Brand:

Weidmuller 1469520000 PRO ECO 960W 24V 40A Power Supply

Description

Weidmuller Weidmüller 1469520000 PRO ECO 960W 24V 40A overview

Weidmuller Weidmüller 1469520000 is the order number of the PRO ECO 960W 24V 40A, catalogued as: Power supply, switch-mode power supply unit, 24 V. This page summarises what the manufacturer data sheet states for Weidmüller 1469520000, so that engineers and buyers in Oman and the GCC can check the main parameters before sending a request for quotation. Seven Star LLC is an independent supplier serving Oman and the GCC and is not affiliated with the manufacturer, so every figure below is taken from the published data sheet and should be confirmed against the current document for your project.

The PROeco 2nd generation range is described in the maker’s literature as a twelve-part series of switch-mode supplies built to keep automation plants available, with standard functions, solid efficiency and a three-colour status LED that simplifies service work. The range works with DC UPS units, electronic load monitoring and diode modules, so it can be used to build a power management concept, and its compact housing suits flat cabinets installed in the field.

Catalogue status matters for this item. The manufacturer data sheet for 1469520000 carries the delivery status note: This article will no longer be available in the future. It gives 2026-12-30 as the availability date. The same sheet names PRO ECO 960W 24V 40A II as the alternative product. Because of this status, buyers maintaining an installed plant often search for the exact number to repair or extend an existing panel without redesigning it. If stock for the exact number is the priority, state that clearly in your RFQ so that we can confirm what can be sourced.

Key features of 1469520000

The data sheet for 1469520000 lists the following headline characteristics for the PRO ECO 960W 24V 40A.

  • Nominal output of 960 W at 24 V DC ± 1 %.
  • Input range 85…264 V AC (derating at 100 V AC).
  • Efficiency stated as 93%.
  • Protection degree IP20 with housing: Metal, corrosion resistant.
  • Operating temperature -25 °C…70 °C.
  • Parallel connection option: yes, max. 3.
  • Width 160 mm, depth 120 mm, height 125 mm.
  • Short-circuit, overload and over-temperature protection are listed as: short-circuit, overload, over-heating.

Technical specifications for 1469520000

The table collects the values printed in the manufacturer data sheet. Values that are not printed there are intentionally left out rather than estimated. The GTIN printed for 1469520000 is 4050118275704.

Parameter Value
Order No. 1469520000
Type PRO ECO 960W 24V 40A
Version Power supply, switch-mode power supply unit, 24 V
GTIN (EAN) 4050118275704
Catalogue delivery status This article will no longer be available in the future.
Available until 2026-12-30
Alternative product named by the maker PRO ECO 960W 24V 40A II
Output power 960 W
Rated output voltage 24 V DC ± 1 %
Output voltage, min. 22 V
Output voltage, max. 28 V
Nominal output current for Unom 40 A @ 50 °C
Rated input voltage 100…240 V AC
AC input voltage range 85…264 V AC (derating at 100 V AC)
DC input voltage range 80…370 V DC (Derating @ 120 V DC)
Frequency range AC 47…63 Hz
Inrush current max. 5 A
AC current consumption 4,6 A @ 230 V AC / 9,9 A @ 110 V AC
Degree of efficiency 93%
Power factor (approx.) > 0.98…230 V AC / > 0.98…115 V AC
AC failure bridging time @ Inom > 20 ms @ 230 V AC / > 20 ms @ 115 V AC
Parallel connection option yes, max. 3
Overload protection Yes
Short-circuit protection Yes
Protection against over-heating Yes
Protection against inverse voltage Yes
Residual ripple, breaking spikes <50 mVPP @ 24 V DC, IN
Connection system Screw connection
Protection degree IP20
Protection class I, with PE connection
Housing version Metal, corrosion resistant
Mounting position, installation notice on terminal rail TS 35
Width 160 mm
Height 125 mm
Depth 120 mm
Net weight 3190 g
Operating temperature -25 °C…70 °C
Storage temperature -40 °C…85 °C
Max. perm. air humidity (operational) 5 %…95 % RH
Insulation voltage, input/output 3 kV
Surge voltage category II
Tightening torque, max. 0.6 Nm
Certificate no. (cULus) E258476

