Brand:

Siemens 3RV2011-0KA10 SIRIUS Motor Protector Breaker 0.9-1.25 A

Description

3RV2011-0KA10 SIRIUS 3RV2 motor starter protector, 0.9 to 1.25 A, S00

The Siemens 3RV2011-0KA10 is a SIRIUS 3RV2 circuit breaker for motor protection in the S00 frame. Siemens describes it as: CIRCUIT-BREAKER SZ S00, FOR MOTOR PROTECTION, CLASS 10, A-REL. 0.9 to 1.25 A, N-RELEASE16 A, SCREW CONNECTION, STANDARD SW. CAPACITY. It combines a thermal overload release adjustable over 0.9 to 1.25 A with a magnetic short-circuit release that responds at 16 A, in a single DIN-rail device that also serves as a disconnector. Seven Star LLC supplies the Siemens 3RV2011-0KA10 in Oman and the GCC as an independent supplier in Muscat, not affiliated with the manufacturer.

Set within 0.9 to 1.25 A, it is intended for motors of roughly 370 W at 400 V and carries a fixed instantaneous short-circuit release of 16 A, which is the figure to compare against motor starting current. The datasheet gives a motor power of 370 W at 400 V in AC-3 for this device.

Siemens 3RV2011-0KA10 technical specifications

Parameter Specification
Manufacturer / part number Siemens / 3RV2011-0KA10
Product family SIRIUS 3RV2 circuit breaker for motor protection
Frame size S00
Adjustable overload release 0.9 to 1.25 A
Rated continuous current 1.25 A
Trip class CLASS 10
Instantaneous short-circuit release 16 A
Motor power AC-3 at 230 V / 400 V / 500 V / 690 V 180 W / 370 W / 370 W / 750 W
Breaking capacity Icu at 240 V / 400 V / 500 V / 690 V 100 kA / 100 kA / 100 kA / 100 kA
Service breaking capacity Ics at 240 V / 400 V / 500 V / 690 V 100 kA / 100 kA / 100 kA / 100 kA
Phase failure detection Yes
Disconnector function Yes
Ambient temperature, operation / storage -20 to +60 °C / -50 to +80 °C
Dimensions (H x W x D) 97 mm x 45 mm x 96 mm
UL full-load current at 480 V / hp at 460-480 V 1.25 A / 0.5 hp

How the 3RV2011-0KA10 protects the motor and the cable

A motor starter protector does two jobs at once. Its thermal release follows the motor current and trips when the load stays above the set value, here adjustable from 0.9 A to 1.25 A with trip CLASS 10. Its magnetic release reacts without delay to short circuits: for the Siemens 3RV2011-0KA10 the instantaneous release value is 16 A, which is fixed by the device and sits well above normal motor starting current. Phase-failure sensitivity is part of the thermal function, so the breaker also responds to an open phase.

Breaking capacity is stated as Icu 100 kA and Ics 100 kA at 400 V, falling to 100 kA and 100 kA at 690 V. Compare these values with the prospective short-circuit current at the panel. Because the breaker also works as a manual switch and disconnector, it replaces the combination of fuse, switch and overload relay in many small motor feeders, saving panel space and wiring time.

Selecting the 3RV2011-0KA10: ordering checklist

  • Pick the breaker whose range (0.9 to 1.25 A) contains the motor nameplate current, ideally in the middle of the range.
  • Check the instantaneous trip value (16 A) against the motor starting current.
  • Compare breaking capacity (100 kA at 400 V, 100 kA at 690 V) with the prospective short-circuit level.
  • Confirm the frame size: S00, with the contactor you plan to mount below it.
  • Decide whether front or side auxiliary or trip-signal blocks are needed; the device itself has no built-in auxiliary contacts.
  • Typical applications of the 3RV2011-0KA10 in Oman and the GCC

    In Oman and the GCC these breakers feed pump, fan and conveyor motors, dosing and instrument skids and small compressors in utility, oil and gas and water plants. Cabinets in the region run hot, and the datasheet rates the 3RV2011-0KA10 for -20 to +60 °C in operation, so check cabinet ventilation and any derating. The 3RV2011-0KA10 suits motors of about 370 W at 400 V.

    Wiring data, endurance and North American ratings of the 3RV2011-0KA10

    Main terminals are screw type and accept the conductors listed in the table above. The datasheet gives a tightening torque of 0.8 to 1.2 N·m for the main contacts and a screwdriver shaft of Diameter 5 to 6 mm, so use a correctly sized driver and a torque tool. Front protection is IP20 and the type of protection is stated as Increased safety, which is why the device belongs inside a cabinet rather than on an open wall in a dusty area.

