Brand:

Servomex S4000987 Internal Fine Filter Cap and O-Ring Kit, SERVOPRO

Description

Servomex S4000987 overview: internal fine filter cap and O-ring kit for the SERVOPRO 4000 series

The Servomex S4000987 is the kit containing the internal fine filter cap and O-ring for the SERVOPRO 4000 series. The manual describes the front panel sample filter as a cap with a rubber O-ring that must seat correctly whenever the element is changed.

The image on this page shows the SERVOPRO 4000 series analyser (MultiExact 4100) that this item belongs to, so that buyers can recognise the equipment family; it is not a close-up of the internal fine filter cap and O-ring kit itself. Every detail on this page is taken from the manufacturer documentation for that equipment, and where a value is not stated there, we have left it out rather than guess.

Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. We list Servomex S4000987 so that maintenance and procurement teams can quote the exact number that appears in the manufacturer manual, which matters because instrument spares are rarely interchangeable by description alone.

Key features of S4000987

  • Exact manufacturer part number S4000987, taken from the documented spares or parts list of the analyser.
  • Item: internal fine filter cap and O-ring kit.
  • Intended equipment: SERVOPRO 4000 series analyser (MultiExact 4100).
  • Order the S4000987 when the cap is damaged, its threads are worn or the O-ring has hardened.
  • Supplied against a quotation request that confirms the analyser model, serial number and quantity.

Technical specifications for S4000987

The first table records the data for the part itself, as given in the manufacturer documentation. The second table records the main data of the host equipment, which helps confirm that the part suits the installation. No pricing is shown on this page, and values not published in the documentation are not included.

Part data

Item Value
Part number S4000987
Description Kit, internal fine filter cap and O-ring
Quantity per kit 1 each
Internal filter material (4100) Polycarbonate

Host equipment data

Item Value
Analyser family SERVOPRO 4000 series (4100, 4200, 4210, 4900 variants covered by the manual)
Operating temperature (4100D) 5 to 40 degrees C
Storage temperature -20 to 60 degrees C
Supply 85 to 132 V or 170 to 264 V a.c., 47 to 62 Hz, 350 VA maximum
Analogue outputs Two isolated 0-20 mA or 4-20 mA as standard
Alarm relays Three volt-free single pole relay contacts as standard
Serial interface Single RS232/RS485 port, 2400 to 19200 baud, ASCII or Modbus
Warm-up time Typically 24 hours from cold start at 20 degrees C

Typical applications in oil and gas, utilities, water and manufacturing

The SERVOPRO 4000 series is a multi-technology rack-style gas analyser family that can combine paramagnetic, zirconia, infra-red and other transducers in one chassis. It is applied in industrial gas production, hydrogen and nitrogen purity checks, combustion and process control and laboratory duties. Across Oman and the GCC it serves air separation and industrial gas plants, petrochemical and fertiliser units, power stations and quality laboratories that rely on a continuous multi-gas reading.

Gulf conditions add their own demands: high ambient temperature, fine desert dust and coastal humidity all age seals, filters and electronics faster than in temperate climates. A planned stock of spares such as S4000987 therefore pays back quickly, because an analyser that is waiting for a part can hold up a start-up, a safety check or an emissions report.

Selection and compatibility notes

Order the S4000987 when the cap is damaged, its threads are worn or the O-ring has hardened. The filter elements themselves are a separate kit, S4000988, so a full refresh needs both part numbers.

The 4000 series installation manual covers several variants, so parts such as filter elements and kits differ by model. Quote the analyser model code and serial number with your request so that the correct filter style (internal polycarbonate, glass fibre, or external 316 stainless steel as listed in the manual) is identified.

When you send an enquiry for S4000987, include the analyser model, the serial number or order code, the supply voltage if relevant, and a photograph of the nameplate. That information lets us confirm the match against the manufacturer documentation before a quotation is issued.

Installation and commissioning of S4000987

The manual procedure is to isolate the sample, use the supplied spanner to unscrew the cap while supporting the filter housing, remove the old element and the rubber O-ring, fit the new element and O-ring, check that the O-ring is seated on the cap and tighten the cap using the spanner.

