Brand:

Cortem EJBC-5B Wide Ex db IIC Junction Box 271 mm

Description

Cortem EJBC-5B at a glance

EJBC-5B is the Cortem code for a flameproof Ex db IIC aluminium junction box in the large footprint with reduced depth, taken from the EJBC aluminium Ex d IIC junction box series. The 5B keeps the 632 x 432 mm outside footprint of the EJBC-5 but is only 271 mm deep outside (205 mm inside) and weighs 43.4 kg. The sheet gives the marking II 2GD Ex db IIC Gb / Ex tb IIIC Db, IP66/67 and cites ATEX EPT 20 ATEX 4074 U and IECEx EUT 20.0023U for the empty enclosure.

As an independent supplier serving Oman and the GCC, Seven Star LLC is not affiliated with the manufacturer. All values on this page are summarised from the data sheet and need a final check against the latest issue.

Construction highlights

  • Wide 632 x 432 mm footprint with only 271 mm overall depth
  • Multi-step joint rated for gas group IIC
  • Stainless steel hinges, handle and bolts
  • Body drilling area 320 x 160 mm on A and C, 520 x 160 mm on B and D
  • Maximum 24 holes of 1/2 inch on short sides and 40 on long sides

Cortem EJBC-5B ratings and dimensions

Part number EJBC-5B
Series EJBC aluminium Ex d IIC junction boxes
Outside dimensions A x B x C 632 x 432 x 271 mm
Internal dimensions L x M x I 560 x 360 x 205 mm
Mounting d / e / f 350 mm / 550 mm / M10
Mounting with brackets D / E / F 550 mm / 430 mm / 11 mm
Weight 43.4 kg
Marking (empty enclosure) II 2GD Ex db IIC Gb, Ex tb IIIC Db
Certificates EPT 20 ATEX 4074 U; IECEx EUT 20.0023U
Ingress protection IP66/67 (IP66 with Cortem M-0 control and signalling devices)
Ambient range, empty box -60°C to +150°C without operators, accessories and windows
Body drilling area, sides A and C 320 x 160 mm
Body drilling area, sides B and D 520 x 160 mm
Max standard terminals, 2.5 mm2 / 10 mm2 / 35 mm2 3×80 / 3×50 / 2×28
Max dissipation T6 / T5 / T4 at +40°C (+55°C) 170 W (130 W) / 250 W (190 W) / 480 W (360 W)
Body and lid Low copper aluminium alloy, RAL 7035 polyester coating
Hinges and bolts Stainless steel
Gasket Silicone between body and lid
Max holes per side A/C, 1/2 inch 24
Max holes per side B/D, 1/2 inch 40

How EJBC-5B differs from other EJBC variants

Compared with the other EJBC variants, the differences that matter for EJBC-5B are these.

  • Depth 271 mm outside and 205 mm inside, 70 mm shallower than EJBC-5.
  • Mass 43.4 kg, 7.6 kg lighter than EJBC-5.
  • T6 dissipation 170 W (130 W at +55°C), compared with 210 W for the deeper box.
  • Long-side drilling area 520 x 160 mm, with 40 holes of 1/2 inch against 50 on EJBC-5.

Use cases across the Gulf

A Cortem EJBC-5B installation typically supports an Omani or Gulf plant that needs hazardous-area wiring points: upstream, midstream and downstream oil and gas, fuel depots, utilities, and industrial production halls. This shape fits wide, shallow panel positions such as wall-mounted control boards in offshore modules or pump-house walls, where depth is limited but width is available. The family literature highlights refineries, chemical plants, onshore and offshore sites and fuel depots as typical settings.

Compatibility and selection

When choosing Cortem EJBC-5B, match the marking II 2GD Ex db IIC Gb / Ex tb IIIC Db, IP66/67 to the hazardous area drawing, test the quoted ambient range (-60°C to +150°C for the empty box without operators, accessories or windows (-60°C to +60°C for all other versions)) against the hottest and coldest day on site, and check the internal volume against the wiring plan. Keep to the sheet’s T6 limit of 170 W at +40°C (130 W at +55°C) when sizing the equipment mounted in the 205 mm of usable depth. Anything fitted to the enclosure, from glands to terminals, needs its own matching certification.

Mounting, start-up and service

Commissioning Cortem EJBC-5B follows the usual Ex routine. Mount it at the stated fixing dimensions, make the earth connection, route the cables through certified entries and close the lid. Mount on the 550 x 430 mm bracket pattern with 11 mm holes; at 43.4 kg a second person is advisable when fitting the lid. Before energising, verify polarity and terminations, confirm gasket seating and note the serial label for the asset register.

To maintain Cortem EJBC-5B, schedule a visual check of the finish, the lid gasket and the fasteners, retighten what has loosened, and clear dust from cable entries. Inspect the stainless hinges and silicone gasket at each turnaround; with a wide lid, uneven closing can leave the gasket unevenly compressed. If a lid or body is damaged around the joint, replace the enclosure instead of repairing the machined surfaces.

Accessories, ordering and FAQ recap

Companion parts for Cortem EJBC-5B include Ex certified glands, closing plugs, earth accessories and, where the data sheet allows, windows or breather and drain valves. State the accessories and entry layout in your RFQ so the quotation covers the complete assembly.

Spare-part buyers should verify EJBC-5B against the installed nameplate, because codes in the EJBC family are close in appearance but not interchangeable. Check dimensions, fixing centres and certificates, and note that the marking to preserve is II 2GD Ex db IIC Gb / Ex tb IIIC Db, IP66/67.

In summary, EJBC-5B trades depth for weight while keeping the big footprint; the FAQs above address its difference from EJBC-5, thermal limits, entries, terminals and ordering.