    The datasheet gives a typical mechanical life of 100,000 operating cycles and an electrical endurance of 100,000 cycles. For DC networks the breaking capacity Icn is listed as 10 kA at 150 V with one current path, which matters for small DC feeders.

    Safety-related data are given for functional-safety calculations: a B10 value of 5,000 at high demand, a proportion of dangerous failures of 50 % at low demand and 50 % at high demand, a failure rate of 50 FIT and a proof-test interval T1 of 10 y. Use these only within a documented safety calculation and not as a substitute for the manufacturer manual.

    3RV2 motor starter protectors we can supply, compared

    Part number Size Overload range Instantaneous trip Net weight
    3RV2011-1CA10 S00 1.8 to 2.5 A 33 A 323.6 g
    3RV2011-1JA10 S00 7 to 10 A 130 A 327.6 g
    3RV2021-4AA10 S0 10 to 16 A 208 A 338.6 g
    3RV2011-0KA10 (this product) S00 0.9 to 1.25 A 16 A –
    3RV2011-1AA10 S00 1.1 to 1.6 A 21 A –
    3RV2011-1EA10 S00 2.8 to 4 A 52 A –
    3RV2011-1GA10 S00 4.5 to 6.3 A 82 A –
    3RV2011-1HA10 S00 5.5 to 8 A 104 A –
    3RV2011-1KA10 S00 9 to 12.5 A 163 A –
    3RV2021-4DA10 S0 18 to 25 A 325 A –

    Information to send with an RFQ for the 3RV2011-0KA10

    • The full part number 3RV2011-0KA10 as printed on the nameplate or in the bill of materials
    • Quantity and delivery location in Oman or the GCC
    • Motor nameplate current (the 3RV2011-0KA10 covers 0.9 to 1.25 A)
    • Prospective short-circuit current at the panel and system voltage

    Documents and quotation

    A copy of the Siemens datasheet for the 3RV2011-0KA10 is attached on this page, so you can check ratings, dimensions and connection data before ordering. Seven Star LLC quotes against the exact part number, because neighbouring variants differ in coil voltage, range or contact arrangement and are not interchangeable without checking.

    Send the part number 3RV2011-0KA10, the quantity and the delivery point in Oman or the GCC through the RFQ form, and we will reply with availability and lead time. Seven Star LLC is an independent supplier based in Muscat and is not affiliated with the manufacturer.

    Other Models in the Siemens Sirius 3rv2 Range

    Seven Star LLC supplies models from the Siemens Sirius 3rv2 range in Oman and the GCC. Compare the related models below and request a quote for the one that matches your application.

    ModelCategory
    Siemens 3RV2011-1CA10 SIRIUS Motor Protector Breaker 1.8-2.5 AContactors & Overload RelaysView details
    Siemens 3RV2011-1JA10 SIRIUS Motor Protector Breaker 7-10 AContactors & Overload RelaysView details
    Siemens 3RV2021-4AA10 SIRIUS Motor Protector Breaker 10-16 AContactors & Overload RelaysView details
    Siemens 3RV2011-0KA10 SIRIUS Motor Protector Breaker 0.9-1.25 AContactors & Overload RelaysYou are viewing this model
Datasheets & Documents
  • PDF Datasheet Siemens 3RV2011-0KA10 Datasheet Download
Reviews (0)

Reviews

There are no reviews yet.

How would you rate this product?

It takes about 10 seconds — just tap a star. Your email is never published.

About brand

Siemens is the German technology group whose industrial products include SIMATIC controllers and HMIs, SINAMICS drives, SIRIUS and SENTRON switching and protection devices, SIPROTEC protection relays, SITRANS process instruments, SCALANCE networks and process analysers. It was founded in Berlin on 12 October 1847 by Werner von Siemens and the precision mechanic Johann Georg Halske as Telegraphen-Bauanstalt von Siemens & Halske, to build Siemens's newly designed pointer telegraph. Siemens AG is headquartered in Munich and listed on the Frankfurt Stock Exchange; its energy business was spun off as Siemens Energy in 2020.

Siemens company profile

Founded 12 October 1847, Berlin, Germany, as Telegraphen-Bauanstalt von Siemens & Halske, with 10 employees
Founders Werner von Siemens (1816–1892) and Johann Georg Halske (1814–1890)
First product The pointer telegraph designed by Werner von Siemens
Headquarters Munich, Germany (Siemens AG)
Ownership Public company listed in Frankfurt; Siemens Energy (2020) and Siemens Healthineers are separately listed companies
Businesses acquired that appear in our range Moore Products (bought in 2000; APACS and QUADLOG control systems), Applied Automation (Maxum process gas chromatographs); small industrial gas turbines such as the SGT-300 came with Alstom's industrial turbine business in 2003
Product families SIMATIC S7 PLCs, ET 200 distributed I/O and HMI panels, TIA Portal software, SINAMICS drives, SIMOTICS motors, SIRIUS and SENTRON low voltage devices, SIVACON switchboards, SIPROTEC relays, SITRANS instruments, SCALANCE network components, building technology valves and sensors