As with any work on process analysers, follow the site permit-to-work system, isolate sample and electrical supplies, and use only the procedures in the manufacturer manual. After fitting S4000987, return the analyser to service in the order the manual describes and confirm the reading with a suitable reference gas before relying on the output for control or alarms.

Maintenance and service life

Replace front panel sample filter elements every six months as the manual states. Each time, check the O-ring seating, since a poorly seated O-ring lets air into the sample.

Keep a simple maintenance log for each analyser listing the date, the action and the part number used. When S4000987 has been changed, a short note makes it easy to plan the next replacement and gives the manufacturer or an engineer useful history if a fault returns.

Related products and ordering notes

Other items from the same manual that are often ordered with S4000987 include S4100KITA (spares kit for one year of operation), S4100KITB (spares kit for two years of operation), 2377-3848 (stainless steel element for external filter), 2377-3831 (complete stainless steel external filter unit), S4000988 (internal filter elements pack). Each is a separate part number and is quoted separately. Combining them in one enquiry avoids repeated shipments and shortens the shutdown window.

Many of these numbers belong to older analyser generations. If the manufacturer has superseded a part, we will tell you only if the manufacturer documentation names the replacement. Otherwise we will confirm availability and lead time before you commit to an order.

Frequently asked questions

The questions below summarise what buyers most often ask about S4000987.

What is S4000987? S4000987 is the manufacturer part number for the internal fine filter cap and O-ring kit used with the SERVOPRO 4000 series analyser (MultiExact 4100). It is listed in the spares or parts section of the manufacturer manual.

Which equipment does S4000987 fit? It is listed for the SERVOPRO 4000 series analyser (MultiExact 4100). Please confirm the model and serial number with us before ordering, because variants within a family can use different parts.

Can Seven Star LLC supply S4000987 in Oman? Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Send an RFQ with the part number, quantity and delivery location and we will confirm availability.

Is a datasheet or manual available for S4000987? The part is documented in the manufacturer manual for the host equipment, which lists the part number and description. We can point you to the relevant manual section with your quotation.

What details should I send with my RFQ for S4000987? Send the part number S4000987, the quantity, the analyser model and serial number, the supply voltage where relevant, and the delivery location so we can prepare an accurate quotation.

Documents and quotation

The official Servomex SERVOPRO 4000 Series manual (04000005D) is attached to this page as a PDF. Section 6 (Spares, manual page 6.2) lists S4000987 as the kit with the internal fine filter cap and O-ring. Send us the part number S4000987 with the model and serial number of your analyser and we will confirm compatibility and lead time in a written quotation.

Other Models in the Servomex 4000 Range

Seven Star LLC supplies models from the Servomex 4000 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Servomex S4100KITA SERVOPRO 4100 Spares Kit, One YearGas Analyzer SystemsView details
Servomex S4100KITB SERVOPRO 4100 Spares Kit, Two YearsGas Analyzer SystemsView details
Servomex 2377-3848 Stainless Steel External Filter Element forGas Analyzer SystemsView details
Servomex 2377-3831 Stainless Steel External Filter Unit for SERVOPROGas Analyzer SystemsView details
Servomex S4000987 Internal Fine Filter Cap and O-Ring Kit, SERVOPROGas Analyzer SystemsYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Servomex SERVOPRO 4000 Series Manual (official PDF) Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Servomex is a British specialist in gas analysis, founded in 1952 by Richard Steel, John Crockett and Ronald Mudie; the name comes from servomechanism. It first made electronic products, then built its first paramagnetic oxygen analyser in 1961 after work with Charles Munday on a paramagnetic sensor. Servomex is based in Crowborough, East Sussex, and is part of Spectris.

Seven Star LLC lists Servomex process, combustion, emissions and portable gas analyzers, plus accessories, and sources them for refineries, petrochemical plants and industrial gas producers in Oman.

