- Automation & ControlView all 2,779 products
- Automation Accessories
- AC Drives
- PLC & I/O Cards
- Industrial Communications
- Vibration Monitoring
- Controllers & Data Acquisition
- Isolator & Barrier
- Safety Switches & Guard Locking
- Motor Soft Starters
- CCTV & Security
- Encoders
- Pneumatic Cylinders
- HMI Displays
- Servo Drives
- Industrial Computers
- Machine Vision
- Automation Software
- Robotics
Brand: Weidmüller
Weidmuller 8951390000 CP M SNT3 120W 24V 5A Power Supply
Description
Weidmuller Weidmüller 8951390000 CP M SNT3 120W 24V 5A overview
Weidmuller Weidmüller 8951390000 is the order number of the CP M SNT3 120W 24V 5A, catalogued as: Power supply, switch-mode power supply unit, 24 V. This page summarises what the manufacturer data sheet states for Weidmüller 8951390000, so that engineers and buyers in Oman and the GCC can check the main parameters before sending a request for quotation. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer, so every figure below is taken from the published data sheet and should be confirmed against the current document for your project.
The PRO-M family (Power, Reliable, Optimized) is described by the maker as a dependable 24 V DC supply for automation technology. A solid but slim metal housing allows installation without side gaps on the mounting rail, a wide AC and DC input range and a wide temperature range allow use almost anywhere, and high efficiency, overload resistance and power reserves are highlighted. The literature adds that three-phase members keep working in two-phase mode if one phase fails.
Catalogue status matters for this item. The manufacturer data sheet for 8951390000 carries the delivery status note: This article will no longer be available in the future. It gives 2022-03-30 as the availability date. The same sheet names PRO MAX3 120W 24V 5A as the alternative product. Because of this status, buyers maintaining an installed plant often search for the exact number to repair or extend an existing panel without redesigning it. If stock for the exact number is the priority, state that clearly in your RFQ so that we can confirm what can be sourced.
Key features of 8951390000
The data sheet for 8951390000 lists the following headline characteristics for the CP M SNT3 120W 24V 5A.
- Nominal output of 120 W at 24 V DC ± 1 %.
- Input range 3 x 320…3 x 575 V AC / 2 x 360…2 x 575 V AC.
- Efficiency stated as 89 % @ 3 x 500 V AC / 90 % @ 3 x 400 V AC.
- Protection degree IP20 with housing: Metal, corrosion resistant.
- Parallel connection option: yes, max. 5.
- Width 40 mm, depth 125 mm, height 130 mm.
- Short-circuit, overload and over-temperature protection are listed as: short-circuit, overload, over-heating.
Technical specifications for 8951390000
The table collects the values printed in the manufacturer data sheet. Values that are not printed there are intentionally left out rather than estimated. The GTIN printed for 8951390000 is 4032248742608.
| Parameter | Value |
|---|---|
| Order No. | 8951390000 |
| Type | CP M SNT3 120W 24V 5A |
| Version | Power supply, switch-mode power supply unit, 24 V |
| GTIN (EAN) | 4032248742608 |
| Catalogue delivery status | This article will no longer be available in the future. |
| Available until | 2022-03-30 |
| Alternative product named by the maker | PRO MAX3 120W 24V 5A |
| Output power | 120 W |
| Rated output voltage | 24 V DC ± 1 % |
| Output voltage, min. | 22.5 V |
| Output voltage, max. | 29.5 V |
| Nominal output current for Unom | 5 A @ 60 °C °C, 3,8 A @ 70 °C |
| Rated input voltage | 3 x 400…3 x 500 V AC (wide-range input) |
| AC input voltage range | 3 x 320…3 x 575 V AC / 2 x 360…2 x 575 V AC |
| DC input voltage range | 450…800 V DC (max. 500 V DC acc. to UL508) |
| Frequency range AC | 47…63 Hz |
| Inrush current | max. 50 A |
| AC current consumption | 0.28 A @ 3 x 500 V AC / 0.3 A @ 3 x 400 V AC |
| Degree of efficiency | 89 % @ 3 x 500 V AC / 90 % @ 3 x 400 V AC |
| Power factor (approx.) | > 0.55 @ 3 x 500 V AC / > 0.65 @ 3 x 400 V AC |
| AC failure bridging time @ Inom | > 50 ms @ 3 x 500 V AC / > 20 ms @ 3 x 400 V AC |
| Parallel connection option | yes, max. 5 |
| Overload protection | Yes |
| Short-circuit protection | Yes |
| Protection against over-heating | Yes |
| Residual ripple, breaking spikes | < 50 mVPP @ 24 V DC, IN |
| Connection system | Screw connection |
| Protection degree | IP20 |
| Protection class | I, with PE connection |
| Housing version | Metal, corrosion resistant |