Milestones

  • 1847: Siemens & Halske starts work in Berlin with 10 employees.
  • 1848: The company wins the contract for Europe's first long-distance telegraph line, Berlin to Frankfurt am Main.
  • 1856: 330 employees, two-thirds of them working on telegraph networks in Russia.
  • 1866: Werner von Siemens describes the dynamo-electric principle, the basis of the electric generator.
  • 1958 onwards: The SIMATIC name is used for Siemens industrial automation; S7 PLCs follow in the 1990s and S7-1500 in 2012.
  • 2020: Siemens Energy is spun off and listed separately.

Choosing Siemens automation products

A Siemens order number (MLFB) identifies the exact product: 6ES7 is SIMATIC automation, 6AV is HMI, 6GK is industrial communication, 6SL is SINAMICS drives, 3R is SIRIUS control and 5SY is SENTRON miniature circuit breakers. For PLCs, S7-1200 is the compact controller for small machines, S7-1500 is the current mid-to-high range controller, and S7-300 and S7-400 are older platforms still running in many plants; S7-300 is being phased out, so spares and migration to S7-1500 are common requests. When replacing a CPU or module, the full order number including the version digits matters, because firmware and hardware versions affect compatibility with the existing project.

Where Siemens products are used

In Oman and the GCC, Siemens automation runs in oil and gas, power and desalination plants, water networks, cement and process industries. Maxum gas chromatographs analyse gas composition in gas plants and refineries, SIPROTEC relays protect substations, SGT-300 turbines drive generators and compressors, and Siemens building valves are used in HVAC systems.

Siemens products we list

Family Examples
SIMATIC controllers and I/O S7-1500, CPU 1515-2 PN, S7-1200, CPU 1214C, S7-300, S7-400H CPU 412-5H, ET 200SP, IM 153-2
HMI and networking KTP700 Basic, TP700 Comfort, TP1200 Comfort, SCALANCE XC208, SCALANCE WAM766, PROFIBUS OLM
Drives, motors and power distribution SINAMICS G120C, SINAMICS G120X, 1LA7 motor, SIVACON S8, SIPROTEC 7SJ85, 5SY4510-7 MCB
Process instruments SITRANS P320, MAG 5100W, SITRANS TH320, SITRANS TS500, SITRANS TR200
Maxum II analyser spares FID 302A detector, FPD II assembly, filament detector, Model 50 valve, SYSCON kit, air bath heater
APACS and QUADLOG spares QLCCM24AAN, QLSAMBAN, QLSDM024DCCBN, 39SAMCAN, 16137-151 M-BUS cable
Building technology VPI46 PICV, VPF44, QFM1660 sensor

Ordering Siemens products: what we need

Send the full order number from the label (for example 6ES7214-1AG40-0XB0) and, for PLC and HMI parts, the hardware and firmware version (FS and V numbers). For Maxum II and APACS spares, send the Siemens part number such as 2021651-002. For drives, add the motor power and supply voltage.

Frequently requested Siemens models: Siemens IM 155-6 PN ST ET 200SP Interface Module 6ES7155-6AU02-0BN0, Siemens SGT-300 Industrial Gas Turbine.

Facts checked against Siemens's published history timeline, October 2026.

FAQ

Questions about the Siemens 3RV2011-0KA10 SIRIUS Motor Protector

Answers from our engineering team on installation, compatibility and integration.

01What current range can the 3RV2011-0KA10 be set to?
The thermal overload release is adjustable from 0.9 to 1.25 A. Set it to the nameplate current of the motor, and check the instantaneous trip of 16 A against starting current.
02What is the breaking capacity of the 3RV2011-0KA10?
The datasheet gives Icu of 100 kA and Ics of 100 kA at 400 V, and 100 kA and 100 kA at 690 V. Compare the figure for your voltage with the available short-circuit current.
03Does the 3RV2011-0KA10 replace an overload relay?
Yes, the breaker contains a thermal overload release with trip CLASS 10, together with the magnetic short-circuit release. Only a contactor is needed for a complete direct-on-line motor starter.
04Which contactors can be combined with the 3RV2011-0KA10?
The datasheet lists combinable contactor sizes of S00, S0. In practice this means SIRIUS S00 and S0 contactors such as 3RT2015-1AP01, 3RT2016-1AP01, 3RT2017-1AP01.
05What size is the 3RV2011-0KA10?
It is a S00 frame breaker measuring 97 mm x 45 mm x 96 mm . It snaps onto a 35 mm DIN rail.