Input and output figures should be read together with the derating information in the data sheet. For 1469520000 the nominal output is 960 W at 24 V DC ± 1 %, and the output current is given as 40 A @ 50 °C. A panel designer normally compares the continuous load of all connected devices, adds the inrush of any capacitive or motor-driven loads, and leaves headroom so that the supply does not operate at the limit of its rating at the highest cabinet temperature. The data sheet contains a derating curve, and that curve rather than the nominal value should be used when the cabinet is hot, as is common in Gulf summer conditions.

Typical applications of 1469520000 in Oman and the GCC

A DIN rail supply such as 1469520000 is used wherever 24 V DC or another low-voltage rail is needed for controllers, I/O, instruments and communication hardware. In oil and gas facilities it powers remote terminal units, marshalling cabinets and analyser shelters. In utilities and water treatment it feeds PLC panels at pumping stations, desalination skids and substations. In manufacturing it supplies machine control cabinets, conveyor drives interfaces and packaging lines. Operators of ageing plants in Oman also look for the exact order number when a failed unit has to be replaced during a short shutdown window.

Selection and compatibility notes for 1469520000

When selecting 1469520000, confirm the supply network first: the rated input voltage is stated as 100…240 V AC and the AC range as 85…264 V AC (derating at 100 V AC). Check the available space against the dimensions of 160 mm width, 125 mm height and 120 mm depth, and confirm that the connection system (Screw connection) fits your wiring standard. If your plan includes redundancy, check the parallel connection entry and use external diode or redundancy modules as recommended in the maker literature. Where the data sheet lists an alternative product for 1469520000, compare terminals, width and output rating before treating it as a drop-in replacement, because mounting depth and wiring may differ between generations.

Installation and commissioning of 1469520000

Mount 1469520000 on a TS 35 rail in the orientation given in the data sheet and keep the ventilation clearances recommended by the maker so that the housing can dissipate its power loss. Connect the protective earth first, use conductors within the cross-section range printed in the data sheet, and tighten the terminals to the stated torque. Protect the input with the recommended back-up fuse or breaker, set the output voltage with the adjustment potentiometer if the data sheet provides one, and check the status LED and any signalling contact before loading the supply. Measure the output under load after commissioning and record the value for later maintenance comparison.

Maintenance and spare part planning for 1469520000

For long service life keep dust and conductive deposits away from the vents and terminals, re-tighten terminals during planned shutdowns, and compare output or switching behaviour with the commissioning record. Because 1469520000 may be requested as a spare for a running installation, keeping one unit in a clean, dry store with its paperwork can shorten outage time. Record the order number 1469520000 and the type PRO ECO 960W 24V 40A on the panel drawing so that the right item is requested when it must be replaced.

Related products and ordering notes for 1469520000

Other members of the same product family differ in output rating, width, input system and approvals, so the order number is the only safe way to identify the exact item. Quote 1469520000 together with the type PRO ECO 960W 24V 40A when you contact us. We can also help with related rail accessories, end brackets, redundancy or buffer modules and neighbouring ratings when you are reviewing a whole panel. Lead time and availability are confirmed per request, and no price is shown on this page.

Frequently asked points about 1469520000

  • What is 1469520000? It is the order number of the PRO ECO 960W 24V 40A.
  • Which family does it belong to? The PROeco 2nd generation range is described in the maker’s literature as a twelve-part series of switch-mode supplies built to keep automation plants available, with standard functions, solid efficiency and a three-colour status LED that simplifies service work.
  • Where are the dimensions? Width 160 mm, height 125 mm, depth 120 mm as printed in the data sheet.
  • How do I order? Send the RFQ with the part number 1469520000 and the required quantity.