| Width | 40 mm |
| Height | 130 mm |
| Depth | 125 mm |
| Net weight | 814 g |
| Storage temperature | -40 °C…85 °C |
| Tightening torque, max. | 0.6 Nm |
| Certificate No. (cURus) | E255651 |
| Certificate no. (cULus) | E258476 |
Input and output figures should be read together with the derating information in the data sheet. For 8951390000 the nominal output is 120 W at 24 V DC ± 1 %, and the output current is given as 5 A @ 60 °C °C, 3,8 A @ 70 °C. A panel designer normally compares the continuous load of all connected devices, adds the inrush of any capacitive or motor-driven loads, and leaves headroom so that the supply does not operate at the limit of its rating at the highest cabinet temperature. The data sheet contains a derating curve, and that curve rather than the nominal value should be used when the cabinet is hot, as is common in Gulf summer conditions.
Typical applications of 8951390000 in Oman and the GCC
A DIN rail supply such as 8951390000 is used wherever 24 V DC or another low-voltage rail is needed for controllers, I/O, instruments and communication hardware. In oil and gas facilities it powers remote terminal units, marshalling cabinets and analyser shelters. In utilities and water treatment it feeds PLC panels at pumping stations, desalination skids and substations. In manufacturing it supplies machine control cabinets, conveyor drives interfaces and packaging lines. Operators of ageing plants in Oman also look for the exact order number when a failed unit has to be replaced during a short shutdown window.
Selection and compatibility notes for 8951390000
When selecting 8951390000, confirm the supply network first: the rated input voltage is stated as 3 x 400…3 x 500 V AC (wide-range input) and the AC range as 3 x 320…3 x 575 V AC / 2 x 360…2 x 575 V AC. Check the available space against the dimensions of 40 mm width, 130 mm height and 125 mm depth, and confirm that the connection system (Screw connection) fits your wiring standard. If your plan includes redundancy, check the parallel connection entry and use external diode or redundancy modules as recommended in the maker literature. Where the data sheet lists an alternative product for 8951390000, compare terminals, width and output rating before treating it as a drop-in replacement, because mounting depth and wiring may differ between generations.
Installation and commissioning of 8951390000
Mount 8951390000 on a TS 35 rail in the orientation given in the data sheet and keep the ventilation clearances recommended by the maker so that the housing can dissipate its power loss. Connect the protective earth first, use conductors within the cross-section range printed in the data sheet, and tighten the terminals to the stated torque. Protect the input with the recommended back-up fuse or breaker, set the output voltage with the adjustment potentiometer if the data sheet provides one, and check the status LED and any signalling contact before loading the supply. Measure the output under load after commissioning and record the value for later maintenance comparison.
Maintenance and spare part planning for 8951390000
For long service life keep dust and conductive deposits away from the vents and terminals, re-tighten terminals during planned shutdowns, and compare output or switching behaviour with the commissioning record. Because 8951390000 may be requested as a spare for a running installation, keeping one unit in a clean, dry store with its paperwork can shorten outage time. Record the order number 8951390000 and the type CP M SNT3 120W 24V 5A on the panel drawing so that the right item is requested when it must be replaced.
Related products and ordering notes for 8951390000
Other members of the same product family differ in output rating, width, input system and approvals, so the order number is the only safe way to identify the exact item. Quote 8951390000 together with the type CP M SNT3 120W 24V 5A when you contact us. We can also help with related rail accessories, end brackets, redundancy or buffer modules and neighbouring ratings when you are reviewing a whole panel. Lead time and availability are confirmed per request, and no price is shown on this page.
Frequently asked points about 8951390000
- What is 8951390000? It is the order number of the CP M SNT3 120W 24V 5A.
- Which family does it belong to? The PRO-M family (Power, Reliable, Optimized) is described by the maker as a dependable 24 V DC supply for automation technology.