Documents and quotation

You will find the EJBC datasheet attached as a PDF. When you are ready, send the RFQ quoting Cortem EJBC-5B, the number of pieces and where the goods must go, and mention any requirement for documentation or special options.

What to Include in Your Cortem EJBC-5B Enquiry

An accurate quotation for the Cortem EJBC-5B depends on a few details. Please share the complete part number, any suffix codes for options or approvals, the operating conditions at the installation point, and whether certificates of conformity or test reports must ship with the goods. It also helps to know whether the unit is for planned maintenance, a shutdown or an urgent breakdown, because that decides how it is sourced and shipped. With this information our team can check compatibility with your existing switchgear, enclosures & distribution and reply with availability and a realistic delivery estimate.

Other Models in the EJBC Range

Seven Star LLC supplies models from the EJBC range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Cortem EJBC-5 Large Ex db IIC Junction BoxSwitchgear, Enclosures & DistributionView details
Cortem EJBC-5B Wide Ex db IIC Junction Box 271 mmSwitchgear, Enclosures & DistributionYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Cortem EJBC-5B Wide Ex db IIC Junction Box 271 mm Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Cortem is the Italian maker of explosion-proof and increased-safety electrical equipment: Ex d and Ex e lighting, enclosures, control stations, plugs and sockets, cable glands and signalling devices. Marco Rossi and Renato Gratton founded the company on 24 February 1968 in Villesse, in the Friuli Venezia Giulia region of north-east Italy. Cortem S.p.A. heads the Cortem Group, which also includes Elfit and the Fondisonzo foundry, and supplies onshore and offshore oil and gas, chemical and industrial plants.

Seven Star LLC is an independent supplier in Muscat. We list Cortem junction boxes, lighting, plugs and sockets and control stations for oil and gas and process projects in Oman and the GCC.

Cortem company profile

Founded 24 February 1968, Villesse (Gorizia), Italy
Founders Marco Rossi and Renato Gratton
Name From the Italian for electromechanical construction and technical representation
Group companies Cortem S.p.A., Elfit and Fondisonzo
Approvals ATEX and IECEx certified explosion-protected equipment
Product families Ex d and Ex e luminaires and LED fittings, emergency and exit lights, obstruction lights, junction and control boxes, control stations, plugs and sockets, cable glands, alarm and signalling devices

Milestones

  • 1968: Marco Rossi and Renato Gratton found Cortem in Villesse on 24 February.
  • 2011: Research and development on LED lighting for hazardous areas begins.
  • 2012: The first Cortem LED fixture series is launched.
  • 2022: The third generation of Cortem LED fixtures is released.

Cortem product series

Enclosures include the EJBX stainless steel Ex d junction boxes, EJBC aluminium Ex d boxes for gas group IIC, the SA and SAG Ex eb aluminium boxes in 18 sizes and the EJBE and EJBXE Ex de control and distribution boards. Control and power connection products include the CMD Ex e fibreglass control stations and the PYN, SPYN and CMBSP07 Ex plugs and sockets from 16 to 125 A.

Lighting covers the SLED-ME and EVL-40 Ex LED floodlights, the Ex nR SLED-MN and EVNL-40 floodlights for zone 2, the LIFEX-M linear fixture, the FLOWEX high bay, the EVML low bay, STREETEX street lighting and the XLFE-LIB and XLFE-MIA obstruction lights for stacks and towers. The GRDE-4200 is an electronic earthing system for road tanker loading bays.

Where Cortem equipment is used

Refineries, gas plants, tank farms and loading terminals, offshore platforms and ships, chemical and pharmaceutical plants and mining. Products are certified to ATEX and IECEx, with other schemes according to model.

Cortem products we list

Family Examples
Automation Accessories CMBSP07 Ex GRP Plugs and Sockets 16 A to 125 A, CMD Ex e Fibreglass Control and Signalling, EJBC Aluminium Ex d Junction Boxes for Gas, EJBE-EJBXE Ex de Control and Distribution, EJBX Stainless Steel Ex d Junction Box IIB+H2, EV Ex d Luminaires for Traditional and LED, EVL-40 Ex LED Floodlight with 40 Degree Beam, EVML Ex LED Low Bay Luminaire and 14 more

Ordering Cortem products: what we need

Send the model code, the zone and gas or dust group, temperature class, ingress protection, the certification scheme required, and for enclosures the size, entries and internal components. For lighting give the wattage, voltage and mounting; for plugs and sockets the current, poles and voltage.

Facts checked against Cortem Group's published company history, October 2026.

FAQ

Questions about the Cortem EJBC-5B Wide Ex db IIC Junction Box 271 mm

Answers from our engineering team on installation, compatibility and integration.

01What is the difference between Cortem EJBC-5B and EJBC-5?
The 5B is 70 mm shallower (271 mm outside, 205 mm inside) and 7.6 kg lighter at 43.4 kg, with the same footprint.
02What temperature class limits apply to Cortem EJBC-5B?
At +40°C the sheet allows 170 W for T6, 250 W for T5 without indicators and 480 W for T4; at +55°C 130 W, 190 W and 360 W.
03How many cable holes can Cortem EJBC-5B take on its long sides?
The 520 x 160 mm area allows up to 40 holes of 1/2 inch, 27 of 3/4 inch and 24 of 1 inch.
04How many terminals fit in Cortem EJBC-5B?
The sheet gives up to 3x80 terminals of 2.5 mm2, 3x50 of 10 mm2 and 22 of 70 mm2 for standard Cabur terminals.
05Which documents do I need to request Cortem EJBC-5B?
Send the RFQ with EJBC-5B, quantity and delivery location; the manufacturer datasheet is attached to this page for reference.