Documents and quotation

The manufacturer data sheet for 1469520000 contains the full parameter list, approvals, derating information and accessory suggestions, and we can supply a copy of the data sheet with the quotation. To request a quotation, send your RFQ with the part number 1469520000, the type PRO ECO 960W 24V 40A and the quantity you need, plus your delivery location in Oman or the GCC. Please state if you need the exact catalogue number only or if an alternative is acceptable.

Other Models in the Eco Range

Seven Star LLC supplies models from the Eco range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

ModelCategory
Weidmuller 1469470000 PRO ECO 72W 24V 3A Power SupplyPower ModulesView details
Weidmuller 1469520000 PRO ECO 960W 24V 40A Power SupplyPower ModulesYou are viewing this model
Weidmuller 3025590000 PRO ECO 480W 24V 20A II Power SupplyPower ModulesView details
Datasheets & Documents
  • PDF Datasheet PRO ECO 960W 24V 40A Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Weidmüller is a German family-owned maker of electrical connection and industrial electronics products, headquartered in Detmold. The company dates from 1850 and was re-established in Detmold in 1948; it specialised in terminal blocks from the 1940s onward. Weidmüller makes Klippon terminal blocks, power supplies, remote I/O and enclosures, and reported over one billion euros in revenue in 2023.

Seven Star LLC lists Weidmüller PRO MAX power supplies and SAK terminal blocks, and supplies Weidmüller components to panel shops and plants in Oman and the GCC.

Weidmüller company profile

Founded 1850, Germany
Headquarters Detmold, Germany (since 1948)
Ownership Family-owned
Revenue Over €1 billion (2023)
Product families Klippon Connect terminal blocks, PRO MAX and PRO TOP power supplies, u-remote I/O and fieldbus couplers, Klippon enclosures, connectors and tools

Milestones

  • 1850: Weidmüller is founded.
  • 1948: The company is re-established in Detmold.

Weidmüller products listed here

The listed power supplies are DIN rail switch-mode units with 24 V DC output: a PRO MAX single-phase unit rated 180 W and 7.5 A (85 to 277 V AC input), and a PRO MAX3 three-phase unit rated 240 W and 10 A (320 to 575 V AC input). The SAK series is the screw clamp feed-through terminal block family found in many existing panels. Weidmüller now flags several SAK types as being phased out and names a replacement for some of them.

Weidmüller products we list

Family Examples
Power Modules Weidmuller PRO MAX 180W 24V 7.5A DIN Rai…, Weidmuller PRO MAX3 240W 24V 10A Three-P…
Switchgear, Enclosures & Distribution Weidmuller Klippon Connect SAK Terminal…
PLC & I/O Cards Weidmuller UR20-FBC-PN-IRT-V2 u-remote P…

Ordering Weidmüller parts: what we need

Weidmüller identifies every item by a ten-digit order number, and that number is the surest way to quote. Without it, send the type printed on the part. For power supplies add input voltage and phases, output voltage and current. For terminal blocks add the conductor cross-section, color, and the end plates, cross-connections and markers you need, since accessories are specific to each series.

Facts checked against Weidmüller milestone lists and distributor profiles, October 2026.

FAQ

Questions about the Weidmuller 1469520000 PRO ECO 960W 24V 40A Power

Answers from our engineering team on installation, compatibility and integration.

01What is Weidmuller 1469520000?
1469520000 is the order number of the PRO ECO 960W 24V 40A, catalogued by the manufacturer as: Power supply, switch-mode power supply unit, 24 V.
02What are the main ratings of 1469520000?
The data sheet lists 960 W at 24 V DC ± 1 % with input 85...264 V AC (derating at 100 V AC).
03What are the dimensions of 1469520000?
The data sheet gives width 160 mm, height 125 mm and depth 120 mm, mounted on a TS 35 rail.
04Is 1469520000 still available from the manufacturer?
The data sheet shows the status: This article will no longer be available in the future. Available until 2026-12-30. Named alternative: PRO ECO 960W 24V 40A II.
05How do I request a quote for 1469520000?
Send an RFQ to Seven Star LLC with the part number 1469520000 and the quantity. We are an independent supplier and not affiliated with the manufacturer.