SERVOMEX company profile

Founded 1952, United Kingdom
Founders Richard Steel, John Crockett and Ronald Mudie
Headquarters Jarvis Brook, Crowborough, East Sussex
Ownership Spectris plc, since 1999
Key technologies Paramagnetic oxygen sensing (1961), infrared analysis (1969), zirconia oxygen sensors (1981)
Product families MultiExact and SERVOPRO MultiExact analysers, SERVOTOUGH OxyExact and Oxy 1800 oxygen analysers, SERVOTOUGH Laser 3 Plus TDL analysers, SERVOFLEX portable analysers, zirconia combustion analysers

Milestones

  • 1952: Servomex is founded.
  • 1961: The first Servomex paramagnetic oxygen analyser is introduced.
  • 1981: Servomex introduces zirconia oxygen sensors.
  • 1999: Spectris acquires Servomex.

Servomex analyzer families listed

Servomex groups its analyzers under family names that indicate where they can be used. SERVOTOUGH covers analyzers built for hazardous areas and field mounting, SERVOPRO covers units for general purpose areas and analyzer houses, and SERVOFLEX is the portable line. On this page:

  • SERVOTOUGH OxyExact 2200: paramagnetic oxygen analyzer for process control and safety
  • SERVOTOUGH SpectraExact 2500: photometric analyzer for process gas components
  • SERVOTOUGH Laser 3 Plus: compact tunable diode laser analyzer for combustion
  • SERVOPRO 4900 Multigas: multi-component analyzer for emissions monitoring
  • SERVOPRO NanoTrace DF-550E: ultra-trace oxygen analyzer for high purity gases
  • SERVOFLEX Micro i.s. 5100: intrinsically safe portable oxygen analyzer

A flow alarm relay box for the 2700 flue gas analyzer is also listed.

Where Servomex gas analyzers are used

Typical duties are oxygen measurement for inerting and blanketing, vapor recovery and flare header safety, combustion control on fired heaters and reformers, purity control in air separation and electronic gases, and continuous emissions monitoring. In the GCC the main users are refining, petrochemicals, fertilizer, LNG and industrial gas plants.

SERVOMEX products we list

Family Examples
Gas Analyzer Systems SERVOPRO 4900 Multigas Analyzer, SERVOPRO NanoTrace DF-550E Ultra-Trace O…, SERVOTOUGH Laser 3 Plus Combustion TDL G…, SERVOTOUGH OxyExact 2200 Oxygen Analyzer, ServoTough SpectraExact 2500 Gas Analyzer
Portable Test & Measurement Micro i.s. 5100 Portable Oxygen Analyzer
Gas Analyzer Accessories Tough Flue Gas 2700 Flow Alarm Relay Box

Ordering Servomex analyzers and spares: what we need

A Servomex gas analyzer is built to an order code that fixes the measured gas, range, sample wetted materials, outputs and hazardous area approval. For replacements and spare parts, send the model, the serial number and the order code from the data plate. For a new Servomex oxygen analyzer or multigas unit, send the full stream composition, the component and range to be measured, sample pressure and temperature, the area classification, power supply and communication needs. We check the configuration against Servomex documentation before quoting.

Facts checked against Servomex's own 70-year history and company profiles, October 2026.

FAQ

Questions about the Servomex S4000987 Internal Fine Filter Cap and

Answers from our engineering team on installation, compatibility and integration.

01What is S4000987?
S4000987 is the manufacturer part number for the internal fine filter cap and O-ring kit used with the SERVOPRO 4000 series analyser (MultiExact 4100). It is listed in the spares or parts section of the manufacturer manual.
02Which equipment does S4000987 fit?
It is listed for the SERVOPRO 4000 series analyser (MultiExact 4100). Please confirm the model and serial number with us before ordering, because variants within a family can use different parts.
03Can Seven Star LLC supply S4000987 in Oman?
Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer. Send an RFQ with the part number, quantity and delivery location and we will confirm availability.
04Is a datasheet or manual available for S4000987?
The part is documented in the manufacturer manual for the host equipment, which lists the part number and description. We can point you to the relevant manual section with your quotation.
05What details should I send with my RFQ for S4000987?
Send the part number S4000987, the quantity, the analyser model and serial number, the supply voltage where relevant, and the delivery location so we can prepare an accurate quotation.