- Where are the dimensions? Width 40 mm, height 130 mm, depth 125 mm as printed in the data sheet.
- How do I order? Send the RFQ with the part number 8951390000 and the required quantity.
Documents and quotation
The manufacturer data sheet for 8951390000 contains the full parameter list, approvals, derating information and accessory suggestions, and we can supply a copy of the data sheet with the quotation. To request a quotation, send your RFQ with the part number 8951390000, the type CP M SNT3 120W 24V 5A and the quantity you need, plus your delivery location in Oman or the GCC. Please state if you need the exact catalogue number only or if an alternative is acceptable.
Other Models in the Pm Range
Seven Star LLC supplies models from the Pm range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.
| Model | Category | |
|---|---|---|
| Weidmuller 8951360000 CP M SNT 250W 24V 10A Power Supply | Power Modules | View details |
| Weidmuller 8951370000 CP M SNT 500W 24V 20A Power Supply | Power Modules | View details |
| Weidmuller 8951380000 CP M SNT 1000W 24V 40A Power Supply | Power Modules | View details |
| Weidmuller 8951390000 CP M SNT3 120W 24V 5A Power Supply | Power Modules | You are viewing this model |
Datasheets & Documents
- Datasheet CP M SNT3 120W 24V 5A Datasheet Download
Reviews (0)
How would you rate this product? Cancel reply
About brand
Weidmüller is a German family-owned maker of electrical connection and industrial electronics products, headquartered in Detmold. The company dates from 1850 and was re-established in Detmold in 1948; it specialised in terminal blocks from the 1940s onward. Weidmüller makes Klippon terminal blocks, power supplies, remote I/O and enclosures, and reported over one billion euros in revenue in 2023.
Seven Star LLC lists Weidmüller PRO MAX power supplies and SAK terminal blocks, and supplies Weidmüller components to panel shops and plants in Oman and the GCC.
Weidmüller company profile
| Founded | 1850, Germany |
|---|---|
| Headquarters | Detmold, Germany (since 1948) |
| Ownership | Family-owned |
| Revenue | Over €1 billion (2023) |
| Product families | Klippon Connect terminal blocks, PRO MAX and PRO TOP power supplies, u-remote I/O and fieldbus couplers, Klippon enclosures, connectors and tools |
Milestones
- 1850: Weidmüller is founded.
- 1948: The company is re-established in Detmold.
Weidmüller products listed here
The listed power supplies are DIN rail switch-mode units with 24 V DC output: a PRO MAX single-phase unit rated 180 W and 7.5 A (85 to 277 V AC input), and a PRO MAX3 three-phase unit rated 240 W and 10 A (320 to 575 V AC input). The SAK series is the screw clamp feed-through terminal block family found in many existing panels. Weidmüller now flags several SAK types as being phased out and names a replacement for some of them.
Weidmüller products we list
Ordering Weidmüller parts: what we need
Weidmüller identifies every item by a ten-digit order number, and that number is the surest way to quote. Without it, send the type printed on the part. For power supplies add input voltage and phases, output voltage and current. For terminal blocks add the conductor cross-section, color, and the end plates, cross-connections and markers you need, since accessories are specific to each series.
Facts checked against Weidmüller milestone lists and distributor profiles, October 2026.
Browse Weidmüller products by category: Electrical & Power Modules.
FAQ
Questions about the Weidmuller 8951390000 CP M SNT3 120W 24V 5A Power
Answers from our engineering team on installation, compatibility and integration.
01What is Weidmuller 8951390000?
8951390000 is the order number of the CP M SNT3 120W 24V 5A, catalogued by the manufacturer as: Power supply, switch-mode power supply unit, 24 V.
02What are the main ratings of 8951390000?
The data sheet lists 120 W at 24 V DC ± 1 % with input 3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC.
03What are the dimensions of 8951390000?
The data sheet gives width 40 mm, height 130 mm and depth 125 mm, mounted on a TS 35 rail.
04Is 8951390000 still available from the manufacturer?
The data sheet shows the status: This article will no longer be available in the future. Available until 2022-03-30. Named alternative: PRO MAX3 120W 24V 5A.
05How do I request a quote for 8951390000?
Send an RFQ to Seven Star LLC with the part number 8951390000 and the quantity. We are an independent supplier and not affiliated with the manufacturer.


















Reviews
There are no reviews yet.