APC SYRIM3 Symmetra RM 2-6kVA and 8-12kVA Redundant

Role of the SYRIM3

APC SYRIM3 belongs to the Symmetra Accessories group and is described by APC as Symmetra RM 2-6kVA and 8-12kVA Redundant Intelligence Module.

Its recorded product type is communication module.

It belongs to the Symmetra Accessories range and is classified as communication module.

Technical specifications

Selection notes

Check the exact compatible UPS model and the installation sheet before ordering, because accessory kits, cables and options are specific to a given system or range.

Physical data and environment

Dimensions are 41 mm x 168 mm x 499 mm (H x W x D), and the unit weighs 2.28 kg.

Listed operating limits: operating temperature 0…40 °C; relative humidity 0…95 %; operating altitude 0…10000 ft.

Warranty recorded by APC (months): 12.

The mounting mode is listed as rack-mounted. The unit measures 41 mm x 168 mm x 499 mm (H x W x D) and weighs 2.28 kg, so check the available space and the floor or rack loading before delivery. Rack installation should be checked against the rack depth, rail kit and the clearance needed behind the unit for cables and airflow.

The warranty period recorded in the product data is 12 months. If a project requires certificates or test reports, include that request with the quotation request.

Where the SYRIM3 fits in an APC Symmetra RM installation

Symmetra RM is the rack-mount modular single-phase UPS that preceded Symmetra LX. Power modules and battery modules are hot-swappable, so the system can run with N+1 redundancy and be serviced without shutting down the protected rack.

Communication and management modules connect the UPS to the people and systems that look after it. A network management card adds a web interface, SNMP, e-mail alerts and event logs, and can work with PowerChute Network Shutdown to close down servers and virtual machines in an orderly way before the battery is exhausted. Dry-contact and I/O modules pass UPS alarms to a building management system or a PLC.

Site conditions in Oman and the GCC for the SYRIM3

The listed operating temperature tops out at 40 °C. Summer shade temperatures in Muscat, Sohar and the interior regularly pass 45 °C, so the equipment belongs in an air-conditioned room or cabinet rather than an open plant area. Fine dust inland and humid, salty air on the coast are hard on electronics, so a sealed room, clean filters and periodic inspection of fans and terminals are part of a reliable installation.

Service life and maintenance of the APC SYRIM3

Reliability over the years depends mostly on the environment and on routine checks. Keep the room cool and dust-free, inspect fans, filters and connections during planned visits, and review the event log for warnings. On UPS and battery systems, measure runtime under the real load from time to time and replace batteries as a complete set before the runtime falls below what the site needs.

Seven Star LLC supplies APC equipment as an independent supplier based in Muscat. Original product documents are provided where available, and the part number SYRIM3 can be quoted together with related batteries, accessories and spares in one enquiry.

Storage, handling and delivery of the APC SYRIM3

Electronic assemblies and accessories should be stored in their original packaging in a dry, temperature-controlled area until installation, away from dust and condensation. Check the packaging and the part number label on arrival, keep the documents supplied with the item, and record the installation date so that future service intervals and warranty questions can be answered quickly. Seven Star LLC arranges delivery to project sites, warehouses and offices across Oman, and shipment to other GCC countries on request.

Checking compatibility before ordering the APC SYRIM3

APC part numbers are specific: two items that look alike can differ in voltage, connector, firmware support or the frame they fit. Before ordering, compare the model and serial number of the existing equipment with the compatibility information in the datasheet, and note the product generation, because accessories for older ranges such as Smart-UPS RT or Symmetra RM are not always interchangeable with current models. When an item is being replaced, a photo of the rating label and of the existing part is often the fastest way to confirm a like-for-like match. If an exact part is no longer produced, the manufacturer usually lists a successor, which can be checked against the installation before an order is placed.

What to send with an enquiry for the SYRIM3

To confirm the right item and quote quickly, send the following with the part number:

• The UPS model and serial number the item will be used with
• The quantity needed, including any spares to keep on site
• Rack, room or panel details where the item will be installed
• Any documents or certificates required for the project
• The delivery location in Oman (for example Muscat, Sohar, Duqm or Salalah) or elsewhere in the GCC, and the required date

Browse the full APC catalogue or other Schneider Electric products supplied by Seven Star LLC.

Documents and quotation

The official product datasheet for the SYRIM3 is linked under Documents on this page, so ratings, dimensions and compatibility can be checked before ordering. Further manufacturer documents can be requested through the RFQ form.

The single-unit shipping package is listed as 18.4 cm (height) x 57.8 cm (width) x 31.8 cm (length) with a packed weight of 3.18 kg. Use these values when planning freight, lifting and receiving space.

To order, submit the part number SYRIM3, the quantity and the delivery location. Related items are grouped under UPS and Batteries. Seven Star LLC is an independent supplier based in Muscat and answers with availability and a quotation.