipe, fit transducers using a chain, strap or welded or magnetic fixture for clamp-on use, or install wetted transducers in a flowcell. Wire power, outputs and the transducer cables using the supplied manual, then enter pipe data through the infrared keypad.

Maintenance and service life

There are no moving parts, so routine upkeep is limited to checking cable connections, transducer coupling on clamp-on installations and the diagnostic values on the display. PanaView software over RS232 gives access to diagnostics and logging when deeper checks are needed.

Related products and ordering notes

Related Panametrics flow items include the AT868 water transmitter, the DF868 liquid flowmeter and the PanaFlow HT safety flow meter. For an XMT868i RFQ, list pipe size, material, wall thickness, fluid, temperature, hazardous area class, channel count and I/O options. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer.

Quick answers about the XMT868i

  • What does the XMT868i measure? It measures the flow of acoustically conductive liquids such as hydrocarbons, crude oil, LNG, water, chemicals and solvents using ultrasonic transit time.
  • Can the XMT868i use clamp-on transducers? Yes. It supports clamp-on transducers for pipes from 0.5 in to 300 in and wetted transducers from 1 in to 200 in.
  • Is the XMT868i certified for hazardous areas? The standard enclosure is Class I Division 1 Groups B, C and D and flameproof II 2 GD EEx d IIC T5/T6, according to the datasheet.

Documents and quotation

A manufacturer datasheet for the XMT868i is available from Seven Star LLC on request and is attached to this listing where provided. To receive a quotation, send the RFQ with the part number XMT868i, the quantity required and your delivery location, together with any hazardous area, range or configuration details from your project specification.

Datasheets & Documents
  • PDF Datasheet Panametrics DigitalFlow XMT868i Liquid Ultrasonic Flow Transmitter Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Panametrics is an American maker of ultrasonic flowmeters and moisture, oxygen and gas analysers. It was founded in 1960 and was based in Waltham, Massachusetts, when GE bought it in 2002. It later became a Baker Hughes business, and since 1 January 2026 it has belonged to Crane Company. Its long-running site in Shannon, Ireland, opened in 1973.

Seven Star LLC lists Panametrics flowmeters and analyzers for buyers in Oman: DigitalFlow gas and flare meters, clamp-on and portable liquid meters, and trace moisture analyzers for natural gas and process gases. We are an independent supplier, so each inquiry is checked against the manufacturer's order string before a quotation goes out.

Panametrics company profile

Founded 1960, Massachusetts, USA
Main sites Billerica, Massachusetts, and Shannon, Ireland (since 1973)
Ownership Crane Company since 1 January 2026; previously GE (from 2002) and Baker Hughes
Key technology Transit-time ultrasonic flow measurement and aluminium oxide moisture sensing
Product families TransPort PT900 portable and DigitalFlow fixed ultrasonic flowmeters for liquid, gas and flare gas, aluminium oxide moisture probes and hygrometers, Aurora laser moisture analysers, XMO2 oxygen and XMTC thermal conductivity transmitters

Milestones

  • 1960: Panametrics is founded.
  • 1973: The Shannon, Ireland, site is established.
  • 2002: GE acquires Panametrics.
  • 2026: Crane Company completes its purchase of Baker Hughes' Precision Sensors & Instrumentation, including Panametrics.

Panametrics product families on this page

The listed items follow the manufacturer's own grouping:

  • Gas and flare flow: DigitalFlow GF868 flare gas meter, GM868 and XGM868i gas flow transmitters
  • Liquid flow: XMT1000 transmitter, AT600 AquaTrans clamp-on meter, TransPort PT900 portable meter
  • Moisture: moisture.IQ multichannel analyzer, HygroPro II aluminum oxide transmitter, Aurora TDLAS analyzer for natural gas

Older units may carry GE Panametrics or GE Sensing on the nameplate. They belong to the same product lines, and the model string is read the same way.

Where Panametrics flowmeters and moisture analyzers are used

Flare meters report flared volumes on production sites, refineries and LNG plants. Clamp-on and portable ultrasonic meters check water, hydrocarbon liquid and utility lines without cutting the pipe. Aluminum oxide and TDLAS moisture analyzers watch dehydration units, gas pipelines, hydrogen and industrial gas streams. The manufacturer also names chemical processing, energy and water and wastewater among its markets, which matches what GCC operators ask us for.

Panametrics products we list

Family Examples
Flowmeters AT600 AquaTrans Clamp-On Ultrasonic Wate…, DigitalFlow GM868 General-Purpose Gas Ul…, GF868 DigitalFlow Flare Gas Ultrasonic F…, PT900 TransPort Portable Ultrasonic Flow…, XGM868i DigitalFlow Gas Ultrasonic Flow…, XMT1000 Liquid Flow Ultrasonic Transmitter
Gas Analyzer Systems Aurora TDLAS Moisture Analyzer for Natur…, HygroPro II Aluminum Oxide Moisture Tran…, moisture.IQ Multichannel Trace Moisture…

Ordering Panametrics equipment: what we need

A Panametrics model is a long configuration string, and the transducers or probes are ordered separately. Please send the full model and serial number of the electronics, the transducer or moisture probe part number, pipe size, schedule and material, fluid, pressure and temperature, flow range, hazardous area approval and output or protocol. For a flare meter add the flare gas composition range and velocity range. For moisture, give the dew point range and whether sample system components are required.

Facts checked against GE's 2002 acquisition release, Crane Company's January 2026 completion release and Irish press, October 2026.

FAQ

Questions about the Panametrics DigitalFlow XMT868i Liquid Ultrasonic

Answers from our engineering team on installation, compatibility and integration.

01What does the XMT868i measure?
It measures the flow of acoustically conductive liquids such as hydrocarbons, crude oil, LNG, water, chemicals and solvents using ultrasonic transit time.
02Can the XMT868i use clamp-on transducers?
Yes. It supports clamp-on transducers for pipes from 0.5 in to 300 in and wetted transducers from 1 in to 200 in.
03Is the XMT868i certified for hazardous areas?
The standard enclosure is Class I Division 1 Groups B, C and D and flameproof II 2 GD EEx d IIC T5/T6, according to the datasheet.
04What is the rangeability of the XMT868i?
The overall rangeability is 400:1 over a bidirectional range of -40 to 40 ft/s.
05Does the XMT868i have two channels?
A two-channel, two-path version is optional, used for two pipes or for two-path averaging on one pipe.